Cordless Drill

ARGGH!

The 2 batteries on my 2007 Dewalt cordless drill finally died, so I needed replacements.  The original equipment batteries are no longer available.  So I searched for replacements.  Eventually, I decided I just couldn't trust the replacement sellers.  Doing reviews of the companies, 2 came up "suspicious" and I doubt the others were any better.

So, new drill needed.  I checked 3 sites about the best new drills.  Wood Magazine, Consumer Reports, and a "Best tool" site.  Each varied considerably in recommendations.  That sort of thing can drive you crazy!  You would think ratings from a woodworking magazine and Consumer Reports (both of whom do detailed tests) would mostly agree.  They didn't.  And a "best tools" site might have a commercial bias. 

Reviews of all of the top few drills had many negative reviews on other sites.  It is altogether maddening!

I settled on one Dewalt drill based on experience with Dewalt tools in general, their consistently high brand rating, and some ratings.  And then couldn't find it for sale ("not in stock").  So I gave up.  

I went to Amazon, thinking I had found it.  It had a 5 star rating.  Yay.  Ordered it immediately. When I got the order confirmation from Amazon, I realized it wasn't the one I thought I was buying.  (GRRR).

Well, a drill is a drill is a drill and it got 5 stars from purchasers.  So, I won't cancel the order.  It comes with 2 batteries, a case and a charger.  If it lasts 17 years like the previous Dewalt drill, it will be well worth it.

The old one built 400' of fence, a 2 level deck, paneled the basement, and did endless odd-jobs for 17 years.  That's enough.  Time for a new one.

New Heat Pump

Trane came and replaced the heat pump friday!  Since they were schedulaed to arrive between 7-8 AM, I had to get up at 6 AM to be dressed, fed and ready for strangers.  Which also meant feeding the cats, herding them into the bedroom the day, and cleaning the litterboxes.  Naturally, they were late (but only by 30 minutes).  Which was OK because I barely finished breakfast.

First, they disassembled the indoor part.

And removed it...

Then removed the outside unit.

I tried not to bother them too much.  I know contractors hate that.  But these guys were pretty friendly and I did have a few questions along the way.  So I showed up quietly every 30 minutes or so mostly just to observe the progress.

And because of a friend's bad experience once, I glanced around to make sure none of my more "interesting" tools or equipment was missing.  Me friend had some serious theft while his house was being renovated (he got it all back because the thief was really stupid).  They did borrow one of my tools, but it was back on the rack before they left.

But I love to watch things being done.  I usually learn something useful...  Knowing what the inside of enclosed equipment looks like has allowed me to fix a few things myself for free.  For example, once the old unit started leaking water on the basement floor, and I had seen a water collection tray that looked kind of flimsy.  But I knew where it was inside.  So I remove that sheet metal panel, found a loose bracket and re-leveled the tray tightly.  👍

So they finally got to the part about installing the new outside unit.  Which seemed to take forever (but without them seeming to be doing anything with it), so I went out to take a look while they were busy inside.  

There was some noise that worried me, but it turned out to be some equipment that was temporarily attached.  I think it was either a power pack to run the equipment diagnostics before they hooked it up to the house current, or while they were hooking it up to the house circuit box OR it was pumping coolant into the system.  I didn't bother them about it; they were still working.

Whatever it was, it got turned off and detached eventually.  Because they only attached the outside electric cables after they detached it, I'm guessing it was a temporary power supply for testing purposes.

So here is the new outside unit.  It's big.  The old one reached my waist; this thing reaches my shoulder.  And it has a cover to prevent rain/snow/sleet.  The previous unit had a separate electric thaw system.  Because of the size, the ventilation slots around the casing reduce heat build-up in Summer.  

Everything about this unit suggests better operation and long life.  I think I am going to be happy for a long time.  

The last thing they did was install a new thermostat.  My previous one was digital, but only like a clock is digital.  That display showed all the choices and had about 4 manual buttons.  Easy to change from heating to cooling, change the temperature target, and control the fan.

The new one looked more like a smartphone app.  I can even control it with a smartphone if I want to (I don't).  And it is programmable (which doesn't work well for my rather unsheduled life).  But when I had the guy show me how it worked, it was actually simple to control manually.  In non-programmable mode, it is just a touch screen instead of manual buttons (whew). 

Touch the screen and it wakes up.  I can touch "heating/cooling" to change that, up/down arrows for changing the target temperature, and "fan" allows 3 choices (on when "unit is on", on all the time, or a 10 minute on/off cycle).  There are other touch choices, but those are for programmable scheduling mode and I have no need for that.

I should explain that.  I've mentioned I keep an irregular schedule.  I just sleep when I'm tired (or bored).  Sometimes I go to bed at 10 PM, sometimes I go to bed at 2 AM, and sometimes I just stay up all night.  No way can I program the thermostat for that.

Back when I had a regular office job, I had a fancy programmable thermostat.  And I should mention that (year-round) I kept the house at 76F daytime and 68F nightime weekdays.  Kept it 72F daytime on weekends.  And that worked (the thermostat allowed you to choose days).

Now that I'm retired, it's 72 and 68 everyday (I sleep better a bit cool).  But as I said, the hours are regular anymore.  So non-scheduled works for me. 

So here are the results after 2 days...

The Trane unit works better than any York or Ruud unit I have ever had!  It cools and heats quickly.  The previous unit took 4 hours to cool the house 4 degrees F.  This one takes 30 minutes either heating or cooling.

It is unbelievably quiet!  The previous unit made some noise even when new that I could hear in the bedroom at night (the outside unit is right under my bedroom window).  It was mostly just fan noise at first, but by the end it sounded like motorcycles driving up and down the street.  

This Trane unit (an XL) is so quiet I didn't even think it was on.  But standing close to it, I could barely hear it when it was operating.  A kitchen temperate probe thermometer set into a floor vent says it sends out 54F air.  That's actually higher than the previous one (which did 44F when new), but it is more powerful (3.0 tons airflow to 1.5).

And it is extremely energy-efficient.  Before I chose to buy an XL Trane, I visited several websites that seemed to be either expert testers (like Consumer Reports) or non-brand-oriented sites created by experienced but independent heat pump repairmen.  

The general consensus was that the XL Trane should pay back the cost in electrical use and lack of repair costs in 10-12 years.  And since they also said the Trane unit should last 15-20 years, that almost suggests I get it and use it for free!  

The concept bothers me slightly.  There ain't no such thing as a free lunch.  But I have to admit that, if a piece of equipment uses only 75% of the electricity and lasts 2x as long, you have to be gaining something somewhere!  So, I am very pleased (even if it is just the ultra-quiet operation).  

But I have a gripe!  The Trane unit uses a different size air filter than the previous unit.  I like to order good-quality filters in bulk.  So I went to pull the new filter out.  I wanted to know the brand and MERV rating (thats the size of various pollutants it can filter).  I can't (without damaging it, I think).  It catches inside somewhere.

So before I have to replace it, I ordered a dozen the same size but MERV 11 rating and duration (3 months) I usually do from Amazon.  When they arrive, I will force the new one out to examine it.  If the new ones are also hard to put in and out, I will call the Trane company and suggest they didn't construct the filter slot well (it was manually shaped on site).  That could get awkward, so I sure hope the new ones fit easily.

But overall, this Trane is by far the best heat pump I've ever had.  But I'll know better about that in 10 years.  With luck, this will be my last heat pump.

Ooh, I have to mention this too.  My electric co-op sends users a $100 -150 check anytime they use less electricity than the same Quarter of the previous year.  And the new Quarter starts June 1st.  If the new Trane is as efficient as they (and neutral websites) claim, I'll get a nice bonus!

Waiting On Trane

I sure will be glad when the Trane heat pump installer arrives Friday morning.  This week hasn't been too bad.  It got up to 79 inside last Friday or Saturday and today.  Two exhaust fans and 2 open windows made it tolerable.  It seems weird when it is warmer inside than outside in May.  

Well, the physical house structure retains heat and takes a long time to cool.  I also have enough appliances that produce heat on their own, and I do cook dinner every day.  Plus, I had the whole house insulation improved some years ago so if heat/cool doesn't go out open windows or doors, it doesn't go out at all.  Normally a good thing, but not right now.

I've been lucky with the weather this week.  May can get pretty warm here, but it has stayed in the 70s daytime and gets down into the 50s at night.   So at least it isn't Mid-Summer, which is when my heat pumps usually fail.  Today and Thursday are forecast to stay cool, so that gets me to Installation Day.  Yay!

I'm prepared.  All the weeds around the current outdoor unit have been pulled up or cut down.  Everything with 5' of the indoor part has been moved away.  I've cleared off the workbench nearest the indoor part so the installer has some space to place tools.  I'll move the car out of the garage the night before so he has an easy direct route from his truck to the basement.  Everything but drinks and snacks and if he wants them, I have them!  😀

The Non-Joy Of Repairs - Resolution!

The current heat pump company was jerking me around a bit.  The Boss did call, but he was giving me conflicting information too.  So decided to consider a brand new company.  I tired of replacing these units every 8 or so years! 

I trust Consumer Reports, so I visited their website.  I was shocked.  The brand I have used for 30 years was near the bottom of the ratings chart.  It was listed as below average in virtually every category!  At the top were Trane and American Standard.  

Everything Consumer Report said about both was outstanding.  Most modern technology, quiet, efficient, long-lasting, etc.  Other good news from CR was that the energy and durability saving would pay for the unit in 12 years (less than the life-expectancy of the unit.  The bad news is that it is (of course) more expensive.  I've never heard of American Standard, so I called the local Trane dealer.  

A dealer Rep came out the next afternoon and examined my existing system, estimated the cubic feet in the house, measured the available space where the indoors portion would go, examined the ductwork capacity, etc.  He said the duct capacity was fine, that the indoor unit needed to be replaced  (the mechanical parts of course, but also the fan and condensation-removal mechanism.  And BTW "Your current 1.5 ton unit is underpowered for your house".  Which meant that the previous heat pumps had been laboring both too long and too hard (thus wearing out faster and costing me a lot in electricity).

He sent a proposal later that day.  He offerred a unit that Consumer Reports said was their better one.  He upped the capacity to 3.0 tons, applied a State and my energy co-op credits to the proposal (they simply reduce my costs immediately in the proposal and Trane gets it back on their own).  They will also haul away all the old equipment and install a better thermostat.  The unit can be expected to last 15 years.

Then there was the cost.  It was higher than I expected.  Let's just say "ouch"!  But it seems worth it and I can afford it.  I sent a 50% deposit immediately and received acknowledgement immediately.

Unfortunately, they can't install a new unit until Friday.  And the poor A/C from the existing unit failed that evening.  My house was not designed for good cross-ventilation.  And while it is not mid-Summer with 90F temperatures and high humidity, it got to 80F inside quickly.  I opened 2 screened windows and turned on the kitchen and bathroom exhaust fans, but it stayed warm inside.  In fact, despite it being cooler outside than in, I couldn't get it below 78F.  

I can't sleep well above 70F.  You probably think I'm a wimp (and I suppose I am).  So some history.  As I kid, I grew up in New England.  Staying warm was the whole point there.  When I was 13, we moved to Virginia.  Staying cool there was the effort.  At first it was pre-air-conditioning.  I lay in bed sweating every Summer night.  

After a couple years, Dad bought a used stand-alone A/C.  But he was (koff, koff) "thrifty".  It was only turned on in the evening.  It was often hotter in the house than outside.  We used to sit on the front or back steps after dinner and watch the "heat lightening" until it cooled down enough to stay inside.  I was still miserable at night.

When I was 13, we moved to Maryland (which is not exactly New England either).  Dad tried to get away with installing a 3' fan in the bedroom floor ceiling, but that never helped much.  Finally, he bought a 2nd hand window A/C (again, only to be run at night).  

Couple years later, I left for college.  The dorms had rooftop A/C units.   Later I was in A/C apartments and then a house and A/C offices.  I have not been without A/C for 55 years!  You get used to what you live with I suppose.  If there was no such thing as A/C, I suppose I would have gotten used to the absence of it decades ago.  And houses would have remained designed for the lack of it.

So this week without A/C is a bit hard.  I sure will be glad when the new unit is installed.  

Lost The Checks, Part 3

In the previous post, I described the frustrations dealing with Walmart's Check Printing Service.  I messed up the first order because their website was confusing.  The checks arrived short 4 digits of my bank account number and therefore unusable.

So I called them and an agent helped me get it all entered correctly.  Walmart sent me an email several days later that the checks had been shipped.  Then they emailed me saying they were recalling the package due to "security reasons" that they would not explain.

But I kept getting tracking data say that the package was moving in my direction.  So I thought maybe the email was in error, that they had changed their minds, or that they couldn't get it back from the US Post Office.

A package did arrive.  It was the extra check register I had requested...  Whoop-de-doo!  I fired off an email to Walmart telling them how angry I was about the whole thing in the strongest language I thought might avoid a defamation suit and telling them I would mention my unhappiness at every oppurtunity.  I'm sure Walmart is quaking in their boots...

So I called my bank and threw myself on their tender mercy.  I knew getting checks through the bank would be expensive, but at least surely they knew who I was and would make sure the checks were printed correctly.  And it occurred to me that my blank checks might be out there" in some stranger's hands, so I assumed I needed to get my account number changed and that required a personal visit.  I made an appointment.

An hour beforehand, a bank representative called to ask exactly what I thought needed to be done.  I exlained, and she said she thought she could help me without a personal visit.

First, she said I didn't need to change the account.  That it would take some effort on my part because I had automatic deposits and payments.  She said she could just put a hold on the missing checks.  Since I didn't know the exact check numbers, she said she would just put a stop order several hundred numbers ahead.  I asked about the fee and she said she would waive it.  Wow!

So she asked about new checks numbered after the stop range.  I asked the cost.  She said $36 for a box of checks (100?).  I said "Wow, Walmart only charges $3.95".  She said she understood that, and was waiving the cost of the checks as well.  WOW!

I used to buy theme checks.  Pale ones so that I could see what I was writing.  Landscapes, hummingbirds, cats...  Some choices are positively psychedelic.  I don't understand how anyone can even write of those.   But checks are barely used these days.  And I have no personal need to impress my water/sewage company, the IRS, or magazine subscription companies.  I opted for a pale blue.  I use black pens.

I got a shipping confirmation from the bank's printer.  It said delivery by July 4th.  Pretty darn slow considering they are coming from only 200 miles away (New Jersey), but free is free.  But I received a delivery update changing that to June 29.  And since they are being delivered by the US Post Office, I bet they arrive sooner.

Funny afterthought...  The check printer is in "Mountain Lakes, NJ".  To my knowledge, NJ is almost as flat as a pool table.  I can't picture either a mountain or a lake in NJ, LOL!

Today is the 1 month anniversary of trying to get replacement checks.  It has been an adventure.

Some people have car problems that get fixed.  Some people have appliances that need to be replaced.  Some people have leaky raingutters that get fixed.  I never have normal problems.  On the other hand, my strange problems are never all that serious, just oddly frustrating.  I am satisfied to have only odd but non-serious problems.

So in that sense, they are almost funny to have and write about...

Mac Mini Upgrade

AFTER I figured out just WHAT I was trying to upgrade, it took about 3 days and separately 13 hours.  Well, I did have old programs...  And I thought it was a good idea to allow everything the MacKeeper software suggested in the full scan.

Everything went bad for several days,  but I think we are back in business.  The last struggle was to get the Firefox bookmarks back.  Bizarrely, Firefox-On-Mac now seems to "promise" that everytime you upgrade, they wipe your bookmarks.  As if that is a good thing.  I don't know how it works on Windows. 

But I found guidance about restoring an "old profile" and that seems to be the key to keeping bookmarks.

The new "look" is  white text on a black background.  It was a real surprise, and it doesn't look all that bad, but I found a way on "display" to restore that!  Jut getting things working again is good enough for now.

And, so far as I can tell, I got all my other programs updates to work with Mac OS Catalina 10.15.2, not that I see the benefits yet.  I'll play around on the puter to see if everything works. 

If anyone else is having similar problems, I may be able to help for a few days before the info fades away in memory.

BUT, I looked up the newer mac mini...

I went for a full new one.

So I just ordered the new mac mini.  It seems impressive.  The current one lasted 5 years.  The new one will probably last longer (seems about 5x the memory) AND it is a lot faster (and the current one still has the "slows" after all my work).

Cheers!

A Week In The Life...

Some weeks, problems accumulate...

1.  Naturally, I had to order more cat food just as the snowstorm struck.  2 boxes of 8 trays total, scheduled to arrive Wed and Thurs.  Well, I had the driveway and sidewalk cleared of snow Sunday, but I didn't shovel the front steps.  Figured I would most of it melt and shovel the remainder Tuesday afternoon.  The first box arrived Tuesday morning.  UPS left it at the garage door.  So I pushed the box inside the garage.

I forgot about the box when I decided to drive out for some errands Wed.  Well, you would be surprised at how many cans of cat food an SUV can crush beyond use...  ARGHHH!

2.  The outside unit of the heat pump stopped working.  I'm getting normal heat via electrical induction from the inside unit (like an oven), and I suspect it isn't costing MUCH more than the usual heating (some normal furnaces routinely operate that way).  I have been trying a few things hoping the outside unit will just "start" again.  I shovelled the snow from around the unit where air comes in, scooped out accumulated snow inside the unit, poured hot water over the insides hoping some ice was preventing operation, pulled and re-inserted circuit breakers, etc.  No luck.

But when the block of ice inside the outside unit finally melts and it doesn't start working normally again in a couple of days, I will have to call for repairs.  I didn't call immediately, because I AM getting heat, and I know they take complete failures as emergencies first.  Besides, they always want to just replace the whole unit. 

3.  My automatic garage door openers stopped working.  The overhead door light just blied rapidly.  That probably means something, but I couldn't find the manual.  But it isn't THAT hard to just raise and lower the door manually.

So I checked the power supply, circuit breakers, spring attachments, possible blockages, etc.  No luck.  Finally, I followed the wiring down to the bottom of the garage door track.  Well lookee there!  There is a set of safety lights at each side.  If the light beam between them is blocked, the system shuts off.  One of them had gotten pushed off.  Well, I guess when I ran over the box of cat food, I also pushed it into the light beam device.  Took just a minute to get it clipped back on and aimed properly. 

At least SOMETHING got working again.

4.  I mentioned previously that I had set up a regular birdfeeder on a pole on the deck to feed the non-finch birds sunflower seeds during the snowstorm.  They emptied it today.  The stepladder is still buried under the deck snowdrift, so I figured I would just untie it and set it down flat to refill it, and them put it upright again and retie it.  Brilliant but dumb idea!

The instant I untied the last know holding the pole tight, a strong gust of wind hit.  So there I was holding the bottom of the pole while the heavy top started to fall over.  I couldn't hold it up.  The feeder can crashing down on the deck.  The wooden feeder broke into 4 pieces!  I said a few BAD WORDS.  But what is done is done, and you go on from there.

I took the pieces down to the work bench and set about regluing the pieces (with exterior waterproof wood glue).  It took 12 bar clamps (you can never have too many bar clamps).  The feeder is back together, but it has to set until tomorrow morning.  I started to put out a tray of seeds, but even with a brick in the tray, the wind was slowly pushing it around.  And even if I clamped the tray to the deck rails, the wind would probably just blow the seeds out.  Sadly, the birds will have to wait til I get up in the morning...

5.  The trash company didn't show up for regular pickup today.  I'm leaving it out by the street.  I recycle and compost so much that about the only thing that goes in the trash is used cat litter, styrofoam,  and chicken skin.  And I out the chicken skin IN the litter bags.  So I feel pretty confident that NO scavenger is going to bother MY garbage can!  LOL!

BTW, I drove out today and saw a neighbor's TRASH can knocked over and the contents spilled out.  It was ALL cans and bottles.  All recyclable.  Aw c'mon...  We get free street-side recycle pickup and you don't even have to sort it.  Are they ACTIVELY against recyclying?

6.  This one is a bit long...  My waterbed sprung a leak.  That happens.  I have a repair kit.  I've probably patched it a dozen times (the waterbed mattress is at least 35 years old).  I only noticed when I pulled the sheets up for washing and the edges in one corner were wet.  I pulled up that corner of the waterbed. I thought it was wet cat food at first (because there was some there), and thereby hangs a short tale.

Ayla eats only in the bedroom, and sometimes she decides on some odd places.  That morning she had decided she would eat on the bookcase headboard of the waterbed.  I sure don't argue about it.   It's not like she gets to make a WHOLE lot of decisions in her life, so I give her the ones I can. 

That afternoon, when I pulled the wet sheets up I found her bowl tucked into that corner.  WOW!  I sure didn't think there was THAT much water in canned cat food (and it didn't smell like anycat had peed there).  But the cause and effect seemed clear.  So I cleaned up the spilled cat food, wiped it clean, and stuffed an old towel down to absorb the water.

Well, THAT wasn't the problem.  There was TOO much water the next morning and the towel was soaked.  So I pulled the corner of the waterbed up (which is not easy - water is heavy).  And I found a strange little piece of sharp metal.  I can't identify it, but I assume it took a while for it to slowly wear through the waterbed mattress. 

I can't get a patch to hold in the corner unless I drain the mattress and remove in entirely.  And even that might not work.  So, after all these years, I think I will replace it.  It's OK, they aren't expensive.  $50 to $200 depending on whether you want baffles and lumbar supports etc.  But I'm used to the cheap kind with nothing fancy so I will stick with that.

There COULD have been a better time for this.  All my hoses are outside and too cold to uncoil without maybe causing a break.  But at least the forecast calls for 50F temperatures Sunday, so I can probably get one into the basement undamaged and let it warm up inside.   One of the problems with a waterbed is draining them.  That can take a couple hours.  And then you have to fill the new one.  Filling a waterbed takes about 30 minutes from the outside spigot, and it takes all day for the heater to warm the water. 

Fortunately, my basement laundry tub faucet has a garden hose screw fitting.  But my water heater doesn't hold enough hot water to fill the king size waterbed mattress.  So it will be a balancing act to get the heated and cold tub water mixed right so I can sleep on the new mattress the same night as I empty it.

I'm probably not saying this clearly.  I have to get up in the morning, drain the old mattress, remove it, pull up the old liner (old and worn out) dry the wood frame, set the new liner in place, set in the new mattress, fill it, get the water warm enough, and put the mattress pads and sheets back on.  My recollection from the last time (30 years ago) was that took all day.  So I will be in for a very boring (watching a waterbed mattress fill up is like watching paint dry), but dedicated day...

7.  I had a mouse invasion.  Marley caught 5 mice!  I initially blamed the snow for making mice seek shelter, but it might have actually been my fault.  Last Friday, when the snow began to fall, I brought a few tubs of planting soil into the basement to thaw out so I could plant leftover Spring bulbs in them for forcing by Spring.  There MAY have been mice nesting in them in the leaf litter covering the soil. 

I HOPE he caught them all regardless of how they got inside.  Probably.  There were 4 caught one day, I found a 5th in a bucket the 2nd, and none for 4 days.

Quite a week!

Appliance Failure

I hate it when major appliances fail.  They're "major" appliances not just because they are large, but because they are expensive and important (My M/V might object to being left out of the group since I use it daily).  And it takes some research and time to replace them.

Minor appliances are easy.  Your M/V fails, you get another anywhere in 30 minutes.  Same with toasters, slow-cookers, fans, radios, clocks, etc.  But try to replace a dishwasher in less than a week...

Anyway, I noticed after my usual dinner binge of opening and closing the refrigerator a dozen times for this or that, that the thermometer was up to 50F.  I keep it at 35-37F, and that is the middle cold setting (4 out of 7).  But I use a lot of fresh foods and it warms up briefly inside being opened so much.

But when I went to put leftovers away an hour later, it was still 50.  Uh, Oh!!!  Hoping it was the refrigerator thermometer, I also stuck my digital cooking thermometer probe in there.

I checked for internal airflow blockages, but it is designed so that blocking the internal airflow is nearly impossible.  I distinctly recall from the manual that no cleaning of external coils is required, and indeed after pulling the refrigerator out a few inches and shining a flashlight behind it, there is nothing to clean.

This morning, it was still 50!  *GLOOM*

I've gone through a few refrigerators in my time.  It's always the condensor, and replacing the condenser is most of the cost of a new refrigerator.  But you pay $100 for the serviceman to tell you that.

So I jacked up the cooling button to max.  After 4 hours, it got back down to 37F.  I can live with that for a week while I choose a new refrigerator.  But it does mean that a lot of stuff was held at 50F for 36 hours.  Which means stuff like mayonnaise and salad dressing are dangerous.  I don't keep fresh meat, so no loss there.  Veggies and fruits are safe.  You can tell when they go bad anyway.  So I haven't lost much food.

With the cooling selection on "maximum" I can wait a few days.  At least it's not like having the A/C die in the middle of Summer or the Furnace die in Mid-Winter...

The choice for a new one is ongoing.  When the previous refrigerator died (sadly only 5 years ago) I replaced it immediately without doing much research.  I like bottom-freezer models and I went to one store and bought the cheapest most energy-efficient model they had in black.  Bad move...

This time, I'm going for the largest, best temperature-recovery time, bottom-freezer, with slide out shelves, in black, high-reliability-rated refrigerator I can find that will fit in the space.  Right now, according to Consumer Reports magazine website, that seems to be a Kenmore Elite 79043.


I decided to ignore the energy-efficiency rating.  I don't do that lightly.  But I discovered something surprising about refrigerators.   The big low-efficient refrigerators cost about $59 per year to operate.  The best-efficiency (with slow temperature recovery times) cost about $40 per year.  The difference is irrelevant.  Why would I want a refrigerator that ages my milk faster each week to save $19 per year?

Its not like choosing a car that saves $1,000 in gas per year...  $19 is the difference between most and least energy costs?  Who cares?

There is more to the decision.  I keep an older refrigerator in the basement for bulk veggie and fruit storage, garden seeds, beer, wine, bird suet, sodas, etc.  I bet it is so energy-inefficient that I've paid for a new one several times over.  I should have replaced IT years ago...

So the new one will go in the kitchen, the current one will go in the basement (where 50F is just fine for the things I keep there), and the deliverymen will haul away the oldest one for junk.

Looks like I am going shopping at Sears tomorrow!