Garden Watering Stand

I like to keep the garden watered, but it's boring.  It's wasteful to use an oscillating sprinkler on the raised veggie beds because of the walkways between them, and the flowerbeds are too narrow for one.  It is too boring to just stand there and water all the beds by hand.  I have drip irrigation hoses, but they all broke off at the raised brass couplings under the weight of the snow 2 winters ago (haven't quite figured out how to repair them).

I had developed a rather convenient way to water them all a patch at a time using a fat hose nozzle and a spading fork.  I stabbed the fork in the ground abut 10' away and nestled the fat hose nozzle (shower setting) in the fork's D handle.  But that required getting the garden fork firmly in the ground at each 6' section or raised bed.  Naturally, if I needed to water the beds, the lawn soil was rather hard to penetrate with the fork.

I needed a better way.  My first thought was a pole with a clamp on top and a flat "X" at the bottom with spikes to "step" into the lawn.  I couldn't find any parts like that, and I'm not a welder.  Then I looked at my camera tripod.  It looked a bit flimsy, needed some kind of attachment at the top, and I wasn't sure how waterproof it was.  But a tripod seemed the way to go.

I built one using pressure treated wood and stainless steel hardware.  The PT wood is 2x2"deck balusters. The tripod is designed with 1 forward and 2 back legs.  It is 2 back legs to resist the backwards force of the water and the weight of the hose.

The balusters come with pointed ends.  I wanted the points for the bottoms, but I wanted flat tops to attach a nozzle platform.  So I cut off the tops of each of the 3 balusters.  Then I cut 3" off the 2 back legs to use to widen the attachment surface.  Two pieces of scrap wood added some width.  It was all glued and screwed to the front leg.

Next, I used a tapering jig on the tablesaw to cut angles for the 2 back legs to attach to the front leg.  They are shorter because I used 3" to make the top attachment surfaces, but also because the front needs to be longer to create an upwards angle for the nozzle platform.  That will make more sense in the last pictures.  I can't give an exact angle for the cut (I really just overlayed one on the other and eyeballed the "right" spread).  It looks about 30 degrees though.

I needed to drill a hole through the 3 legs for an axle bolt.  I rigged up some stops and supports on my drill press for the 2 angled back legs.  The front leg just needed a spacer to account for the platform support.

It looks like this when the bolt and nut is put through all 3 legs.   This holds the legs all at the angles.  But I also wanted to be able to store it easily for the winter.  That meant being able to collapse it.  So I took the back legs back to the drill press and lifted them up slightly to angle the holes. 

I may not be explaining that well.  To store it, I wanted the 3 legs to compress flat to each other, and the lengthened hole allowed that.  And so that the bolthead and wing nut (for tightening securely on a flat surface, I used a forstener bit to make an angled hole the size of the flat washers.  I don't have a picture of that, but it will be obvious when/if you make one of these yourself.

Notes:  1, The washers between the legs were removed later.  I realized I DIDN'T want the legs to slide easily when being set up.  2,  The spacer washers below the wing nut are there because the wing nut catches on the wood before the bolt is tight.  3, Use a bolt with threads the whole length.  The bolts with about 1" of threads don't have enough thread length.

Here is the tripod in the storage position.  That's what I mean by "compressing flat" and why the back legs have elongated holes. 

Here is the tripod set up, minus the hose nozzle platform on top...  You can see that with the front leg longer, it creates an upwards angle.

Here is the finished tripod.  A piece of PT board is glued an screwed to the platform support on the front leg (the screws are countersunk under the wand nozzle).  Copper clamp-downs hold the wand in place with pan-head exterior screws.  A wand nozzle is much easier to attach than a standard nozzle.  The wand, BTW, has the most uniform spray of any nozzle I have ever tried.  This brand is Melcor; others may be just as good.

To relieve hose-weight pressure on the wand, I attached an angled  hose connector.  I have quick-connect attachments on all my hoses and attachments.

And here is the watering tripod in action!  Adjusting the angle of the front leg easily adjusts the angle of spray.

It's easy to move from spot to spot, stores nicely, and should last decades!

Pictures Again!

I've been a bit frustrated lately, often not being able to get pictures into the posts.  They would upload in the Choose Files box, but would not transfer to the post.  I even posted a question on the Blogger Help forum (no replies).  So, today I tried the new Blogger interface, and pictures load properly.

Hurray!

I am showing the pictures of the "Poor Old Storm Drain" to add to THIS POST today...

The overview...  Yes, believe it or not there is a 4x4x4 foot brick well and heavy metal grate under there!

At first, I tried to pull the debris off.

Most of it was too entangled.  I wasn't surprised.  The last time the drain was like this, the County needed power equipment!

But I stopped trying as soon as I saw that the brick structure was broken!  You can see part of the brick wall is at an angle.

I also noticed that the metal grate on top is actually shoved OFF the brick structure!  You can also see that the woody debris is packed so tightly that stones washed over the top and wouldn't fall through.

I called County Maintenance and reported the problem.  They politely took all the information, but wouldn't suggest a repair date.  I'll be happy to see them out here by next Spring.  That's about how long it took the last time.  However, I will say that they do good work when they come.

A Redo On The Lawn

I haven't re-seeded the lawn in years and there are thin/bare spots.  So before Tropical Storm Lee came through, I thought I would take advantage of the predicted rain for the week to keep new grass seed wet while it germinated.

I didn't realize how MUCH rain there would be and how HARD it would fall at times.  Some of the seed I put down then has germinated - in thick separated bands.  It looks like the lime markers on a football field!  And all the formerly bare spots are still bare.

So much for THAT $42 worth of grass seed!  So, today, I bought another bag and I re-seeded the lawn after mowing it down as short as I dared (1").  This time, I even raked the lawn roughly and collected dried crumbled grass clippings to cover the bare areas after seeding.

After seeding the lawn again, I sprinkled the dried grass clippings over the bare spots.  Not thickly, just enough to give a little cover and hide them from the birds...  Then I spent an hour gradually watering the seeds enough to let then soak up some moisture and start germinating. 

I saved about a lb of grass seed for patching spots that don't grow this time.  Its a blend of 3 Rebel tall fescue.  I like fescue, but it isn't a spreading grass, so bare spots develop.  I think I will get some bluegrass for the sunnier areas next time.  It spreads.  But the lawn is at least half shaded, so I need fescue on most of it. 

Sorry no pictures again, but for some odd reason, I can't upload pictures on THIS blog.  Works fine on the cat blog, and as far as I can tell, the settings are the same.  I don't have any maximum picture upload issues, as all of mine are in the "free" range.  And pictures that won't upload here WILL upload to the cat blog.  It's driving me nuts.  I posted a question on the Blogger Help Forum days ago, but have not gotten any responses.  Any ideas are more than welcome!

Poor Old Storm Drain

Tropical Storm Lee finally did it in.  I'm used to it getting covered with fallen branches and washed-down debris, but this time the washed-down stuff actually broke the storm drain apart.    It is a brick shell covered by a heavy metal grate that sits on the bricks.

Not any more... 

The back of the brick structure is batterred loose and at an angle.  the top is covered with tree debris I can't pull apart.  It is so tightly interwoven that stones piled up on the top.

I would show the pictures of the broken storm drain, but blogger isn't letting me upload any pictures on this blog..  I getting a bit pissed about that.   Not only that, but all of a sudden, I have to sign in to each of my 2 blogs every time with full username and password.  Two days ago, I could select them from a drop-down list or use a bookmark.

9-11-2011

On 9-11-2001, I was quietly doing my regular job.  An odd news announcement caught my ear at 9 a.m.  A plane had crashed into the World Trade Center.  Strange accident, but one hit the empire State Building many decades before in heavy fog.  But I mentioned it to a supervisor (his office included FEMA responses for our agency).

Then there was a 2nd.

Later, I felt a "thump" through my feet.  A few moments afterwards, I learned the Pentagon had been struck by "something".  I worked a couple miles away from the Pentagon, and 2 blocks from the White House.  It was a really bad day after that.  We all watched the terrible events.  I won't go into that further.

When I got home, I bought and set out a flag from my back deck vowing to leave it there until the perpetrators were caught and punished for such a horrific act.  I have decided to leave it up (4th one actually, they do wear out).

In past years, I have said many things about the events.  This time, I think it best to display a couple of images.  I searched 1,000s of pictures.  Most I found were far too graphic, or xenographic, or bloody, or boastful.

I hope these 2 wordless graphics will strike the right balance on this 10th year commemoration of 9/11...

Earthquake and Storms

[Sorry no pictures today.  Blogger has been rejecting pictures on THIS blog, but not my other.  Can't figure out why.  I'm not exceeding any limits.]

Well it sure has been an interesting few weeks.  First an earthquake on Aug 23rd, then Hurricane Irene Aug 27th/28th, and then Tropical Storm Lee Sept 5th-9th!

It was the 1st earthquake I ever felt, and while it was nothing like West Coast earthquakes, it was certainly more of a surprise.  My first thought was "It CAN'T be an earthquake, they don't happen here!", but after a few seconds, it was obvious it wasn't a tree falling on the house.  And then we had to wait to see if there would be aftershocks.

Hurricanes aren't terribly common here.  They tend to either make landfall south and approach over land, weakening rapidly, or pass by further off the coast.  But we do get serious ones occasionally.  I remember Hurricane Agnes in 1972.  It came right up the Chesapeake Bay and sank the family boat (a complete loss).  Then there was Hurricane Floyd in 1999.  That one dropped so much rain so fast that my street was flooded, half my front yard was flooded, and I stayed up all night wet-vacuuming water from the basement.  It is the only time I've ever seen the 2 storm drains next to my yard actually completely covered with standing water!

So then we had Irene.  Fortunately, the ground was very dry and basically absorbed all the rainfall and there wasn't even standing water afterwards on my low front lawn.  Still, 7" fell here, and it was the strongest wind I have experienced in my 25 years at this location.

Tropical Storm Lee was actually worse.  First, it came over Maryland and just sat there for 4 days raining almost constantly!  Not as hard as Irene, but for over twice as long.  Second, the rain bands were heading directly north the last 2 days.  The strongest ones kept going directly through my county.  It was depressing, as if the rain bands were following the highway through town!  I had to empty my good rain gauge twice!  The total for Lee here was 10.5"!  The airport 15 miles west only got 5.5" and to the east they got only 7".  That made 17.5" of rain in 13 days...  Third, the ground was completely saturated from Irene, so the rainfall had nowhere to go but across the surface seeking low spots.

One of those low spots was my patio!  The entire yard slopes gradually from the far back to the street front.  Part of the patio has cinder block walls to hold the slope.  The non-cinder block entrance is at ground level.  The patio was never built properly.  The house builder didn't properly slope it slightly toward the lawn to prevent water collecting there.  And over the years, the lawn has risen slightly, enough so that prolonged rain can lap against the sliding glass basement doors and seep in.  I have occasionally had a slight problem with that.

Well, after the 3rd day of rain, it finally started seeping in again.  I tried the wet-vac, but it was too prolonged a rain to stop seeping in.  I finally had to go out in the pouring rain at Midnight and dig a 6" deep and wide ditch 10' to a more downslope spot at the fence gate.  Happily, the water collected in the patio started rushing out!  I was relieved.  In only 10 minutes, the collected rainfall was a foot away from the doors and I knew I wouldn't have any further problems in the basement.

It finally stopped raining very early this morning...

One odd note about the storm.  The County came by just before Hurricane Irene and cleaned the collected debris of several years from the primary storm drain.  It worked fine for Irene.  But Lee covered it back up again.  That shows how much more forceful rainfall drainage there was from Lee.  And not only tree debris; there are golfball size stones covering the woven tree debris covering the storm drain!  AND, it appears that the brick storm drain has been broken by the force of the debris and stones.  The back bricks appear all loose and tilted, and the metal grate at an angle.  I will have to call the County about that.  I'm sure they will be thrilled!

Can I please have a break from earthquakes and hurricanes for a while?  Please?

Hurricane Irene

Well, it's been an interesting week.  First an earthquake, then a hurricane!  Hurricanes aren't too rare here, but this was the most direct hit I've experienced as an adult (and the eye was still 80 miles east).  But it was clear there was going to be major rain and wind.

So I was prepared the evening before.  Aside from the usual emergency supplies (flashlights, crank radio, batteries, water, food, etc), I made sure to have a good supply of comfort foods...

Before I went to bed that evening, I noticed my 5" rain gauge was at 4.75", so I went out and emptied it.  I took a quick look around the yard for any tree damage and found none.  But the most intense part of the storm hadn't arrived yet.  The lights dimmed a couple of times, but I never lost power.  I'm very glad all the electric and cable lines are underground here!

This morning I found another 2.5" of rain in the gauge, for a total of 7.25".

There was some tree damage, but nothing serious.  I haven't driven out yet, but I did hear a chain saw in the neighborhood, so someone had some larger damage.

I found some medium branches fallen.

And a few smaller ones, but those were from my favorite saucer magnolia tree.

I have some repair work to do in that tree!  There are a couple of breaks like this.

Two of my tomato cages blew over in spite of being staked.  One stake was bent over at ground level, the other was simply pushed over in the soaked garden soil.  I was able to raise the cages without any apparent damage to the plants.  I put 2 stakes on each cage for better protection.

So I came through the hurricane in good shape. 

Earthquake

Well, I have experienced my first earthquake.  It was quite interesting.  My first thought was that one of the 2 huge trees near the house was falling on it an breaking through the attic in stages.  But I realized immediately that the shaking was too frequent and sudden.  So I guess it was about 5 seconds before I knew it had to be an earthquake.

It was odd; the house felt like it was being pounded rather than shaken.  There was no vertical movement sensation.  I think I was being moved back and forth laterally about 6 inches.  I kept on my feet, but after a few more seconds it became visually disorienting because the house and I were not moving in the same way.  So I had to put a hand on the kitchen counter.

It felt as though it lasted about 15 seconds, but everyone on TV later agreed it was about 25 seconds.  The center was about 90 miles away, in central VA, 5.8 magnitude.  Apparently there was one major aftershock and several minor ones in the following hour, but I did not feel any of those here. 

The range of detectable shaking was very large; from Atlanta GA to Ontario, to Ohio (as best I've heard).  It was so widespread because the US east coast is old solid ground; few faults to absorb movement.

  I went outside immediately when the shaking stopped, mainly in case one of those trees DID decide to fall.  It was another minute before the first neighbor came out.  It was hilarious.  The first 3 neighbors to come out all asked "Did you feel that?".  DUH!  I assured them that everyone for many miles around had surely felt it.  I said, "for all we know at the moment, New York is in ruins or the New Madrid fault opened up again" (none of my neighbors had heard of New Madrid).

I went back inside to look for any damage and check CNN for details and likelihood of aftershocks.  All the cats were STILL poofed up after 10 minutes and now, 3 hours later are demanding more attention than usual (making it hard to type).  The only consequences were some fishtank water had sloshed out (no fish), a framed photograph had shaken off a bookshelf, and one tippy samurai figurine had fallen over (undamaged).

It was interesting, but I won't mind if it doesn't happen again...

Free Mulch Again!

For years, the County collected lawn and tree debris, shredded it, and aged it.  Then gave it back to county residents for free.  On Saturdays, they would even load it in trailers or pickups for free.  It wasn't big pieces like commercial mulch, nor aged enough to be compost.  I used to get 2 trailer loads each Spring.  One to use for mulch and the other to set aside to compost further.

Then they stopped for 2 (3?) years.  I kept checking their website only to see "No Mulch Available".  I figured they were either using it for county maintenance, or lacked the funds to keep processing the raw debris.

So when I had a landfill load of trash, I asked about it.  I was told the mulch had become available again all this year.  I would swear the website said "No Mulch Available" just last month.  But the imporatant thing was that the mulch was available again!

There used to be hour-long lines to get the Saturday free loading, but yesterday, I was the only customer.  I drove up, put a tarp on the bottom of the trailer (it has gaps between the floorboards) and set the edge of a larger tarp in the front so the mulch would hold it in place.  ONE big bucket load later, the trailer was filled to overflowing!  I folded the top tarp back over the pile and attached it down with bungee cords.

I drove it into the back yard, where I will scoop it out onto this beat up old tarp where the last of the compost mulch was used up this Spring.  Unfortunately, the top tarp did not reach all the way to the back end, and with 3" of rain falling on it, the exposed mulch got so heavy it tipped the trailer back.

Now there is too much weight against the removable back  upright, I can't remove it.  So I'll have to shovel a foot or so clear before I can slide the mulch out.

This is how tipped it is.  I removed the top tarp, in hopes that the rain forecast for tonight will even out the weight and let it sit level again so that I can remove the back.

I shot this picture crooked so that it would LOOK level.  LOL!  That's 2.75 cubic yards of free mulch!  I hate to think what it would cost to buy it by the bag!

As soon as I get this unloaded and spread around the flower/garden beds, I'll go back and get more to leave aside to compost, then whatever more I can get, I'll use to cover my daffodil and hosta beds!

Strange Rain

I had the oddest experience today.  Something that hasn't happened to me since I was about 11.  Those many years ago, we kids were playing outside and realized that it was raining in our yard, but NOT across the street!

Well, it finally happened again!  I was watching the rain suddenly pouring down in the front yard, so I went to the back to watch the rain gauge fill up.  Nothing!  It WASN"T raining in the back yard.  Not a drop.

Convinced I was just not seeing it, I went out on the deck.  Dry!  I even went out in the yard because sometimes the trees absorb a lot of rain at first.  Nothing!  It was several minutes before rain finally started falling in the back.

Talk about being on the edge of a cloud!!!  Has this ever happened to you?

Forced Shopping

This is NOT an advertisement for Walmart, though it may seem like one.  It's just that I had a massive shopping trip (for a reason).

For a week, there has been utility digging in the neighborhood.  A large sign said the electricity would be off Aug 1 from 8 am to 1 pm.  So I planned for it.  I had left my car for a battery problem at the dealership last week and the Walmart is right across the street.  I spent the scheduled service hour wandering through the store and found a number of things I could use, plus some things I didn't know Walmart carried (they have expanded their food area).  I didn't want to buy anything then because I would have had to haul it all back to the car dealership.

But I planned yesterday carefully.  The power was to go off at 8 am (and the temperature was forecast for the upper 90s). And I know that scheduled outages get extended sometimes.  So I got up at 6 am and cranked the A/C down to 65, showered, got dressed, made breakfast.  I took the car out of the garage (electric door).  At 7:45, I checked the computer, shut it down, and turned off the backup battery, and unplugged the emergency outage lights.

The power went off at 8:15.  As planned, I went outside to do some garden weeding and random yardwork in the "cool" of the morning (it was already 85).  I came inside at 10 am and the house temp was up to 70 already and no air circulation.  So I went on my planned shopping expedition.

First, to places that sold stuff Walmart doesn't (or has but is junk).  I started at the Home Depot (Big Box DIY store).  I have had several burst hoses lately (they are all getting old) so I wanted commercial-grade, and I needed a couple good new hose sprayers too.  Plus I am trying to design a stand for attaching a nozzle to so that I don't have to stand around holding a nozzle all day when I water the gardens.  I needed to just see what basic stuff I might use.

Got to the Home Depot and found 2 nice hose nozzles.  Damn, I forgot to pace off the lengths of hoses I wanted to replace.  I'll have to get those later.  And I forgot to get 2 more quick-connect male connections.  Later on those too.  Any shopping list is guaranteed to be incomplete.

From there, I went to PetsMart.  Petco has the higher-quality stuff, but where they both have the same product, PetsMart is cheaper.  I wanted a 3rd cat carrier (3 cats - 3 carriers) and a collar for Iza (she lost another one).  I found a nice new red collar for Iza (this one is even reflective).  It was hard deciding on a new carrier (trying to judge the size from memory of the other ones at home).  I already have a small one (fine for Ayla at 7 pounds) and a larger one (fine for Iza at 12 pounds).  But I decided that Marley is probably going to get near 16 pounds at the rate he is growing, so I got an even larger one.  AND it has a TOP opening door!  It has a front one too.  I never saw that before!  I decided to pass on the customized pad at $12; I have lots of old towels.

To my surprise, PetsMart is now carrying Eukanuba kibble.  I hadn't seen it there before.  Cheaper than Petco by $3!  Grabbed a bag.  I have some already, but it will last.

So then it was on to Walmart.  Some of their own brand stuff is well-rated by Consumer Reports magazine, and I go there for those anyway.  But when they sell the same brand name product at 75% of the regular price as other places, I'd be a fool not to shop there.

I bought/guesstimate savings:

Kleenex 3 packs/25%
Tidy-Cat litter/40%
Toilet paper/30%
A single outstanding car mat/(not found elsewhere)
Low sodium V8 juice/33%
Tea (regular and decaffinated)/50%
Narrow spatula (sharp-edged and heat resistant/it was only 88 cents!
A pill splitter (for vitamins and cat pills)10%
Sodas/10%
Spices/20%
Nestle's Quick (no sugar added)/20%
Candy (I have a weakness for Hershey Hugs and Dove Raspberry Dark Chocolate)/20%
A hand-held fertilizer dispenser (for where the yard-type one can't go)/not found elsewhere
Pajama shorts/ impulse purchase
Thick work socks (my gardening shoes are just a little large)/just seemed a good deal

Picture of the loot...

And the new cat carrier.  I hope whoever thought of putting a door ON THE TOP got a HUGE bonus for that idea!

Oh, about that car mat...  I have had this flimsy car mat from the previous car and it keeps sagging and folding under the pedals.  I have to straighten it out every time I drive.  I was going to rubber-cement it to a piece of old chairmat to stiffen it.  Partly because auto places only sell mats in 4-packs (2 front, 2 back) for about $30.  This single one is all I need, it is thick and ribbed  and it cost about $5!


Usually, I just go to Walmart for a few specific things.  I'm usually there for the kitty litter (they sell the 35# bucket for less than the pet stores sell the 27# bucket) and the V8 juice.  But when they sell brand name stuff at half-price, I gotta shop there...

I'll give an interesting example of how bulk changes prices.  When I moved here 25 years ago, one of the first things I bought from a local hardware store was a benchtop table saw.  3 months later, the first Big Box DIY store opened and they had the exact model for half the price and it wasn't even "on sale".  Just their regular price.  I felt robbed!

Another thing...  I had been looking on the net for a wall "clock" that gave date/day/time digitally in big letters.  Couldn't find one.  Walmart had one.  And it gives the outside temperature, indoor temperature and indoor humidity.  AND keeps the clock accurate by radio signal.  For $20!

Another thing...  I had been wanting a "touch-on" bedside lamp for years.  I found one at Home Depot for $40.  It broke in months.  They didn't sell it anymore.  Walmart had one, one time.  Two per box actually.  For $20.  Working fine after several years.

But anyway, it was a great day shopping.  It's not something I do often, so it was great fun!  But it worked out perfectly.  When I got home, the power was back on, and one clock I have counts the time from power-on.  It was only 15 minutes.  I pretty much timed it perfectly.