Matching Paint, 2

So I went to Lowe's because Home Depot said they had the same (Duron Aztec Rouge) paint color in Valspar.  Well, of course Lowe's had no idea what I was talking about.  According to their computer, they had no such color.

It was maddening!

But I had info with me...  And all I wanted was a color card.  Lowe's sells Valspar paint.  I had the closest Valspar color name with me.  They couldn't find it!  Not the color sample card or even the color.  And Valspar had it on their website.  But Lowe's couldn't find it in any of their colr sample cards.

I showed the paint guy  the formula for the paint, but he didn't understand it, which was frustrating.  Paint color is defined in 3 numbers.  Hue, Saturation, and Lightness.  All paint companies understand that.  That is HOW they define their colors.  If *I* worked in paints, I would make sure to understand that.

My original color was Hue, Saturation, and Lightness 4, 46, 84.  I found that Valspar "Hearts Afire" was only one number different.  But they couldn't even find that in their own line of paint.

But I also had a Pittsburgh paint name of the litterally same color with me.  One number different in a different category.  Lowe's could find THAT!  They mixed a quart of paint for me.

I probably don't even care much if there is a slight color mismatch.  Its a black-out bedroom and the color hasn't faded much after 25 year but maybe some.  Better a close match than bare plaster patch, right?

But this experience of color matching is really reinforced my conviction that even the "experts" in retail sales haven't the slightest idea of what they are really doing.  They just learn "the system" and are good little employees.

Matching Paint

I have an odd color in my bedroom.  It doesn't bother me because I'm usually in the dark there.  And it is 25 years old.  The paint can is long gone.

But a few years ago, I had some electrical work dome and ended up plasterig some holes.  I sanded them down just fine, but I didn't have any paint left.

So there the patches sit mocking me in the whiteness of the plaster...  I mock back by turning out the lights... 

But there comes a time to fix all things and I decided to prime and paint the plaster patches.  I assumed that, because I knew the name of the paint, a match would be easy to get.  Silly me!  I looked up the color name "Aztec Rouge" and went to the DIY store to get a match.  And they had no idea what I was talking about.

They have some really cool equipment there.  They can match any piece of color I bring in.  But they only match colors by formulas in their books.  If I gave them a pice of my wall, they could match the color because their machine tells them to take a white base and add an ounce of this and 3.5 ounces of that.  Voila!  Which IS pretty impressive. 

But I didn't have a piece of wall to give them.  What I DID have was the exact hue, saturation and lightness numbers (which define a color).  Because I found that no-longer-existing paint color on the internet.  The exact numbers are 4, 46, 84 if you understand that stuff.  I do because a former art-major girlfriend didn't and I learned enough to help her pass her "you make it" color-wheel chart (and she probably doesn't understand it to this day, but I hope she has a great life).

So I cave the hue, saturation and lightness numbers to the DIY paint department, and they had no idea what to do with them.  In fact, they said the numbers meant nothing.

And I was sure they were defining the color.  But when several professional paint clerks say they mean nothing, there isn't much to discuss.  So I went home and did some research.

Don't be shocked that I was right.  I'm used to it.  At a paint color-matching site, I found my exact color, and changing the numbers changed the color slightly,  so the numbers did mean something; the paint clerks just didn't understand them. 

The old paint no longer exists.  But I found one with only one number different by "1".  I doubt I could tell the difference, and the paint I found is slightly paler than the original and that should match the old paint better anyway.  But the the nearest store that sells it is 20 miles away.

That should be my worst problem, LOL!  At least I solved it. At least now I can get them to match it.  In Pittsburgh paints, the color is called 'Cranapple' and their book tells them how to make THAT! 

Lawn and Flower Stuff

I mentioned previously deciding to overseed my lawn and improve it a bit.  That involved aerating the lawn and mowing the grass short, then raking all the clippings up for removal, roughing up the bare soil so seeds would have better contact, and planning to broadcast good quality fescue seed (shade and sun blend since my lawn varies in sunlight) before a few days of forecast sunny days.

Unfortunately, the sun never showed up (always a few days in the future).  Well, I think it managed to rain nearly every day this month (and not much from Hurricane Florence).  I have always been told to seed in dry weather so the seeds fall through the existing grass and reach the ground, and because the seeds might rot in wet weather.

But I was running out of the right temperatures, so I checked on the internet.  To my surprise, some sites (apparently not connected to sellers) actually recommended overseeding in mild rainy periods.  They said that wild grass naturally germinates in mild rainy times and it avoids having to water the lawn 2x a day.

Well, as I said, it is getting cooler, and germination rates go down (and emergence slows down) when it is cooler.

And forgive me, they said what I wanted to hear, LOL!  That's not something I usually pay attention to, but I'm running out of time.  The forecast is for drizzly weather for the next week at least (never pay attention to weather forecasts more than 5 days out).

So, today was dry.  I mowed the lawn short again, re-roughed the bare spots, and spread my grass seed according to the spreader setting recommended by the seed company.  And ran out of seed halfway!

So off to the DIY big-box stores I went.  Walmart was only selling little bags at high prices.  I went to Home Depot looking for big bags of separate Sun and Shade varieties of fescue.  Some bags didn't specify of were seed and fertilizer combos.  Earlier this month, they might have had each, but I finally found a good sun/shade blend.  Naturally, that was the only grass seed without a price label!

I found a clerk and he searched the racks for the pricing label for about 5 minutes without success.  Finally he pulled out a digital gadget and scanned the barcode and got the price in 10 seconds.

What IS it with some people?  He knew he had the scanner.  Does he hate customers and enjoys passive/aggressive punishment of them?  Did he resent me disturbing his rest against the shelves?  Does he hate digital gadgets?

But the price was "OK" and off I went.

I was also looking for a lot of pansies to plant for Fall color.  They only had single plants in individual 2" pots for $3 each.  I wanted about 50.  But not for $150!  But they did have a really unusual Mum that caught my eye.

Most mums are fluffy-flowered and red, orange, or yellow.  This one had vivid red petals with a bright yellow center.  It was called "Red Daisy".  It was only available in a 2 gallon pot for $11.  I usually buy smaller plants, as they grow well for me and I'm patient.  I just looked it up.  It gets BIG!  3' tall and 5' wide.  The label didn't mention that.  But it lives about 10 years and I bet dividing it every few years helps it live longer.  Well, I was planning to re-arrange the flowerbed anyway (many old plants dying off - even most "perennials" aren't "forever") and this will nearly force some changes.  I am planning to go with larger individual flowers interspersed with annuals.


So I went to the Lowe's next to them for Pansies.  They had the same $3 pots,  BUT they also had 12-cel packs in same color per pack for $10.  I bought 2 packs of yellow, and 1 each of purple, blue, and bronze.  And 2 of the blooming pansies in one purple pack are nearly BLACK!  I've never seen that before.  Those will go in a special pot on the deck.

I got the new grass seed spread after I returned home.  Now I just have to wait to see what grows in the rain.  The bare spots will be proof of success or failure.  If grass seed doesn't germinate and grow well in a week of drizzle, well, at least I tried!

Almost Delivered

The DR brand self-propelled brush mower arrived at the nearest delivery depot they use today.  Its a Fedex depot.  I chose that because DR ships stuff freight and the options were (since a freight truck can't back up into my driveway and get out in my dead end residential street):  I offload a 250 pound crate from the truck (yeah, right) at no charge or the truckers uses the tailgate to lower the crate to ground level and pushes it off (on the street) for $99.  I considered that, as the mower is probably mostly assembled and it would mean I mostly had to break the crate apart (we are not talking cardboard boxes here).

For no charge, I could have it delivered to a depot and pick it up or arrange redelivery into my garage.  Well, it was a Fedex depot, and they deliver stuff in trucks that can manage residential driveways.  And I could pick it up for free if I drove there and they would load it on my hauling trailer.

So I called Fedex about residential delivery.  I should have called them before I ordered the brush mower.  The depot is out of my delivery area.  They can have it redelivered by a contract company though.

But the Fedex person asked a question I did not expect.  "Do you have permission from the shipper to have a 3rd party pick it up and deliver it to you"?  I had to admit I did not specifically have such permission.  So they are emailing the shipper to receive that permission.

When you get a question you did not expect, it can be hard to think of follow-up questions on the spot.  So I said, yes please email the shipper.

Afterwards, it occurred to me I should have asked why permission was needed.  After all, the shipper had completed the delivery (to the Fedex depot).  Why would they be involved in any further movement of the crate? 

In my working career, I was very good at asking follow-up questions to surprises like that.  These days, not so much.  It might be age, experience with the subject matter at work, less frequency of experiencing surprise questions these days, etc.

But anyway, now I'm waiting for a company to give me permission to have a 3rd party pick up my crate at a depot and deliver it into the garage.  I expect they will grant such permission as a routine matter.

I could drive 40 miles to the Fedex depot and pick it up at any time.  But towing a heavy crate on a 5'x8' trailer is not the safest thing in the world.  And I really hate driving long distances.  40 miles with a trailer is "long" to me.

Everything will get resolved successfully eventually.  I can't WAIT to cut down that 1/8th acre of blackberries, plant some specimen trees and get that part of my back yard back!

Movies

I'm not a great movie-watcher.  Mostly sci-fi.  But I've watched some good movies.  One was 'True Grit'  (some movies are just unique) and today I found a remake offerred from 2010 free TV.  I had some doubts.  The Texas Ranger seemed sexist.  I mean, when I first switched to the movie, he seemed a bit "stalkish".  So I went elsewhere, but I went back.  I mostly never like remakes.  And I hardly ever remember names.

So, the girl character was right, Rooster Cogburn was right, the Texas Ranger was mostly right (Glenn Campbell seemed more honorable in the original) but got better as the movie went along.

The bad guys were good as actors (and bad guys are seldom good actors). 

In fact what impressed me was that all the characters were as good or better than the originals.  I think even the bad guys did a good job of being bad.   If there was an award for "best remake", I would suggest the 2010 version of 'True Grit'.

Watch it if you get the chance...

Odds and Ends

1.  I had to dispatch another groundhog a few days ago.  I've gotten in the habit of finding their burrows, stuffing the carcass into the opening, and covering the opening with the dirt from around the burrow.  Well, this last one made a weird entrance that was just under soil level.  I covered the carass and tamped down the soil.  I do that because I figure new varmints MUST sometimes intersect old burrows and the existence of a dead groundhog ought to discourage the new ones.

I noticed some movement around the burrow the next day, and realized there were 3 vultures standing on my toolshed!  I went out (and they flew away) and discovered just a slight exposure of the groundhog from pecking at the soil. 

I've seen nature shows that state that vultures find dead food only by sight.  They are wrong.  The burrow was not visible at all due to thick overhanging overgrowth.  They can smell as well as see.  After I covered the carcass with 4" more dirt, they came back the next day.  So then I covered it with heavy boards.  They haven't been back.

2.  I lost power today.  No storm, no lightning, it just went off for an hour.  That was a surprise.  The bigger surprise was that my computer went off.  I have a backup battery for it, but it didn't activate.  I did some chores by dim daylight (cleaned litterboxes, collected trash, prepared veggies and chicken for dinner, and listened to a battery backed-up radio.  I have buried electrical cables here, so outages are rare.  Which means I forget how much I depend on electricity.

I had to laugh at myself when I tried to open the garage door (electric opener), walked into rooms and flipped light switches, etc.  I've read that leaving too many electrical things on after a power failure can throw circuit breakers when the power returns from sudden demand, so I went around and turned off everything I could expect for a couple lights to let me know when the power returned.

3.  It has been raining for so long that my tomatoes and beans are dying.  I picked all the ripe tomatoes and most are cracked open from all the water and fungal diseases are rampant.  Fortunately, I have 3 tomato plants that are under the rainshadow of the overhanging roof.  I means that in dry times, I have to water them more, but in rain, they do better.  And they are all looking healthy and loaded with fruits.

4.  The mosquitos are breeding like crazy.  The ground is so wet, the larvae are surviving in places one would never expect.  Even when I drain planting pot saucers carefully each day, there is enough moisture left (and new rain) to keep them alive.  I even found some growing in a slight depression in a tree branch (I drilled a hole through the depression on advice from a garden site).

5.  The constant rain is depressing.  I stepped out on the deck yesterday just as the sun broke through briefly (must have been the one hole in the clouds for hundreds of square miles) and got a bit silly.  I pretended I was burned by the strange light in the sky.  As if I was Gollum tied with an Elven rope).  But seriously, everytime it isn't actually raining, I let the Mews out so they don't go stir-crazy.  They have been stuck inside so much for weeks, I'm cleaning the litterboxes 2 and even 3 times a day.  Which tells me how much of their "business" they do outside...

6.  I may have gotten the mower running again, but it isn't a happy engine.  I mentioned fishing some debris out of the gas tank.  It makes funny noises when it does start, so I suspect some debris has been sucked into the fuel tube.  I've looked, but the fuel line is cleverly hidden from DIYers like me.  I can't even figure out how to get at it.  I've lived here 30 years.  The first mower lasted 10 years.  This one is 20 years old.  It might be a good time to just buy a new one.  New ones cut better and more levelly and use less gas.  I might buy a "zero-turn mower".  And maybe I just want a new one.

7.  Speaking of "new ones", my Toyota Highlander is 13 years old.  Things are starting to go wrong.  It only has 28,500 miles on it (I don't drive much).  But age matters too.  Last year, I brought it in for regular maintenance.  They did the work, but suggested I replace the timing belt, all engine belts, and the waterpump.  IIRC, they suggested a cost of about $1,000.

I declined at the time, but they planted a seed of concern in my mind.  Now I worry about the timing belt breaking.  That means the car just STOPS and there isn't anything you can do about it.  You can only have it towed somewhere to have a lot of work done.

Well, I've been thinking it was time to replace the car.  I've been hoping to wait for a decent electric vehicle that could tow a small utility trailer (or even a fuel cell vehicle), but I don't think I can wait much longer.  

Because I called the dealer and asked about the cost of the timing belt and the other work.  Over $2,300!  I'll call a non-dealer repair shop and get an estimate, but it probably won't be much different.

Which leaves me in a slight dilemma.  I don't want a new car with all sorts of internet connections built in (privacy concerns plus I just wouldn't use them - but tell me why I might want them) and I don't like to buy used cars (someone traded it in for a reason). 

I am considering a new Toyota Highlander (for familiarity) or a Subaru Forester.  Both have top Consumer Reports ratings and I am used to SUVs.  Since I drive so little, gas mileage isn't a concern.  I also have some idea of buying a renovated car from my younger days plus a small electric-only vehicle for local errands. 

Oddly enough, a renovated Pontiac Bonneville Convertible or Eagle Vision (my 2 favorite cars I've owned) and a small electric wouldn't cost much more than a new Highlander (and there is a shop in town that specializes in services old cars). 

8.  I mentioned the house is 30 years old.  It needs work.  I redid the roof and siding a few years ago, but the inside is OLD.  30 year old cheap carpeting is literally something to sneeze at.  I'm almost afraid to vacuum it lest it just falls apart.  I'm fine with most of the house.  I don't need any walls removed, kitchen renovations, etc.  But my furniture is like that of a college grad in his first apartment with old hand-me-down mismatched stuff from the parents and leftovers from previous roommates.  I have windows that can't be opened, and plaster-patches left over from electric work 3 years ago.  It is bwyond DIY work for me.  I need to change all that and get a general contractor in here. 

9.  Time for a new Will, too.  What I arranged in the 90s doesn't match what I need today.  Different family needs, different charities, and my assets have changed too (the stock market I poured savings into in 2009 has been very very good to me). 

10.  The house is a mess.  I used to clean weekly before Dad moved here in 2012, I cleaned more often when he was here (to avoid listening to his beloved Fox News), but I've been lax since he left.  There may be some cobwebs in the tall corner of the staircase from his time here.  I need to spend some time catching up. 

11.  I have 2 toolsheds.  I built one 25 years ago.  The other was built by a professional 10 years ago.  Mine leaks.  If it ever stops raining before Winter, I will replace it.  Properly, this time.

Enough for now.

Bad Lawn Overseeding Advice

So, to make sure I didn't forget anything since the last time I overseeded my lawn, I went to the internet.  OMG, what nonsense I found.

WikiHow seemed like a good place to start.  What they said at first matched what I remembered.  But then it got weird.

They had 2 sections; overseeding an existing lawn and seeding a new lawn.  I ONLY looked at the overseeding part.  They said to cut the grass short (right), and dethatch if necessary (right) and rough up bare spots (right).

But then they said to till the soil 1-2" deep and rake the debris away.  Whoa!  Why cut the grass and then till it away?  That is for new lawns.  They messed up their instructions.

So I looked at another site about lawn care.  They said to overseed your fescue lawn in early September (here) when the high temperature is 55-70F.  OOPS!  The temp isn't 55-70 until mid October at best (here).  And fescue germinates best at 75-85F.  Another fail!

Where do these sites get their information?  Do they just ask some random stranger?  Do they just make it up?

I'm going to visit WikiHow and see if there is a way I can correct their disinformation.

Meanwhile, my plans to overseed the lawn are at a standstill.  Not because of bad internet advice, but because of weather.  I thought I had things planned well.  The soil was wet, but there was a 4 day forecast of non-rain.  The first morning, I would aerate the lawn and mow the existing grass short, rake a few bare spots caused by my trailer to help the seed settle in, and spread the seed.

As mentioned previously, I got half the yard aerated and mowed when the mower ran out of gas.  It was afternoon the next day before I got it running again and finished the job just in time for a surprise rainstorm (and it rained the next day too).  You can't spread seed in wet grass.  It sticks to the exiting grass blades (now reaching the soil), and rain makes the seeds rot.

Well, I could wait a few days for it to dry out.  No such luck.  It kept drizzling off and on for several more days.  Then there were thunderstorms for a couple days.  And now there is Hurricane Florence coming.  Heavy rain will loosen rooting grass and kill it, and unrooted seeds will wash into ripples across the lawn downslope. 

So I've been forced to wait.  The good news is that Hurricane Florence is predicted to take a more westerly course when it makes landfall in 3 days.  And then it should move east again as it weakens.  So maybe now more rain for a while after the weekend.  Then I can do the preparation all over again and finally spread the grass seed. 

We have had an bizarre number of rainy days this summer, and some weeks have had a lot of volume of rain as well.  My 6" capacity rain gauge has been filled a couple times, and 2" every couple days is routine. 

This is really unusual.  A decade ago, it was routine to have the soil in my lawn crack open from dryness in August and the grass go brown and dormant until late September.  Today, I pushed a 12" screwdriver into the soil easily right to the handle.

Weather variations are maddening!

9-11

Never forgive, never forget. 

I remember the images of people leaping to certain death to escape the flames.  The swan dive of one woman.  Another women pushing her hands against a building wall as she fell to avoid having her skin ripped off by contact.  I remember the buildings falling in seeming slow motion.

I remember seeing the 2nd one start to fall and my co-workers thinking at first that it was a news repeat of the 1st and me shouting that it was the 2nd too.

I remember the "thud" under my feet when the plane hit the Pentagon.

I remember everyone crowding the street with their cars to get away and thinking the last place I wanted to be was in a traffic jam like a sitting duck.

I remember standing on the roof of the building, a block away from the White House, watching the skies for the 4th plane.  And relieved to hear the passengers had attacked and overpowered the hijackers over Pennsylvannia.  And then so sad to learn they had all died forcing the plane out of control of the hijackers to save others.

I will not forget this event just as my parents did not ever forget Pearl Harbor.  I will not forgive this event just as others will never forgive WWII atrocities. 

And I expect that history will reveal that some of our Middle East "allies" knew about this.

Another Day In The Life, Part 2.

So it was Friday.  The mower still wasn't starting.  But the battery was turning over the drive shaft like crazy.  It should have started.  I mean, all that happened was that it was running fine, ran out of gas and I refilled it.

I'm not a gas engine mechanic.  I know the theory better than the reality.  But theory helps.  I can do some simple things.  So after trying to start it again, I went for the basics.  I removed the air filter and beat the dust out of it.  I checked the oil (fine).  I checked the throttle to make sure it was working (it was).  I looked at the manual to see the things that would prevent the engine from starting (blade engaged, brake not on, no gas, spark plug wires firmly attached, etc).  None of those.  Mower just wouldn't start. 

I tried a trick I learned from a mechanic about spraying some carburator cleaner into the carburator and then trying to start the engine.  I saw some drops of gas spitting out of the top of the carburator.  No go.

It was hot and humid and I was getting pissed.  I went inside and made lunch and drank a lot of water.

Later I went back out and asked the mower why it wasn't starting.  I pulled the spark plugs.  They were fine.  Very clean.  No deposits or oil.  The gap looked right.  Put them back in.  I decided the carburator just wasn't getting gas. 

So I took off the gas cap and looked inside.  There was a BUNCH OF DEBRIS ON THE BOTTOM!  HUH?

So I figured I had to get that stuff out.  As far as I could tell, you can't remove the gas tank with out removing the engine and I sure wasn't going to do THAT!  Far beyond my skills.  I was about to try crushing an aquarium net to "fish" around in there to collect the debris, but I remembered a weird little "grabber" gadget I had for retrieving lost screws around engines and under tool benches. 

I grabbed onto the largest piece and pulled it out carefully.  It was a piece of gasket!  I looked at the gas cap and saw it matched a stud to hold the piece.  OMG!  The gas cap gasket broke and fell into the gas tank after I filled it the day before.

I took several more pieces out.  And, to my surprise, some of them were bits of leaves!  I can't figure out how THEY got in there.  Long story short, I removed a dozen bits of junk out of the gas tank. 

So the mower started right up after that, right?  Wrong!  But I'll say one thing for Walmart batteries; they keep chugging.  I got weird sounds, hisses, and a slight thunk.  And all of a sudden, it started.  I was not expecting that. 

And you better believe I drove it all around the yard for an hour mowing the last parts of the lawn short and recharging my brave little battery!  I even got all the grass clippings piled into two 3'wide rows.

That was so I could rake them into piles and cart them to my compost bins.  You can't lay down grass seed on clippings because the emerging roots need soil contact.  I collected 3 trash barrels full of grass clippings. 

Success sometimes comes hard.  A bit of knowledge, a bit of "just trying stuff", a bit of looking for the odd problem, and a bit of luck makes a difference.

Now all I have to is rough up the bare spots with a rake and spread the grass seed all over the lawn.  I have fescue grass here.  It clumps rather than spreads, so it needs to be reseed every few years to stay looking full.  But it is a vigorous grass.  Bluegrass would look nicer, but it gets too hot here and I don't get enough sunlight for it.  I spread a sun/shade mix of tall turf fescue when I renovate.

And I read up on the procedures each time I overseed, just to make sure I don't forget good hints.  Apparently, my experience is better than many internet sites, because you wouldn't believe some of the nonsense I read this week!

And THAT is tommorow's post...

Another Day In The Life, Part 1

So, I decided to renovate the lawn.  That means cutting the grass down to 1",  aerating the lawn, collecting all the grass-clippings so that new seed can reach the ground and get some sunlight, and watering the lawn slightly 2x a day to keep the seeds moist.

I thought I had the timing perfect.  Aerate the lawn with my core aerator (pulls 3"x1/4" plugs of soil out of the ground and deposits them on the surface.  That allows air and water and fertilizer to get deep into the soil, and reduces compaction.

And since I was going to be dragging the aerator across the lawn with the riding mower, I would mow the grass short in a pattern that threw the grass clippings into just a couple of 4" wide rows.

Then I would rake the grass up and save it for the compost pile.  Then spread the grass seed.  The weather forecast was for occasional rain for the next week.  Perfect for the seeds to germinate in 80 degree temps.

Well, that was the PLAN...

The aerator has a tray on the top for putting heavy stuff on the top to make the aerator tubes sink deeply. 

I bought solid cinder blocks for it years ago.  And I added more weight this time (the ground was a bit dry).

No plan works...  As soon as I started (1 pm Wednesday), I discovered the aerator tires were flat and one was tire was off the wheel.  I had to take all the heavy stuff off and raise the end of the aerator off the ground supported by bricks.  Taking off the tire was awkward.  There was one bolt on the outside and 2 on the inside.  Only the farthest inside bolt held by a wrench allowed the outside bolt to be loosened.  With the wheel off, I had to reinflate the tire.

Of COURSE it didn't have a tube inside.  That would have been too easy.  I had to get the tire re-seated onto the metal wheel in order to get any air to stay in it.  I know from past experience that pressure on the outside of the tire can get the tire re-seated onto the wheel.  I spent an hour struggling to do that, to no avail.  Well, I worked at a tire company briefly, and I remembered they had an air-pressurized tube that went around small tires to press the tire to the wheel.  I don't have one of those.  I was dripping with sweat and worn out, so I stopped for an hour.  Drank 3 glasses of water.

When I was cooled down, I tried to think of ways to squeeze the tire onto the wheel.  I have an air pump to add a lot of air through the valve all at once.  With that attached to the valve, I tried twisting a rope around it, and I tried turning a loop of rope with a crowbar.  That didn't work.  I tried putting the tire in my bench vise and using some wood clamps across the tire in 3 directions.  That didn't work.

Damn!  I finally thought of ratcheting straps (like you use to hold a boat to a trailer.  That was awkward.  12' of strap around a 8" tire takes a lot of winding.  And the straps I had only get to 6' short (from 12').  I finally managed to hook the end of the strap at a point where the ratchet would really tighten.

It didn't work.  Well, not the 1st time or the 2nd or the 3rd or 4th.    But eventually, by pounding the sides of the tire with a rubber mallet, the seal finally caught suddenly!  YAY, HOORAY, and HALALULEAH!!!  It caught suddenly and filled...  I couldn't find anything on the tire that said what PSI to fill it, but I went for 12 as that seemed tight but with a slight "give".

So I brought it back outside and put the wheel back on the axle.  Being a sensible type, I also  checked the other tire.  It was at "0" but the bead to the wheel had not broken.  So I dragged the air pump outside and filled it to 12 psi too.

By that time it was 5 pm.  I decided to stop for the day and make dinner.

Thursday, I went all around the yard, aerating and mowing at the same time (very slowly so the aerator tubes could sink into the soil).  Just before I was done, the mower ran out of gas.  Well, I had more gas in the can, so I refilled it.  And then the mower wouldn't start again! 

OK, I guess I put a lot of stress on the riding mower hauling the aerator around with all that weight on it.  But why the mower wouldn't start was confusing.  I'm barely competent with gas engines.  I thought maybe I flooded the carburator.  I decided to stop for the day and I covered the mower with a tarp due to the possibility of rain.

And the next day is tomorrow's post...