Bleh!

I KNEW it wouldn't be easy gettig a laptop to just connect to the wireless router,.  The laptop asks questions I can't answer.  Verizon said it would just ask for a "SSID and a "WEP KEY".  Yeah, ROTFLMAO!  Worse, it offers options I don't understand.  Even WORSE. I think it is offerring me connections to all the neighborss' wi-fi  (and one is either very innocent or downright dirty).  I don't want to know that stuff.

But I can't get the laptop  working and I used up the battery earlier, so it is charging again (and I'll leave it connected).  I'll call Apple after it is charged.  I think I know the right details for Verizon.  Its the laptop questions I need help with. 

This is why I didn't do this before.  Any two pieces of computer equipment do NOT want to talk to each other...  And I'll mention again  MY BAD LUCK on minor things like this...

Need to do live chat with Apple and that typing kills me.  I bet they tell me to talk to Verizon.  That  makes me the bouncing ball between the two of them...

ARGH!

UPDATE!  With the hour-long struggle with the Verizon tech help (as opposed to the USELESS TWO hours of non-help from Apple)  we have achieved LAPTOPNESS!  I have to say that no matter what the problem and whether it was actually a Verizon issue or not they have helped me through thick and thin.  And yes it is 11:30 AM here and I've been up ALL NIGHT again, struggling with computer challenges , but it was worth it (as it usually is when successful)!

And I have to say my $200 cheapo refurbished MacPro 13" laptop is acting SUPERBIO-PRIMO!

The next comments you get are going to be laptomese and I think The Mews will love it too!

A New Piece Of Equipment

Well, having a desktop computer being my single piece of high tech equipment since my first Commodore computer in 1983, I have LEAPED into the 21st century!

I now have a cheap refurbished 13" screen Mac Laptop.  Its cosmetic condition is way better than promised by the seller (on Amazon.com).  It's sole intended purpose is to visit my (and the Mews) blogging friends.  I figure we can visit our friends on a more regular and timely basis if we have a laptop out in the main part of the house.

I talked to my ISP and confirmed that my existing router should accept a signal from the laptop, and I have the information they SAY is sufficient to connect.  It is charging now, and I will see what happens tomorrow.

According to the seller, I have 30 days to decide if I like it, but I should know on the first day.  It was cheap enough to give it a try without much concern.  Security is no concern, as it won't actually have any information on it.  I mean, it has a good basic set of software, but I won't be keeping any files on it.  If I understand correctly, just reading blogs and not even email won't leave anything to be read except my blog-visiting history, and I can't see what good that would do anyone (though I will add firewalls and such anyway if they aren't already on there).

I do think I want to download a manual for it (wasn't included) to see what I can do with it (or should not do with it for security reasons).  It's portable of course, but I don't plan to use it that way.  I just wanted a remote station to read blogs and possibly browse during TV commercials.  It won't have connectivity to my desktop computer (I will check on that because I don't currently WANT it to).  Mostly, I need to start with one feature and see how that works. 

It seems a reasonable good deal for $200.  The keyboard isn't full size, but it is close.  And I bought a cheap wireless mouse  to go with it.  I typed on it a bit before I started to charge it up and I'll have to be a bit careful.  But its not like I would have to use  it for extensive typing.

And who knows, maybe  this will get me into more of a wireless world.  Which is a bit ironic, because from 1988 to 2006, I was the Telecommunications Manager at a Federal Agency overseeing policy and operations for all the landline and wireless voice services, yet never used any of the wireless stuff myself.

Looking forward to the powered-up laptop access tomorrow!

Football

Thank you, The Washington football team, for being so embarrassed by the lowly Tampa Bay Bucanneers.  Now I don't have to even THINK about watching the homie team for the rest of the year...

Fun With Lumber

Or I could title this "I have bad luck on minor things"!  I went out and bought the lumber I needed for the remaining 2 framed garden beds a few days ago.  Back at home, I decided to back the trailer up to the garage so I wouldn't have to carry the heavy preservative-treated wood from the far corner of the front yard where I store the trailer.

I'm sure anyone who has some experience in backing things up with a car knows that the longer the hitched item is, the easier it is to back up because the directions don't change as quickly as with short items.  Well, my trailer is only 8' long, and I couldn't even see it in the rear view mirror, or by opening the front car door and looking out.  I finally had to go in the garage and clamp a board upright in both rear corners of the trailer.  I think I will attach a couple of small flags on dowels attached to the trailer corners!

But I got the twelve 8'x2"x8" boards unloaded into the garage and the trailer put off into the yard corner.  Today, I set about cutting them to size.  The preservative lumber is odd.  They are not a full 2" thick or 8" wide, but thy ARE longer than 8'!  Perhaps that is so the poorly-cut ends can be recut better.

Anyway, I needed most of the boards cut to 7' long, so it didn't really matter.  Except the few end boards which I wanted to cut into two 4' long boards.  Still, the extra length made that not a problem.  I carefully measured each board's length before I made any cuts, and they were all 8'1" long.  Perfect.

Except one board.  Which I failed to measure.  Which was one of the few boards I chose for the two 4' pieces...  So I got a 4' board and a 3'10" board, which just won't make a rectangular framed bed!

Think about it.  For 8 of the boards, it didn't matter (they were getting cut to 7').  For 3 of the remaining 4 boards, I measured (and they were all at 8'1").  The ONE board I didn't remember to measure NEEDED to be 8'1" so that I could square the ends with good smooth cuts.

So the ONE short board had a 1/3 chance of being among the 4 boards that HAD to be over 8' long AND a 1/12 chance of being the only board I didn't measure.  Giving a 1/36 chance THAT board was the only one I didn't measure AND was too short.  Which means that, with 36 sets of identical boards, I would have NOT had a problem 35 times and a problem only once...  And I managed to achieve that "1 in 36 times event".

I have the worst luck with minor things!!!

So now I have to go back to buy 1 board.  Grumble, grumble, grumble...

Random Successes

1.  Got the 4th of 6 framed beds completed.  Next job is to fill them halfway with existing soil from where the 5th and 6th of 6 beds will go.  Today is about the last decent day to work outside for a while, so I better take advantage of it.

2.  Accumulating more stuff in the basement to have Salvation Army pick up.  It sometimes seems everywhere I look there is more stuff I really don't need.  Some of it is so odd I am labeling it. 

3.  The new trash pickup service is great!  The fact that they provide company-labeled trash bins is a great improvement.  With the labeled bin, they don't forget me if I only have enough trash to tput out once a month.  If they see their bin, they empty it.

4.  The strong winds this month have been a benefit.  Usually, the basket oak trees hold on to the leaves until January.  But they are almost all fallen now.   I can mow over them several passes with the riding mower until they are all mulched into the lawn.  What falls from the trees seeps into the yard to feed the trees.  And the grass.

5.  Getting ready to have the tub tiles replaced.  After 28 years, they are coming loose around the faucet.  I should have been aware that there was a problem, but some things happen so grdually, you don't notice.

6.  And as long as I have some tile work done in the bathroom, I might as well fulfill a minor design fantasy.  I always loved Rachel Ray's green tiled kitchen.  I think I will duplicate that.  I do love green.

















7.  Dug up 4 Basil plants before the freezes hit.  Will keep them in the south-facing window so I can pick some leaves all Winter,  I hope.

8.  Have 3 planter-boxes of Meslun, Leaf lettuce, and Head lettuce.  Hoping for routine salad improvements all Winter.

Veterans Day

I am not a veteran.  I came of that age during the Vietnam War and I was against that war.  In my 2nd year of college, the draft lottery started.  I gave up my college deferment and took my chance.

My number was something like 254.  They didn't reach that number and I was free of the draft after that.

I will not say that upset me.  I thought the war was dumb.  But I did not think less of those who did serve.  Had my number been called, I would have served (reluctantly).

My father was rejected for service in WWII for heart reasons.  I had many uncles who did serve and valiantly.  Most of them thought the Vietnam war was idiotic.

I sometimes wonder how differently my life would have gone had my Vietnam number been called.  I wouldn't have been a great soldier.  I abhor militaristic hierarchy.  But I would have done my best.  I would probably have been killed, because I do have a sense of getting out in front of situations.  But my number wasn't called and I am here today.  Some people I knew in college surely aren't.

Everyone has a view of how to live and what to die for.  I didn't choose to risk mine in Vietnam.  But I have no doubt that I would risk it to push someone out of the path of a speeding truck or in stopping a fight.  Its all where you decide you would risk death.

I thank those who decide to risk theirs and serve in war.  To each their own...

Energy Use After New Insulation and Other Stuff

1.  Energy Usage After New Insulation:

One month does not prove anything much, but my first post-insulation project usage for October shows that my Oct 2013 usage was 1326 "some unit" and the Oct 2014 usage was only 973.  It is promising, but weather in one month can be different one year to the next.  I'll wait to see the next few bills.

But it does look good.

2.  The framed raised garden beds are progressing.  3 of 6 completed and the boards for the 4th are all cut.  Now that I have the process of building them routinely, the 4th will be easier than the first.  And I am set to buy the lumber for the 5th and( last) 6th  any day the weather is "OK".

3.  I'm continuing to accumulate a pile of donatable items in the basement.  Its not the "usual stuff".  Today I cleaned out the top shelf of the pantry.  Anyone have  a bamboo multi-layer chinese steamer?  I do, and I haven't used it in 20 years.  Onto the pile it goes.  I hope the Salvation Army knows what it is.  LOL!  I keep holding off calling Salvation Army for a pickup because I keep finding new stuff to add to the pile.  I wonder what they will do with a 4" lens refraction telescope, for example.  But that's their problem/good luck.

4.  I'm loving the new trash pickup!  I got rid of 12 bags of kitty litter last Friday and 10 today.  They say they don't accept "lumber", but I have a barrelful of scrap ends, and so far as I can tell watching them mechanically lift and dump the dedicated container they provided, they can't see what is in it.  I can keep cutting the trash lumber into 6" pieces and put them in bags all month until is is all gone.  It sure will be nice to not have to drive to the landfill this winter!  And I have a lot more junk to get rid of.  I'll fit it it into the dedicated Evergreen container even if I need a sledgehammer to break it up.  And I'm not trashing any recyclable or compostable stuff.

5.  Last night was the first hard freeze here.  I dug up 4 Basil plants to try to keep them growing inside on the south window.  Picked the last tomatoes too.  A few were at orange, so they might ripen.  For the others, I will look up "fried green tomatoes".

6.  Got out my 3 window box planters tonight.  I can get some fancy mesclun lettuce from them over the winter,  I have just enough potting soil left from last Spring to fill them.

7.  The lowering sun this time of year is now blasting my eyes through the kitchen window.  I found a tension rod to fit across the window and a valance to hang just low enough to prevent the glare as I make my lunch.  28 years and I'm finally getting around to doing that!  I had a choice of 2 valances.  One white lacey and one red.  I chose the red; white lace isn't quite my style.  Red doesn't fit the white wall and black appliance colors, but who cares.  The cats won't complain.  I've been considering having the kitchen tiled in various shades of 4" green and painting the rest of the kitchen celery.  Maybe I'll hang a little label on the red valance "annoying red dissonance".  LOL! 

Actually, I like red/green/black as a color scheme.  My living room is hunter green, the TV room (traditionally the dining room) is dark red, and all the other stuff is black except for the medium wood furniture.  Oh well, I never expected to be displayed in "House Beautiful".  I like what I like.

8.  Next indoor project is to arrange the planting area.  Everything since Spring has just been piled into the grow-light shelves.  Since growing season starts indoors here in 2 months, I better get started on that soon.  Or I'll need to do it fast the day I want to start planting.

Blogblast For Peace, Elections

Can't help it, I just love this one...

And...

 -------------------------------

I can't forget US election day, though.  I won't try to suggest who to vote for anywhere.   But things have been improving since the Great Recession of the middle 2000s, we are out of 2 unilateral wars, and back into building alliances (as difficult and slow as that can be). 

Mostly, though, I just want to say:  VOTE!

Since my first vote in 1972, I have only missed voting in one Presidential or Mid-Term or Primary election.  I skipped the presidential election in 1980 because I couldn't stand either Jimmy Carter OR Ronald Reagan and supported John Anderson.  And with the long lines and the hopelessness of his chances, I just stayed home.  I regret that.

Voting is precious.  If you don't vote, don't complain about the results...

So VOTE!

Waterbed Management

I sleep on a King Size waterbed.  Lots of room for me and the Mews.  And Marley slept the entire night under the blankets at my side last night.


Did you know that water escapes a big thick plastic waterbed mattress?  Yeah, me neither!  It happens very slowly, and I suppose few people have a waterbed undisturbed for 28 years.  I'm guessing some random breakdown of water into hydrogen and oxygen (there was a big air bubble in the mattress), some very gradual escape (even plastic/rubber isn't 100% impermeable forever,and "something else" (its always wise to cover all possibilities, LOL!).  But over 20 yeras, the water in the waterbed had lessened,

SO...  I hauled a garden hose into the house.  I kept the connector to the waterbed all these years (I've had this waterbed mattress for 38 years - talk about a good deal).  Well, the waterbed frame has drawers below it, so it just sat patiently in there waiting to be used again after the 28 years since I moved here.

The hose in through the bathroom window...

The window...

Outside the window...

Hose from the stand...

Looped over the holder...

Inside.  The blue thing screws onto the waterbed fill at the long end.  There is a black hose valve so I can start the waterflow from inside the house...

And finally, towels around the waterbed fill connection.  There is always some leakage as it is detached.

So I connected the garden hose to the waterbed mattress connector and turned it on full blast.  For . 10. Minutes.

That's a lot of water.  The mattress is twice as thick as it was before.  Now you have to understand that the incoming water is cold.  I hope the Very Small Heater can warm it up enough by the time I go to bed.  A cold waterbed mattress can suck the warmth right out of you even through several blankets.

But oh is it going to be nice tonight!  It had gotten to the point where, when I turned over, my knees hit the support frame below the mattress.  That sure won't happen for ANOTHER 20 years, LOL!  And honestly, in another 20 years I doubt I'll notice.  Or I'll have to do it again!


Update,  it warmed up nicely.  I slept like a good baby and I haven't done that for a while.

Garden Enclosure Again

Got back to work on the framed beds.  Bought twelve 2"x8"x8' pressure-treated boards yesterday morning and cut up half of them in the afternoon.  Half because I bought boards for 2 beds and decided to do them one at a time.

First, I discovered why the first set of boards I bought a few weeks ago for the first 2 beds were hard to get squared in construction.  I had the store staff cut them on their huge fancy saw.  Silly me!  I assumed the boards were the lengths the labels said (like 8' long).  The length didnt matter for the long sides of the beds, but it did for the widths because I simply said "ct them in half". 

"Half" isn't a measurement...

Only after constructing the first 2 beds did I realize that all the boards were not equal.  Not exactly a functional disaster for a garden bed, but it vaguely offended me.  I should have been forewarned by the very surly male store person who was talking to the female cashiers when I made him do some work.

So this time I simply took all the boards home to cut myself.  It was a revelation!  The boards varied in length from barely 8' to 8' 1"!!!  End the ends were NOT square by as much as 1/4" over the widt.  No WONDER I had had so much trouble getting the first set to match up square!

I have a radial saw to cut long boards to length easily.  I have a good table saw too, but you can't slide an 8' board on it.  Radial saws work best for that.  So first, I measured a board and found it was long and not square at the end.

I have it next to an 8' workbench at the same level height, so I can handle 10' long boards.  The radial saw is great for long boards because the saw moves, not the long boards.  I bought it when I built the fence because I had to cut about 1500 long boards (yes 1500) for that project.  It paid for itself just for that and I've probably cut almost as many more since then.

But back to the odd lengths and unsquareness of the boards...  I first shaved 1/4" off one end of each, then stacked them to the side.  When all were done, I clamped down a board at 8' from the saw blade (as a positive "stop"" and cut them to exact length.  Perfect length and all square ends!

Two of the 8' boards were WAY heavier than the others (I could barely lift them), so I kept them aside to cut into the smaller widths for the bed ends of 3'.  Like the longer boards, I shaved off the ends to get them squared.

Nothing ever works out as planned.  I set up another positive stop (meaning a clamped board away from the saw blade an exact repeatable distance).  And clamped the board against the saw fence so that there could be NO errors.

There was an error on the very first one.  I screamed in frustration!!!  How could it have been wrong?  Oops, the edges of preservative treated lumber are not "perfectly" straight along the long edges.  I had chosen the straightest ones I could find, but flat straight ones vary along their length.  So, as I kept adjusting the clamping to get them as straight as possible, the board slipped away 1/4 inch from the positive stop...

You can't win sometimes!  So this bed isn't 8' long; it is 7' 11 and 3/4" long.  *sigh*  It why I don't try to build furniture.  I'm cursed with minor errors.  OK, in the garden framed beds, it doesn't really matter much.  But it still ticks me off!

So, this early afternoon, I went out to construct the 3rd bed.  I have the digging routine down pat.  The yard is sloped, so I have to dig a trench for each bed to make it level.  I set the lower end of the long boards on a brick and raise it until it is level.  Then I dig down the upper end by that much.  It works.  Then I level the end board and clamp the long boards to it.

Making the end board fit even with the long boards, I drive in three 3" screws on each side, then raise the other narrow end up onto a board to keep them even.  Drive three 3" screws into each side there.  Then remove the support boards and settle the completed frame into the shallow trench.

If it isn't level, I lift the frame and push dirt under it until it is level.  Not usually required, but I did have to once.  Then I make sure the frame is really square.  You do that by measuring both opposite corners.  When I tap them a bit so the opposite dimensions are the same, I know it is really square.

It started to rain slightly after I got the first layer of frame for the 3rd frame in place this afternoon, so I had to stop and put all the tools away.  But at least that was done.  Putting the 2nd layer of boards on the top of the 1st level is always easy.  You just match the tops to the bottoms.

I cut a scrap board into two 2' pieces to space the beds apart for walkable/wheelbarrowable paths.  The upper left is the bottom of newer box...

But the rain stopped.  I didn't want to haul all the tools out of the shed in case the rain started again, but I did have time to haul all the boards for the 4th bed out of the trailer and into the garage.  At least I know how to do the cutting better than the first time, LOL!

That will be tomorrow's start.