Interesting Day, Part 2

So after the "energy inspector" left yesterday, I had other things to do.

First, there was yet one more form to get notarized about Dad's death.  Dad had 4 investment accounts and life insurance (and 2 days retirement pay), which all required some forms (several of which needed bank manager legal signatures and stamps).  So I had all but the last one signed, copied and filed.  The last was just a Notary stamp, and I had the envelope all filled out (just needing the one last page stamped).

I got that, went straight to the post Office (they were all oversize envelopes of 6-10 pages, so I couldn't just stick an extra stamp on them).  OK, that's all done. 

I'm conflicted.  I don't need the money (I've been fortunate to have done well enough myself).  But I'm grateful to Dad for having accumulated it over his life and I appreciate my portion of his life's savings.  And he knew from our financial discussions over the years that I was doing well. 

So I'm going to increase my giving to charitable organization that I think help the world best.  I'm not naming specific ones, but world hunger, world medical treatments, and the general environment are high on my list.  And there will be a local cat no kill-shelter (Southern Maryland suggestions are invited).

After getting home, I planted leeks among the corn.  There's enough sunlight around the base of the corn for the leeks to thrive.  It was nice to get some dirt under my fingernails!  I have the corns planted about 8" apart in bins (its an experiment), but I figure the small space the leeks require won't bother the corn.  SCORE!

And then I wanted to get my garden mailbox re-installed.  I use 2 mailboxes in the yard to store small tools.  One is in the garden itself (for hand tools).  The other is at the deck for hose nozzles and attachments.  This one was the latter.  The old attachment had been poorly constructed and a bit off level.  I fixed that today, and attached it to the center post of the new deck absolutely level. SCORE!

They I decided to hang the niger thistle-seed finch-feeder from the center of the deck.  But there were 3 deck posts and only 2 long hangers.  So I need a third.  But I did have the 2 to install, so I did that.  And in honor of the new deck, I did it RIGHT!

I set one about balanced sideways on the post and clamped it loosely.  I have this neat tool that gives an analog dial red at any angle.  Old but accurate.  I clamped the hanger in about the center and level position, then measured it side to side.  I attached a screw at the bottom, then adjusted the position of the hanger to be level and clamped it tight.  Set in another screw at the top (pilot hole for accuracy and all that ease of screwing).  Perfect.  Now I just have to plant some appropriate flowers in the baskets to be hung. 

After THAT, I dug up weeds around the tomatoes and the bell peppers I planted.  They are all doing well.

By tht time, it was getting near dark out.  I called the cats in.  They get kibbles as treats when the come in when called.  Dinner was a smoked half steak sliced thin with carmelized onion, red bell pepper, green bell pepper, and crimini mushrooms (cheaper lately than regular white mushrooms), bean beans, tossed salad, and M/V potato.

Games

This was actually 3 days ago, but I have some posts scheduled and its just too confusing to go back and change the tenses of those.  So I'm writing this today in the present tense, but you are reading this a few days from now.  With that out of the way...

I play games of all sorts.  Board games, not people games.  And Dad taught me that there was no point in playing a game if you didn't try to win ("there's a reason you keep score", he said).  As the eldest child, Dad taught me a lot of card and board games.  He gave me no slack.  It was win or lose.  I respected that.  And it made me a good gameplayer.  I AM competitive.  Generally, I play to win. 

If you detect some guilt coming in here, you're right.

I was 20 by the time my youngest sister, Jennifer (deceased 2010 and sorely missed) started playing games herself.  I always won, but I showed her HOW I won, so she could learn (and she did) (which was more than I got from Dad).  You can ignore the father/son dynamics there...

And I still love to play games against people who are (or think they are) my equals (and a darn lot are better).  Otherwise you would be seeing me in chess or poker tournaments.

But, you know, lately I just don't care about winning so much.  Sometimes just playing is good enough, though I do try to win.  It's just that I'm not obsessive about it anymore.  Losing a game doesn't destroy my day.

So there I was at Pogo.com joining some games randomly (after staying up all night at them) and one game was doomed for me from the start because it was late in the game.  So the game ended and we started a new one.  Just 2 human players and 3 computer robots (who play quite well, BTW).  The routine is to kill of the Bots first, and the other guy agreed.  Something like this.


But then he turned the game over to his son (somewhere older than 12 and younger than 20 I would guess).  He was playing for a badge.  I know about the badges, but I don't pay any attention to earning them.  They just show up in my "space" sometimes. 

But this kid really wanted some particular badge and I was standing in his way.  He even attacked me before we killed the Bots. 

I felt for that kid.  I TRIED to lose.  Well, I didn't play suicidally, but I gave him every opportunity to win.  He got a winning position from his Dad.  And to be fair, I'm really good at comebacks.  Bit I really did try to let him win.  He didn't...  He even thanked me for the game.

So I feel like I failed by winning.

I didn't get a chance to explain to him how he lost (the games ends and all the players are gone).  If he learned anything from our game, I'll never know.

So my question.  Should I have tried harder to lose, or should I have tried harder to win faster?

I personally thrived in merciless competition, but some people don't.  So what do you think?

Interesting Day, Part 1

Some days are better than others, and today was a nice day.  Both productively and weather-wise.  But I'm talking about a sales visit today.

I got a cold call on home improvements yesterday, and I "never" respond to those.  But this one I did.  They offerred a free "energy inspection" (my verbal reply was "oh sure").  But they claimed to be operating under a program sponsored by my electrical company, the initial inspection was free as in "really free", and IF I decided to go with a full "energy audit" with real equipment tests, the cost was only $100 (because the other $300 of their costs are paid by the utility in hopes of reducing energy usage.

OK, I scheduled the initial visit for today.  Some people have trouble getting out of paying slowly increasing costs once a company "gets their foot in the door".  I'm not one of those people.  I love free inspections.  If a problem is found, then I go find a really professional company to do it again and if necessary, I get 3 bids to fix the problem.

So an energy inspector came by today.  She spent an hour poking around the basement and attic, asked me questions about known drafts and warm/cold rooms throughout the house.  Then she explained that (surprise, surprise), there were enough possible improvements to recommend a "negative air pressure test" and the various ways they could fix the energy leaks (depending on where the $100 audit found leaks.  Fortunately, I have some former professional experience with heating and ventilation practices, and the $100 cost (for me) was very reasonable. 

So I have the air pressure test scheduled for next week.  The air pressure test is familiar to me.  They open the front door, seal it with a powerful fan pulling air out of the house, and have air pressure gauges inside and out to see how much air gets pulled from outside into the house through air leaks.

So, after she left, I did some internet research to check the company, the methods, and the likely savings outcomes.  Angieslist gave them a high customer rating, the methods seem to be "good industry practice", and if my electrical supplier is subsidizing the work that seems like a decent recommendation too. 

And the electrical supplier subsidy is substantial.  They pay $300 of the total $400 cost for the detailed energy audit.  More importantly, they pay 50% of the first $4,000 dollars of actual work later.  I wouldn't even have to request reimbursement, I just wouldn't pay their 50% to begin with. 

I should explain that my house is 100% electric, that I get routine charts with my electric bill showing that my energy usage is above average for my type of house locally (3x average in Winter), and that I have been considering having some "fixes" anyway for a year.  That increased Winter spike started when I had a new heat pump installed 3 years ago, and it has been bothering me a lot recently.

I (naturally) didn't mention to the energy inspector that I will bid any serious work to 2 other highly-rated companies once I get the fixed work quote.

Aside from all that, I had an interesting time discussing the potential future "fixes" with the inspector.  I was not surprised that some of the improvements involved additional insulation in the attic (who argue against more insulation?).  I was a bit surprised that they propose to remove all the rolled/batted attic insulation, caulk around all the attic joists/drywall, and replace it with "blown-in" insulation to "R-49" (R-16" is standard code around here).  I'll check about that tomorrow.

But what surprised me?  She didn't know how insulation actually works! I didn't pursue the question, but it was informative.

So anyway, after researching the "good industry practices" (and keeping in mind the my energy supplier is willing to pay 50% of the first $2,000), I'm willing to go to the $100 equipment test (which involves about 2 hours of 2 person's work.  The company is not making any money off that!  I'll know more about things when I see their fixed quote with detailed work described.

The Old Boat

Is gone! 

Well, one of the deck demolition guys saw my old jon boat sitting in the backyard full of leaves and asked if I ever used it.  Well, I haven't for 5 years.  So he made an offer, I made a counter offer, he made a 3rd, and I didn't care about the difference so we agreed on a price.  He got a good deal, but the boat wasn't doing me any good either just sitting around.

So he paid me half as a down-payment and I wrote out a receipt.  He came by Sunday with the remaining amount.  He's never had a boat before and is retiring this year.  Wanted a cheap boat to go fishing in.  I sold it "as is" which may get him in trouble.  "As Is" was boat, trailer, and an electric motor.  Nothing beyond that.

Still, the next morning, I decided I couldn't let the guy drive away with leaves blowing out the back, so I cleaned them out (have I already mentioned all this?) and used the garden hose to blast it as clean as I could.

Good thing, because I found 2 wasp nests in the bait well and they would have been really p*&&ed by all that bouncing on the road home.  I killed them, but I did have to dodge the ones who returned to their absent nests later.

 So yeah, it was "as is", but I decided to improve the "as is".

I even made sure the boat was still waterproof by filling it up 6" deep in water and waiting a day to see if there were any leaks.  There weren't.  Draining the boat was impressive, and the shrub behind it appreciated the deep watering..

It wasn't perfect when the guy returned, but he sure did appreciate the improvement.  But it allowed me to show him how some parts of the boat worked.  The bait well, for example has a drain below the water line.  But there is a pvc pipe that rises above that so outside water doesn't come in.  Onshore, you pull the pvc pipe and it drains.  That sort of non-obvious thing.

But it looked OK.

I hope he enjoys the boat.  I had it for 21 years, so I got my money's worth out of it and some cash back.  But it sure looks odd not seeing a boat in the yard...

Now I'm deciding which way to go on a new boat.  I DO plan to start fishing again.  I like stillwater freshwater fishing, so I might go for a squareback canoe (for attaching an electric motor).  But there are some slightly fancier boats for getting out on the calmer waters of the Potomac river.  I'll wait a while to decide.

Damnable But Small Problems

It's the smaller problems of life that get at you the worst sometimes.  I mean, Really Bad Problems, you know they are, and you have to deal with them.  Family members die, you break a bone, you lose a job.  Those are bad.  And everyone understands.

Its the smaller stuff that is sometimes harder to deal with, because you are all alone with it.  The splinter in your finger, the sore shoulder, the car that doesn't like to start, those don't get so much sympathy. 

I've been plagued with the latter recently.  I don't need much sympathy, but I DO want to gripe about them.  And its MY blog, so here goes (LOL)...

My left thumb is inept.  For years, I've had a spot I stuck with a thorn and it caused a tiny hard spot that just won't go away.  I keep noticing it with the index fingernail.  I've opened it a couple times with a sewing needle, but I can't get it to heal away.  And I cut the base of my right thumb years ago and it formed a hard spot there too.  I just keep noticing it when I grab things.  So when I got a half-inch splinter in That Left Thumb from the new deck I just got all freaked.  I couldn't get it out.  Turn the inside of your left thumb towards you and put the back down on a steady surface.  Now try to get at it with a needle and tweezers. 

Maybe I'm not as flexible as I used to be, but I just couldn't.  It took a week for the skin harden over the splinter like a callous, and I managed to loosen it after that.  Its healing fine.

But sometimes, it is just stuff like that over and over.  I damaged the left shoulder rotater cuff 10 years ago, and I thing I've done it again.  I don't even know specifically how or when I did it.  I just woke up one morning and OUCH!!!

My aging Mother used to say "getting old isn't for sissies".  Hmmm. I've been enough heavy work on my own for a long time and had a lot of "ouchies" (and enough "ARGGGHS" too), but they seem to be coming more often these days.  I hope I'm not becoming a "sissy".  But let's just say that I used up a tube of muscle rub ointment before the expiration date for the first time this year.

I wish that was the only problem.  I garden a lot and I get a lot of unwanted tree saplings that need to be dug out.  Usually, its not a problem.  Oh, work for sure, but I get them out.  Well, I was surprised this week. 

I am rebuilding my old rotting framed garden beds.  Aligned better to the sunlight, wider and higher, and to have a chicken wire enclosure to keep the varmints out.  Well, with the season moving on, I decided to redig the beds that will be outside the enclosure so that I could have some Summer plants growing (cukes, beans).  Meaning the old less-productive asparagus bed had to be dug up. 

There were 4 tree saplings I've been cutting back in there for several years.  So it was the right time to REALLY dig them out.  I couldn't.  I mean, I used the same techniques I always used before, but they just would yield!  I have tools.  A sharp all metal spade, an axe, a 5' pry bar.  I finally got one out and it about killed me...

Talk about realizing that you aren't 30 anymore...  I'd be happy to be 40 (I'm 64).  I did the sensible thing.  I left the other 3 in and planted around them.  Its just for a few months.  Come Fall, I will cover that bed with plywood and plastic and let them DIE next year.  All problems can be solved with time.

But I only mentioned all this to tell you about today's problem...

I have historically had basement water problems.  The old gutters filled with tree debris and would overflow onto the deck and then down to the sunken patio.  The patio had ground level drainage.  But over the years, the soil build up (fallen leaves, mowed grass) and formed a pool that build up to the level of the basement door.  Water got in.  I solved that temporarily by digging a ditch through the lawn downslope. 

In Fall 2012, I had the roof reshingled, new vinyl siding, and new larger gutters with debris-proof tops.  No more gutter overflow filling the basement patio!  Yeah.

Right...  With the new deck, there was a lot of digging involved.  Lots of soil moved around.  They did a good job moving the extra soil to a corner of the yard.  So far, so good.  What I didn't notice was that some of the extra soil got spread into the remnants of the patio drainage ditch.  So I had a 2" wall of dirt around the lawn connection to the patio.

It rained really hard today.  I was glad for the rain because it has been about 1/4" per week the past month.  BUT!  The rain that fell through the deck filled up the basement patio (I bet you saw that coming).  FORTUNATELY, I happened to go into the basement to get something and saw the rainwater seeping in.  I threw some old towels on it and went to the toolshed IN THE TORRENTIAL RAIN to get my grub-hoe.  Shovels work, but a grub-how makes a nice 4" wide and deep trench.  In the rain. 

Even with a raincoat on (and I wished I still owned a poncho) I was soaked to the skin just making a 4" wide and deep ditch from the patio downslope 12' long.  It was a pleasure seeing the water draining out in a rush...

But that is still a temporary fix.  I thought the bigger rain gutters would solve the problem, but with enough hard rain, even just the water falling through the deck will fill up the patio.

The real fix is to lower the level of the lawn where it meets the deck, AND installing a below-ground drainage system to move the patio water downslope.

More work.  Just what I needed.  And I'm sure not going to do THAT before my shoulder heals.  I'll just have to make sure the grub-hoe surface dug ditch stays clear for a while.

ARGGH!

And I won't even get into the new adult groundhog and rabbit I saw around the garden this afternoon.  Well, OK, I just did, but you know what I mean.

One Last Thing

About the new deck.  They had to rush by on Tuesday before the INSPECTOR arrived because they forgot to add a handrail on the stairs.  So I tried it out.

Got a BIG SPLINTER in my left thumb.  &%*#  Couldn't pull it out.  Touchy-painful.  But I was patient.  I got it loose today, 5 days later.  What a relief...

And 2 days ago, I managed to wrench my left shoulder.  I can't even figure out when I did it.  Put there it is, all useless in some positions.  Its a little better today.  But if I extend it across my body and then use it to push away...  OUCH!!!

I do that to myself too often.  I suppose there will come a day when I do something like that and it won't just heal.  But that's not THIS time.  LOL!  Comes from living alone and having to do some things it really takes 2 people to do, I guess. 

Grafted Tomatoes Report

Complete Failure!  The idea I had read about was to graft heirloom tomato tops to hardier disease-resistant hybrid bottoms.  You cut a top and a bottom at an angle and use a flexible silicon tube/clip to hold them together while they join.  You keep them in a humidity container for a week or so to keep the tops hydrated until they are getting water and nutrients from the roots.

After a week, more than half the grafted tops had died.  After 2 weeks, I removed some of the clips, but the seemingly-healthy tops just fell off.  I had 5 left.  After 3 weeks, I went to transplant them and THOSE tops fell off.

Well, I'm sure most of that was my fault.  It is commonly done commercially and by home gardeners.  I know I waited too long to do the initial grafts.  The instruction said to do it "when there were 4 leaves" (the seedlings would be about 4" high).  Mine were 8" high with 8 leaves.

So I had to use the clips "wrong".  Think of an "8" (with a fatter bottom) with a slit cut through the top.  The top makes the clip part.  Squeeze the fat bottom of the "8" and it opens the top and you attach the 2 angle-cut tomato parts together.

Well, the clip part was too small by then but the fat round part was the right size, so I tried just putting the round part down over the rooted stem and then placing the cut heirloom top down in that.  I got them matched in size very well, put it didn't work.

I assume the seedling halves were too old to grow together properly.  Or the uncut round part constricted growth. 

I'll try again next year following the "4 leaves" instruction more carefully.  There are pictures of the initial grafting process HERE.

Fortunately, I made sure to plant enough seeds so that I had regular ungrafted heirlooms to plant out.  They are growing well and I have at least a dozen fruits among the 6 plants so far.  But the disease problems usually start in August, so we'll see if I get many ripe tomatoes.

Well, Its Over!

The inspector came.  He didn't seem like a happy person, so I told the builder I was just going to stand around and keep my mouth shut and hope for the best.

That lasted about 2 minutes.  But only becaue the inspector saw my tomato plants ad asked about them.  Me red, him green after here.

Nice tomatoes.
Yeah they're heirlooms  and doing very well after setting them out late.
You grow heirlooms?  Which ones?
Oh, Brandywine, Cherokee Purple, Prudens Purple, Striped German, and Aunt Gertie's Gold.
My dad liked Cherokee Purples a lot.
Best tomato ever!
You grow peppers?
Well, bell peppers, Lipstick.  Grows red fast.
Like Ace, right?
Yeah, Ace replaced Lipstick a few years go, but I still like Lipstick better.  Hard to find though.
Yeah, I remember Lipstick.  Dad switched to Ace,  Nice use of the recycling bins BTW.  
Yeah, I'm trying some  bicolor corn and leeks and and Russian fingerling  potatoes this year.
Are they good?
Yeah, I tasted one  from the box.  Better than Yukon Gold.

Etc etc, for about 30 minutes ...  Needless to say we passed inspection.  He loved my garden (and the deck was pass-worthy anyway).

The builder was amazed.  Apparently this inspector is "picky", and never talks to people, but made no complaints about the deck.  For once.  Cheers for heirloom tomatoes!
     
And I can't wait for the first ripe one.

But most importantly, no more stranger/visitors for a long time.  The backyard is OURS again!  I let the cats out promptly...

Now, if you will forgive me, I'm going to go stand out on my deck for a while.  And go to bed early; I was up all last night!

Some Embarassment

Have you ever listened carefully to someone and thought you understood that they said and were wrong?  AND thought of the situation logically and were wrong?  That happened to me about the leftover materials from the new deck today.

Well, see, there were chunks of wood and leftover pieces from the deck, and the construction foreman said I could keep anything I could use because it was all just going to the landfill.  Cool!

But then later it occurred to me I should be able to because I had paid for all that material in the price of the deck.  It's not like they brought leftovers from their last job here for free.  There were 6' pieces of 6'x6' posts, pieces of 2'x12 boards, and lots of cutoffs from the composite deckboards.  Best of all, there were two 20' and one 8' lengths of composite deck boards!

I should mention that the deck itself is composite boards, but the rest is standard pressure-treated wood.  And when the builder discussed the upper posts and railings, my choices were narrow pointy vinyl with a narrow top or pressure-treated wood 6" wide.  I like flat top rails to lean on and set stuff down on.

After the construction, it occurred to me that topping the flat railtop pressure-treated (P-T) wood with composite board would be a nice finishing touch.  And the other boards were the right size to frame a sloped area behind the new posts for a row of hostas under the shade of the deck.  The remaining "chunks" were good for surrounding some shrubs and filling with mulch to keep down weeds.  Etc.

I spent a hot sweaty day outside Sunday moving the stuff I wanted to keep to the edge of the yard away from the pile of debris to be removed so that it was separate from the debris I didn't want. 

So, when I saw the contractor hauling some of the boards back toward the front yard, I asked him why.  He said he could return them to the lumber store for credit.  I said I was told by his foreman that "what was left was mine".  He said that only applied to the cut-up stuff.  Dang!  I felt embarrassed. like I was trying to steal stuff.  He said not to worry, it was a common mistake. 

But I really did want that compsite board to cap the rail tops, so I offerred to buy those two 20' long boards.  Saves him having to return them and me having to go get new ones.  I agreed to add them to the final deck cost.  The long composite boards with bullnose (rounded) fronts are not cheap - $70 each. 

But I've been thinking about this.  It seems to me that I paid for all the material the builder brought to the job.  And its not the cost (after $16,000, what's another $140), but a principle here. 

The contractor didn't arrive here with any free leftovers from the last job.  So everything he had delivered here, he bought within the price of the contract and expected to use building my deck.  So it seems to me that all the materials brought to the site are ones I was charged for in the job quote.

So, aren't they mine?  So, if I pay this guy returns unused materials to the lumber store for credit, shouldn't he reduce me cost by that much?  Or leave me those materials at no extra cost.

I plan to ask him more about that tomorrow.  I'm not going to be loud or demanding, but I do want to understand this matter of materials a bit better.  Partly for now, but partly for the next contractor (and there surely will be a "next contractor" about "something" here (planning kitchen tile work and a bathroom repair job).

OK, be honest, I can handle it.  Am I wrong to fuss about whether I've already paid for the slight leftover onsite materials?  I won't hold any comments against anyone, I need some reality-check.  I'm just trying to decide if this leftover stuff was already mine.

It's not like I'm complaining about the deck at all... I LOVE the new deck!

Thanks in advance,

Mark

New Deck, Part 4

First, A recognition of Independence Day.  I go out on the deck and read The Declaration Of Independence out loud each year on this day.  It is a stirring document.  Last night, I saw someone on a political talk show who said the claim is at the end and the justification is before, so read it backwards that way. I get the idea, statement at the end and justification before.

So I did.  I have to admit, I thought about it a little differently.

And to my/our British friends, I hope there are no hard feelings.  We got off to a rocky start, but I think it has worked out pretty well over the past couple centuries.  My revolutionist ancestors would not have tipped their hats to you, but I can and do.

But we DO have our holiday and I will support it with a steak on the Japanese hibachi grill, a cold Canadian beer (or 3), a few Southeast Asian shrimp, and a German sausage.  What could be more "American" than that?  LOL!

  ----------------
Now to the deck.  Finally, the end!  Well, sort of.  On Monday, some guys will be coming back to take away all the debris, fill the patio holes with more cement and apply a professionally smooth surface to match the existing patio as close as possible,  and smooth out all the remaining dug-up soil.  But the deck is essentially done.

First thing yesterday morning, they finished putting the composite board on the deck.  Then started putting on the rail support posts.   It looks great.  Now there is a real deck!

Then the tedious part, putting the rail tops on, then all the ballisters.  Of course, they had a sensible way of doing those.  They tacked the all tops with a nail gun and them let them hang freely, then they tacked the bottoms using a level to get them aligned properly.

THEN they put a screw in the top and bottom.  I would have done it the hard way, of course.  Each ballister one top screw and one bottom, one at a time. 

The ballister work progresses...  They did gripe about my "screws" contract requirements though.   They said nails were just fine and would have saved them almost 2 hours work.  But nails always come loose and I can't think of any screws that ever have!  They accepted that (and I might have gotten a couple minor construction points for it).

They did get them all done eventually.

I seem to have missed taking pictures of them building the stairway rails and attaching the ballisters on those.  That was a right piece of hard work by itself.  And took 2 hours worth.  Lots of angle cuts and awkward positions for screwing them in.

They got done just before the rain hit and I helped hual stuff to their trucks.

But here is the final deck!  From the deck door straight out...

A shot across the corner...

The landing leading to the stairs...

A look down the stairs...

And finally, a shot from the stair-landing to the opposite corner. 

I am thrilled!  There is SO much more usable space.  I can actually put a table out there, for example.

And to remind you of the difference, here is the "before" picture (admittedly after 25 years)...

And the "After".

 Quite a difference!

New Deck, Part 3

The deck is complete!  This is actually from yesterday, because there are too many pictures for a single post and I was just TOO DAMN TIRED to post yesterday.  So today's work will be in tomorrow's post.

The construction team was just 2 guys - JR and JT.   First order of work was to remove the old ledger board (holds the deck to the house foundation), cut away vinyl siding, and attach "flashing" to the house (keeps rain out).

Then a new bigger ledger board was attached.  I was surprised.  They used bolts closer than I did on the original deck and all my friends accuse me of "over-engineering"  everything I build.  Seriously, I always figure "if 2 screws are good, 3 are better".

What they did next, though, REALLY astonished me.  I build from the ground up.  Who doesn't?  Well, these guys don't, that's who!  They built the basic shape of the deck floor up in the air, supported at the corners of the ledger board and just 2 temporary boards.

I asked why (that's why I stayed outside for 2 whole days - to learn things).  They do it because it is easy to slightly adjust the deck floor box square when it is still flexible.  After the support posts are in cemtny, there's no changing things!

Forehead slap!  Of course.  And because we had talked a little carpentry, they asked if I knew how to make sure the box was square.  I said "sure, measure the diagonals".  I got a "high-five" (and a little casual respect) for that one!

But not even the professionals are perfect!  When they started to put the joists between the ledger board and the end cap, they were too tight.  I pointed out that the end cap was bowing out so their measurements were wrong.  They scratched their heads for a moment and had an "OOPS" moment.

See, the outside measurements of the deck box have to be 16' exactly.  So the senior guy (JR) had of course deducted the thickness of the end cap when he cut the joists to fit inside the box.  But forgot to deduct the thickness of the ledger board!  LOL!  Oh did he catch flak for THAT from JT.  And I got in a couple of friendly-kidding remarks later about that, which he took in good humour.

So after recutting all the joists anther 1.5" shorter, they were back in business.  Then I saaw a new surprise!  There are metal hangers to hold the joists to the ledger board and endcap.  Naturally, I would think you would attach the hangers to those and then set the joists down onto the hangers.  OF COURSE NOT!   They used a nail gun to hold the joists in place and then put the hangers under those tightly.  This is all contrary to my basic understanding of construction (and gravity, for that matter), but that's why THEY are building the deck and not me.  Me - 2 decks, Them - 200+, they weren't sure.

So here are most of the joists in place (I had to keep reminding myself; take pictures, take pictures).

THEN they put in the support posts.   I was getting the logic of it by then.  You only know where the posts and beams go when you REALLY know where the interior corners of the deck box are so you can push the posts up from below, put carriage bolts into the posts and beams, and THEN pour the cement into the holes to support!

The corner of my brain where my "Learned From Dad" experiences reside are all screaming "this is all bass-ackwards", but what I'm observing says "outside your box, watch and learn"!  So I shushed the Dad Corner and learned...

So here is a "support" post hung from the deck box, with cement poured into the hole.  Then when the cement hardens, it all flips around and the posts supprt the beams, which support the deck box, etc.  I'm still stunned.

This is the COOLEST gadget I don't own!  It clamps across a deck board, spaces the boards apart evenly 1/4".  Then you set a screw in the front and back holes (which are at angles), and drive them in!  The spacing is perfect every time and the screws are invisible.  Oh MAN, I love well-designed tools.

I also loved the screws.  In the old days, there were just straight-slot screw-heads.  Then there were   Phillip-Heads (an X).  Then there were square heads (which I use myself), then star-shaped and even "tork" which has 7 or 8 sides.  All the harder to slip the driver of the screw.  The guys use star heads.  But it this gaget that makes things so much easier.

Finally (yesterday), they attached the stair tread supports.  I am vaguely bothered by the deep cutouts on these pre-made stair hangers.  They just seem like they could break where the board is narrow.  When I built my steps on the old deck, I used solid 2"x12" boards and supported the treads on cleats attached with 1'2" bolts.  But I have to admit that 4 of those pre-made forms adds a lot of strength.

Still, I may add "sisters" (additional boards screwed to the sides of the preforms) the later. But 4 of those only a foot apart does look pretty sturdy.

Tomorrow, the completion!