New Soil Harder Than I Thought!

I got outside to prepare the bare front yard for new grass seeds, and the condition of the new topsoil wasn't as good as I thought!  It seemed loose enough when the contractor left on Tuesday, and I thought the track-tread of the spreader was light enough to not compact the soil, but I was wrong.

Yesterday, I realized the new soil had hardened like cement and there were deep tread-tracks embedded on it.  YIKES!  I sure can't plant grass on THAT. 

Well, I had expected to have to haul out my old Troy-Bilt Roto-Tiller anyway. 

I did that today.  I hadn't used it in many years, and equipment that sits around unused for 5-10 years doesn't like to start up right away.  But I filled up the gas tank, checked the oil, set the lever to "choke" (that's a good thing, if you don't know), set another lever to "start", and pulled the starter cord. 

Nothing!  20-30 tiring pulls later, nothing!  No big surprise, but I had hoped to get lucky.  I'm no expert with gas engines, but I know some basics.  So... I checked the levers to make sure they seemed to be working.  They were.  I checked the spark plug wire.  It was firmly attached and clean.  So I removed the spark plug itself.  Naturally, my socket set didn't have the right size cushioned spark plug socket, but fortunately it is slightly raised (sensible design) and I could loosen it with a regular wrench. 

I fully expected it to be fouled with old oil or needing to be cleaned and gapped, but it looked perfect!  Damn...  One always hopes for easy problems to fix.

Well, whenever I have repairmen around, I watch them carefully.  The last time I had a guy here to get a different piece of equipment (lawn mower) running, he said the fuel line/carburator was probably gummed up.  Now, you can either take the parts off and clean them, or get them running sneakily and they will clean themselves.  He did a "sneaky". 

He took the air filter off  (exposing the carburator) and sprayed a (flammable) cleaning solvent into it.  It loosened a stuck part and the lawn mower started right up on the next try.

Well, I don't have any fancy cleaning solvents, but gasoline is a basic solvent for old gasoline.  I took the air filter off to add a little gasoline into the carburator.  But I sure couldn't just pour gasoline from a big 5 gallon can into that small hole when I only wanted about a tablespoon of gasoline. 

I could have gone back into the house and gotten an actual tablespoon.  But I like to be resourceful.  So I decided that the socket that didn't fit the spark plug would work as a small container if I kept my finger tightly on the bottom.  It took a little work to splash just a small bit of gas out of the can, but I managed.  Then dribbled it into the carburator.  Puttng the air filter back on I pulled the starter cord.  Nothing.  Damn...

A second pull, and I'LL BE DAMNED, IT COUGHED A COUPLE TIMES, TRYING TO START.  ANOTHER PULL AND IT STARTED...  I had to play with the choke lever for a minute, but it settled down running smoothly.  I could barely believe it! 

Since it was running, I decided to use it on the hardened soil in the front lawn.  More about that tomorrow...

Bye Bye Ridge!

There has been this ridge in the backyard since I moved here 29 years ago (and by coincidence, this is the very week I moved here).  It has always been a problem.  Too sloped and uneven to mow.  A few years after I moved in, I was able to get it mostly cleared of scrub trees and vines.  But they kept growing back and English ivy slowly took over.  I cut back the tree seedlings many times and even painted herbicide on the cut trunks, but it hardly slowed them down.

I finally contacted an excavator who came out and gave me a quote for leveling the ridge and raising a portion of the front yard that flooded after heavy rains.  I accepted the quote on the spot and they said they would do the work the following week.  When they didn't arrive, I called only to be told they were too busy.

So I contacted some other excavators who decided the job was too small.  Only one agreed (reluctantly - he is 45 minutes away from here) and would not come out to give a quote - I would have to accept the cost afterwards. 

Then, Monday afternoon, the original contractor called to say they had a break in their schedule and could do the job the next morning if I was still interested.  I was, and they did!

I am delighted with the results.  They did even more than I thought they could (considering 2 small trees I wanted to save).

It looked like this to start...

They started by scraping the scrub tree seedlings and ivy off the top and sides.

Dumping it in a truck for disposal.  You can see the amazingly long ivy roots hanging down.  No wonder that stuff is so hard to kill!

The ridge was already nicely lowered from just that.

I would have had them just pile the scraped ivy all up in a corner to compost, but there was enough soil mixed in that they probably would have just kept growing.

See the soil dust rising from the bucket?  We havent exactly had drought here (lots of rain in June, but almost none since then).  Even 4' deep, the soil was dusty-dry.

The equipment is cool (literally).  The Bobcat cabin is sealed, air-conditioned, and has a stereo system inside!

They carefully worked around the 2 trees, watching for the 1st sign of main roots.  This one is a holly tree.  It's hard to kill.  When I first cleared the ridge so many years ago, I accidently cut it down and it regrew multiple trunks from that mistake. 

After all the scrub tree saplings and ivy were gone, they heaped up the remaining soil to examine the quality.  We had expected the ridge to be unusable gravel and clay, but it turned out to be good sandy loam so they moved it out as a base to raise the sunken front lawn.

Then they dumped 2 truckloads of topsoil on that!  They spent a good bit of time grading it carefully.   The whole area is now a foot higher than the drainage easement at the property line.  Unless we have a really severe hurricane before the grass I'll plant sets in good roots, my front yard flooding should be over.

They even spent time carefully smoothing the added soil to the existing lawn.

Here is the new front lawn...

And here is the new back yard!

I don't plan to cover the entire area in lawn.  Lawn is boring...  I plan to put a mix of Spring and Fall blooming azaleas around the inside edges of the trees and wildflowers and some long-lived perennials in  between them.  It will be fun to decide exactly what to plant where...

I need to drag out the roto-tiller first.  Even though the Bobcat has track treads to reduce soil compaction, the new surface is still too packed to just plant in.  The front yard will just get grass.

I wish I had had this done 20 years ago!

Excavation Back On Track

To summarize, after the two huge trees were removed weeks ago, I had an excavator scheduled to arrive the next week to remove a 6'Hx50'Lx15'W ridges covered with English ivy, poison ivy, wild grapevines, and various 3' weedy tree saplings that I have never been able to kill.

The excavation contractor came out, provided a quote for that work and raising the sunken front lawn.  I accepted their quote on the spot and we shook hands on it.  They said they would arrive the next week with a day's notice.

Near the end of that week, I called to see when they planned to show up.  They decided they were "too busy".  I think that they simply got better jobs and didn't need my smallish one.  I wrote a negative review on Angie's List (a contractor review site) and found another person who was slightly reluctant to do the job ( I was on the far edge of his work are) but agreed to to the excavation and plant removal (but not the lawn raising.  Well, I can get topsoil locally, so OK.  But it would be 2 weeks...  It bothered me that the person would not come out to provide a firm quote, but the person had an "A" rating in all categories one of which was "fair pricing". 

Meanwhile, I emailed the original excavator pointing out that they had offerred a firm proposal that I had accepted and we shook hands on it.  I expected a "sorry, we really are too busy".  Guess what?  They called yesterday afternoon and said they could come out this morning if I was still interested.

I was, and called back immediately to confirm I wanted them to do the work.  For one thing, they had come out to look at the work so they knew what was involved.  And they proposed to do the lawn-raising too.

Groundhog Update

First, if you just can't stand the idea of destructive suburban yard varmints being "eliminated", don't read further than this paragraph.  No pictures, and I won't be detailed about their fate, but I don't exactly "adopt them out to loving families". 

So, last post, I was seeking to capture the groundhog who was eating my garden melons.  I have 3 sizes of hav-a-hart cage traps (small, medium, and large - what else?).  The small one is good for squirrels.  I was using the medium cage for the groundhog (it seemed smallish), but apparently it was too small.  The cage doors kept being closed, with the bait pulled out, so the groundhog must has been able to back out of the cage before the doors locked on it.

I brought out the large cage trap  2 days ago.  It has only 1 door (the medium size has 2) and the trip lever is father in.  The groundhog has to be entirely inside to step on the trip-level.  I baited it with one of the melons only nibbled on.  I stepped on the melon to break it into pieces.  One small piece was at the entrance for enticement; a larger piece was inside the cage just beyond the trip-lever.

The next morning, the groundhog was in the cage.  It is "no longer with us".  I thought that was the end of the problem.  I've never had more than one adult groundhog here at one time before.

Wrong!  I stepped outside quietly to do some yardwork after lunch and to my surprise (you saw this coming, right?) saw a larger one running away from the garden.  I even heard it moving around among a serious bramble patch where I assume it has a burrow. 

I rebaited the trap and out it in the path I saw it run in with some of the remaining half-eaten melon.  And I made sure to put it where I could see it from the house.  Nothing like trying to see into my house from cage level...

An hour later, I saw another groundhog in the cage.  It is also "no longer with us".  It is late in the season for young groundhogs, but I will set the cage trap up again in a few days.

The good news is that I have an excavator arriving tomorrow, and the cage would be in the way of excavating equipment, so I have to wait.  The arrival of the excavator is surprise good news, but I will post about that tomorrow. 

Today was about the groundhogs...

I do want to say that I do not have an special dislike for "varmints" in general.  If I could look down across the street to some large field where groundhogs and rabbits happily ran around living their lives eating meadow plants, I would enjoy watching them and I would leave them alone.  When the squirrels used to be here just eating and burying acorns, I never bothered them.  When the rabbits contented themselves eating the plentiful clover in my organic lawn, I did not bother them.  I'm not sure what groundhogs eat that isn't damaging, but if they did, we would co-exist. 

But any common varmint that gets at the things I value, I will rid my property of them as humanely as possible and at no threat to wandering pets (no poisons, no snap-traps).  If there was such a thing as a "Golden-Eared Groundhog" that was endangered, I would catch it and offer it to whoever cares about them. 

But anything that eats MY food is asking for it...

Good and Bad News

The good news is that I found a residential excavator who is willing to come some distance to do most of the work I need.  I'm at the edge of his regular service area.  He'll do the leveling of the 6'Hx50'Lx15'W ridge and haul away the brush and gravel/clay soil, but he really isn't into bringing in topsoil and raising the front lawn level.  Well, I can get THAT done locally.  It will be 2 weeks before he can arrive though.  At least he assures me he WILL arrive to do the work.

The bad news is that I was a bit casual about finishing the garden enclosure and left some small seams open while I fussed around with getting the enclosure door  to fit (it kept getting out of square each day as the posts settled and the soil around them dried).  And then I had the tree removal crew here for several days and spend time after that cleaning up (they cleaned up, but there were still piles of ground-up tree stump chippings for me to spread out and such).  And I wasn't seeing any varmints bothering the garden.

Well, the varmint situation changed overnight several days ago.  I walked quietly into the backyard one late afternoon and caught a glimpse of a groundhog running away.  There were a few melon leaves nibbled off nearest the enclosure door, so I set up a live-trap cage in the barely-open doorway.  I didn't catch it, but there was no further damage.  So I figured it was both suspicious of the trap AND baffled about getting in otherwise.  The other open seams were way around the back of the enclosure. 

Foolish me!  I went out yesterday afternoon and found my 2 small (unripe) dwarf watermelons and 2 of my 5 (unripe) honeydew melons completely gone, and another half-eaten.  It had obviously found the backside openings!  I closed the enclosure door and set the baited cage trap closer to the path it must have taken to the back with a part of the half-eaten melon (a trapping website said to use whatever is being eaten as bait - though melons were usually best).  So melon was best for bait of both counts. 

This morning the cage trap was sprung but no groundhog.  But the bait was pulled out, so it must have reached in carefully and tripped the lever while still outside the cage enough to get free.  Well, I've never thought that varmints were exactly dumb; if they were, they would be extinct.  The idea is to use their habits against them.  I set up a "V" of upright 2"x12" boards to "guide" the groundhog to the trap.  That has helped in the past.  and I covered the cage trap with landscaping fabric to make it look more like a safe tunnel.

I'll bet it doesn't work.  But I did finally lock the enclosure door frame in place and seal the chicken wire seams around it, so that's no longer and problem.  There are still 2 more opening in corners, but it was dinnertime today and I was starving!  So I put a piece of chicken wire over the remaining melons, piled some melon leaves (which it also seems to eat) at the remaining openings (for distraction bribes) and called it a day. 

If I don't catch it by tomorrow morning, I have pieces of leftover chicken wire cut to size to seal the remaining openings.  After that, my garden area should be safe anyway. 

I still need the groundhog gone.  It will eat flowering plants too, and I can't protect everything.  In past years, a groundhog would show up in Spring, I'd trap it and relocate it.  Or find it's burrow and dump used cat litter into the hole until it fled in disgust.  But this August appearance is a surprise and I can't find the burrow (it may be in a neighbor's yard).

That melon-eating varmint has GOT to go, one way or another.

Mild Underved Destruction

One of the things I had to do when I expected the excavator contractor to show up "any tomorrow" was remove the birdfeeder.   It wasn't easy.  Try setting a pipe 3' deep in the ground for almost 30 years and see if IT is easy to pull out! 

It took work.  But I did it.  But then I had this thing with a 24" saucer under it and a 18" baffle below  (successful squirrel baffles) and no where to put it.  So I set it against the deck where the 24" saucer fit in tight.  Seemed safe.

Nope!  I went out today and the whole thing had fallen over.  And falling over, it broke!  I don't think it is repairable.  I'm going to have to build a new one.

Now, on one hand, I'm sad it broke.  It lasted 20 years (all cedar) and the cardinals and finches loved it.  On the other hand, I wanted to improve it a bit anyway.  I'd rather it had stayed intact, but I'll take advantage of the damage to build it better. 

A lot larger to begin with, and with an interior slope to make the last seeds go down to the feeding tray. 

But I wouldn't have to worry about this if the excavation contractor who said they would be here had come here instead of begging off for better jobs.  I'm still p&*@ed about that!

I hope the new feeder is as well-built as the previous one.  Some things just go better the first time around and you can't duplicate it.  So maybe the new one will be better and maybe not.

We'll see...

The Yardwork Excavation Contractor Blues

"GLOOM*

I spoke to the excavation contractor early today.  I'd been patient.  They (Della & Son) said on August 14 that they would be out to do the work "next week" (Aug 17-21) with a day's notice "because some jobs go way faster than others and some way slower, and to keep the crews busy they have to juggle the schedule".  OK.  Well, it isn't exactly urgent, like plumbing or roof repair work.

But when I didn't hear from them all last week, I called.  It seems they are no longer interested in doing my work.  They are "busy".  Good for them.  I suggested keeping me on their list, but they said they probably wouldn't get aroubd to my little job this year.

Stunned silence on my part...

I asked if they had decided their job estimate was too low; they said it wasn't, they just weren't going to be able to schedule the job.  And didn't want to keep my job on their list.  So, like "goodbye, and don't call us again".

Wow!  I was disappointed that they wouldn't do the work, but worse, it left me kind of out of options.  There are 2 kinds of businesses who do yard grading work.  One is excavators, the other is landscapers.  And all the others of both types had not been very interested. 

Excavators want to move around a lot more soil in open areas.  Landscapers are more used to residential grading, but their main thing is to plant the new area.  My job doesn't quite fit either.

The Della & Son proposal was perfect.  They would scrape off the plants (English Ivy, Poison Ivy, vines, and 3' tree saplings) from the surface of the ridge and dispose of the material.  Then depending on the quality of soil beneath that, they would either move it to the sunken front lawn, or haul it away as "fill dirt" (used to fill up ravines or to level under parking lots, etc).  If required, they would bring in topsoil to raise the front lawn above the height of the drainage easement.

No one else I talked to was willing to do that.  I was so pleased, I accepted their proposal on the spot, and we shook hands on it.  I am considering trying to shame them into doing the work anyway.

But I found another residential excavator today (Cornerstone Excavations).  His ratings are "A" in all categories and no one who wrote a review has been displeased.  Unfortunately, I am on the far edge of where he will travel to for work.  He won't travel to provide a firm quote.  He won't do the entire job (the spreading of soil on the sunken lawn isn't stuff he does).  But he does have the light equipment sufficient to scrape the ridge level and dispose of the unusable ivy and saplings without tearing the entire backyard up and he does the work himself.

The Della & Son proposal for the whole job was $3500.  While Cornerstone can't give me a firm price ahead of time, he estimates $1000 to scrape the ridge and $350 per truckload (estimate 2 truckloads) to dispose of the material.  He said I would get a much better deal having the topsoil to raise the sunken lawn done locally, and I think he is right.

Hoping that his estimate of $1700 doesn't suddenly become $3000 when it is done, I've agreed to send him pictures of the worksite and schedule the work.

Now, back to "shaming" Della & Son...  They gave me a written proposal and I accepted it, pending only a one-day notice for them to show up.  And they backed out.  I got their name off Angie's List (an independent contractor rating site).  Contractors care about their ratings there.  Della & Son have a straight "A" rating (price, quality, professionalism, punctuality, etc).  I'm going to give them a negative review.  Contractors often respond to reviews there.  I would still like them to do the whole project, because they had seen the work to be done onsite, described the work to be done perfectly, and given a firm quote.

We'll see what happens...

Waiting

Stream of semi-conciousness, "day-in-the-life" stuff...

And waiting, and waiting, and waiting.  For what?  Oh just the excavators who gave me a quote for scooping off the backyard ridge.  Why am I waiting?  Oh because they said they would be here "sometime this week" with  day's notice and "this week" is pretty much over now. 

OK, I actually needed some time.  It's amazing how much stuff needs to be moved to prepare for destruction.  I had to dig up 12 daylilies and pot them up for later replanting.  THey wren't happy where they were anyway.  And there were all those leftover posts and boards from the deck rebuild last Fall.  One can always use big chunks of lumber for "something".  I had to drag about a ton of THAT away from the ridge.

And then there was the birdfeeder on the pole in the ground.  Had to pull THAT up.  It wasn't easy.  It's been 3' deep for 20 years.  And just figuring where to PUT it during the excavation work was a trick.  I eventually did some minor repairs (well, as long as it was there, you know?) and propped it up against the deck.  If they get THAT close to the deck with their equipment, I want to know anyway.

Oops, I forgot the pots I sunk in the ground to make the stepldder level for refilling the birdfeeder.  Had to dig them up.  And, oh lord, the vinyl-coated wire cages I used to support the pepper plants last year were buried under wild vines, so they had to be cut loose with pruners. 

Wow, I forgot about the old heat pump support base that I used to help support the stepladder,  AND the old cement base that used to be a boot scraper and I'll-repair-that-someday.  Yeah right, but I had to move it.

So I'm ready.  Oh blast, the side of the slope is covered with flagstones from a previous project and I NEED them to make a stepping-off point for the new deck when I get around to THAT!  And dang, they are buried in vines.  So I need something to cut the vines and expose the old flagstones.  Ecxept the sickle is dull and needs to be re-sharpened. 

So into the basement I go with it to the grinding wheel.  2 minutes and you could dismember a mean bear with it.  Not that I have anything against bears, you understand, just a metaphor.  Or is that an analogy? 

Anyway, I start chopping vines with the newly-sharpened sickle.  Works great.   I can see the flagstones again, first time in years.  Woah, what if there are snakes under those flagstones?  Better go get the leather gloves.  Where DID I put those?  Oh yeah, in a sealed tub so that spiders wouldn't crawl in.  You laugh?  I have black widow spiders around here.  And I'm not allergic to MUCH but I don't want to stretch it too far.  Just in case, I stomp on the gloves a few times...

So, with leather gloves on (and nothing wet inside), I go after the flagstones.  Oh damn, there's poison ivy growing in there and I'm wearing shorts.  So into the house to put on long work pants...  That being done, back out to the flagstones.  Oh wait, where are the gloves.  Back in the bedroom where I changed into long pants. 

So now I'm at the flagstones (really finally).  I lift them up, one by one and toss them onto the lawn.  Something is weird about that.  Not only no snakes but no ant nests or anything.  I check...  The dirt is oddly solid. 

Whoa, there is carpet under the flagstones!  I forgot about that.  Old stuff to supress weeds.  I can't pull it up; the vines have sent roots through it, nailing it to the dirt below.  I think I will just let the excavators take care of that part!

So now I have 3 dozen flagstone pieces sitting on the open lawn, I'm drenched in sweat (yes real salty sweat - my maternal grandmother would have been offended "animals sweat; people "perspire" - yeah right)),  and the wiping towel I have with me is as soaked as I am.  Time to go inside.

Inside, I collapse.  So it starts to rain.  Oh damn, I have a radio outside.  Up I jump to retrieve the radio.  With that in the basement, I go out and look around for other items.  While I'm out there the rain stops suddenly.  Not even 1/8th inch...

So... I decide to try an save some azaleas.  Noyt to dig them up (there is way too much poison ivy around them) but I can try some cuttings.  Even THAT was tricky.  The poison ivy is thicker than I realized.  But I get branches cut off of 3 bushes that I think I recall being one each red, white, and pink.  Maybe. 

I'm starving.  When did I eat last?  Lat night.  I don't bother with breakfast much and I think I skipped lunch to get the worksite ready.  So I eat a whole peach, a plum, a handful of grapes.  And brew a cup of green tea to keep me going...

Its not enough and it is close to dinnertime.  I feed the cats a LOT more regularly than I do me.  So I feed them and then look in the fridge.  I have cooked hot italian sausage, so I can make sausage stew. 

Don't laugh, its good.  Coined sausage, sauteed green peppers, minced onion and carrot for sweetness, and cannelini beans (OK white kidney beans), tomatoes and tomato juice for broth.  OK, its more a soup than a stew.

So I decide to change my usual recipe to a true stew.  Hot water, flour and chicken paste. 

I cook for myself.  Have done it since I was in college.  Not having any criticism is nice.  I know what I like to eat.  BUT!  You know how sometimes things don't come out as planned?  Well, I eat it anyway.  But sausage SOUP is good and sausage STEW is horrible.   Don't EVER add a flour-based thickener to sausage.  *I* sure won't ever again...  Worst meal I've made in a YEAR!

The meal was sort of saved by the salad I made of 2 heirloom tomatoes, onions, cucumbers and shaved carrot with Italian dressing.  And an ear of corn.  And 3 chocolate truffles...  And another peach, plum, and some strawberries.  And more wine than I usually drink.  I deserved it...

And I'm STILL waiting for the excavators to call me about the proposed schedule for removing the ridge!

Good thing I'm finally ready for them to arrive...  Finally.

Garden Enclosure Screen Door

The garden enclosure door is giving me trouble.  The posts holding it keep getting out of alignment.  Sometimes the top sticks.  Sometimes, the latch won't catch.

I've bought some additional pvc pipes to help hold it in place, but I had to get the frame in alignment first.  One post had to be raised 1/4", and that was trickier than I thought.  Since it is stuck in the ground 2', the idea was to pry it up 1/4" and then hold it there while nature lets the soil below it expand and fill in.

So the first part was to lift the post.  Easier said than done.  I dripped water in around it for an hour, and that did loosen the post.  But lifting the post isn't just pulling it up a bit.  There had to be something to hold it up the 1/4".  And I don't mean to suggest that I am strong enough to just pull it up that much.

I had the idea of screwing a 2x4" board to the post and prying on the bottom of that board.  That would work, but how would I hold it there?  I tried putting a 4x4" post against the top of the frame and then lifting it with shims.  I did that, but the frame didn't rise.

All I was doing was pushing the post into the dirt...

Arggh...

And if I put a board under the 4x4" post, that was too tight to make it fit under.  I had to re-think it.  And the 4x4" post I was using to raise door frame was the wrong length by 1".

AHA!  I set a scrap piece on board in the screen doorway and set the post that was "just" too long on the board at an angle.  Pounding that 4x4" post that was at an angle, toward the post I wanted to lift worked!

Look at it another way.  The door frame post and the ground made a right angle, with the bracing post resting on a board at the bottom making the hypotenuse.  By pounding the bottom of the bracing board with a small sledgehammer, I pushed the top of the door frame up the required 1/4".  Hurray!

But how to hold it up?  The bracing post prevented the door from closing...

Well, that baffled me for a few minutes.  But then I realized that if I screwed on a board near the bottom of the door frame post  on the opposite side, it would hold it up for ever.  Well, I didn't need "forever", just long enough for wet soil to settle below the door frame post.

SO...   I set a cinder block next to the door frame post, stomped on it a few times to settle it into the soil so it wouldn't sink under pressure, and put a scrap piece of 2x4" board atop the cinder block.  And I screwed that board into place.

So the post holding the latch side of the screen door (that I had just raised 1/4") won't settle back down (the piece of 2x4" is resting on a cinder block that won't settle into the ground and the 2x4" board is screwed solidly into the door frame post).

I can leave all that in place forever.  Its not in the way of the door closing.

But the latch doesn't "catch",  I can solve THAT.  A small piece of aluminum fill fix that.  Actually some would a plastic credit card.

Just accept that the door and latch will now work, and that the screen door closes as smoothly as silk!

Tree Removal, Day 3 (Part 2)

Well, OK, time to wrap this up. I'm ready to start posting about other projects...

A 2nd crew came out for the final part.  They had a different tree trunk "grabber".  The previous day's grabber had hydraulic problems.  So did the new one.  Apparently, from what I overheard, the hydraulic lines can fall loose and then get cut if the crew isn't careful.  I have some square foot spots with hydraulic fluid on my lawn which can't be good for the grass.  I will have to replace some soil...

They finally had to use a small fork lift attachment (which must have used a different set of hyrdaulic lines) to move the last sections tree trunk away.  It worked well enough.

BTW, see the shadow in the lower right above?  That's my deck, with me resting my camera on the deck rail for stability, and me wearing my straw hat.  Cool!

With the last pieces of tree trunk removed, the crew brought the stump-grinder into play.  It a 2' diameter circular saw but with teeth like a small T Rex.  The operator hanles 3 joy-sticks like some super arcade-game-player.  He stands behind a shield, and wears super goggles for protection. 

I found that hilarious.  He wears the goggles because he can't see through the viewing screen in the protection door.  He can't see through the viewing screen because all the flying wood chips abrade new ones in just a few days of use.  Doesn't seem like a really well-designed product to me...

Anyway, the grinder blade is moved back and forth, up and down, forward and back (three directions, so 3 joysticks) and can take off about 1/2" of wood at a time.  So 10" of remaining tree trunk and going 6" below ground level took a while.  2 hours or so, actually.  It finally looked like this...

Well, they did remove the other tree pieces, but I can't find the good picture of the "after" right now.

The grinder guy wasn't thrilled to have to go below ground level on the stump (all that extra work), but I had made sure that was part of the quote, so I insisted.  Getting the stump below ground level hastens rotting and prevents the roots from sending up endless shoots.

They insisted that they had to spread the wood chippings out as company practice, so I didn't argue.  I'll take care of that later. 

All the gardening experts say that raw wood chips are NOT good for spreading around plants and shrubs.  First, the decomposing wood uses up all the nitrogen in the soil.  Second, it attracts slugs and snails that will eat your plants.  Third, "artillery mushrooms" love to grow in it and they spread their spores by exploding (hence the name "artillery") and the stuff leaves bright sticky pink material up to 4' away.  Not a problem where my chips are, but I've seen pictures of the stuff staining cars and house siding.

They did a great cleanup job!  They not only raked the entire worksite of all leaves and sticks, they got up on the roof and blew all the debris off there.  Then they even swept the gutter screens clean!  Finally they blew the sawdust and debris off the deck. 

Even with the delays from the equipment hydraulic lines on 2 pieces of equipment, they did an outstanding job.  I'll forgive the small puddles of hydraulic fluid leakage on the lawn as collateral damage and repair that myself.  The compacted soul from the equipment running all over it needs repair anyway.  I'll dig up the oily spots and trash it, then work the entire area over with my roto-tiller.

And I have an excavation crew coming in next week.  Maybe they will do that for me as part of the project.  I mean, they are digging up soil and disposing of a lot of it (a ridge of weeds, clay and gravel) anyway, and then bringing in 2 truckloads of topsoil to raise the sunken front lawn, so a bucketloader could dig up the "soiled soil" and replace it with a little of the new topsoil.

We'll see.  They are coming out here next week (day unknown).  Their work is tricky to schedule as sometimes other jobs go fast or slow, and I get only a days notice of when they will arrive. 

More about THAT next time!