The Tree

Start To Finish...  And a long one; as someone said, "grab a beverage", LOL...

I was initially discouraged by all the branch and stem and twig adjustments needed.  It sat there with just the base opened for a week (I seem to have lost THAT picture sadly).  I dithered about returning it and buying a real tree, the amount of work to adjust all the ends was daunting, but adding all the lights to a real tree is no great fun either.

It seemed so balanced either way... 

But my earliest jobs required a lot of repetitive work, and I WAS good at that, so I considered managing all those bendy branches from a repetition work point of view.  They were assembled in a way, they must open in a way.  I found a pattern.  The internal branches go "left, right, up, down" just to fill in the background.  Its not like you are going to hang ornaments next to the trunk of the tree.

So I just started spreading the tightly packed stems and twigs.  The instructions said "10 minutes and you have a lovely tree".  HAH, HAH, HAH!  But 3 hours and I did!   just had to actually stnd there and DO IT.  The biggest annoyance and time-waster, was that the outer "new-season" twigs were flat on one side and full on the other, and they were almost always upside down.  Easier for the poor people constructing the trees I assume, but poor quality-control at the end of the production line.  I'll bet I had to turn over 1,000 stem-ends.  But only once.  Next year, I won't have to.

It helped to wear thin "driving gloves".  Those plastic needles can wear on you after a while.

So it was a good-looking tree after all the set-up.  It looks better than I expected, actually.

Then I turned on the built-in LED lights...  WOW!

With camera flash...

With slow-synchro camera flash...

With camera flash OFF.  The lights really shine that way.  And it looks the same with the room lights off.

And decorated!!!   With flash on...

And off...

Hmmm. ..  Didn't notice that one cardinal was fallen over...  Well, everything can't stay perfect.

I love real trees for the smell and reality.  And you don't have to arrange the branches.  And I'm not sure tree farms harm the environment.  They produce oxygen.  And I know one cat who survived under them until finding a Forever Home...

But fake trees have advantages too.  One lasts for a decade or so, they have 1,000s of built-in LED lights, they don't require watering so they are safer.  And in theory, they can fold up "OK" with the branches spread (but folded up, if that makes sense).  Well, let's just say it wouldn't fit back in the box, but it will take up less space than as currently spread out.  All the branches are on hinges.

I always hate to say this, given my general sarcasm to "Martha Stewartism" but this IS a Martha Stewart Tree...  (According to the box and I didn't know that at the time).  All I knew at the time was that it was a pretty realistic-looking fake tree...

But what finally decided me on keeping the one I bought was that the branches are sturdier than real trees and I have a lot of rather heavy ornaments.  Ornaments that I could not keep hung on real trees stay on this one.

But I have a lot of very light ornaments too.  So I think I will alternate between live trees and this one.  Best balance I can make.

Tomorrow, close ups of the decorations...  I forgot to use the macro setting and they were all blurry up close.  So I need to take new pictures.

But the close-ups are great, so tune in tomorow.

Coincidence and Memes...

Its a small world after all.
Ita s small world after all.
Its a small world after all.

Its a small small world.

Now get THAT out of your head...  LOL!

And I was actually there to hear it originally...

The weirdest thing about the trip to the 1964 New York Worlds Fair (I was 14) was that we stopped to have lunch at some exhibit (I want to say "Wisconsin" but don't hold me to it) and there, just several places down these long tables, by utter coincidence, were our neighbors from up the street..

It WAS a small world after all.  According to a display, there were only 175 million Americans at the time.  If I recall correctly (but then, I WAS only 14 and memory is tricky).

And I'm STILL trying to decide whether to keep the artificial tree or buy a real one...

Holiday Tree

I should have known not to buy an artificial Holiday Tree!  I don't like artificial things all that much.  And I didn't even go shopping to get one.  I was at a DIY store to buy furnace filters weeks ago, and there were all these nice-looking artificial trees so nicely decorated.  Two thoughts came to mind.

First, I recalled memories of younger days with the family decorating the tree, and I thought a nice artificial one would be "satisfactory", convenient, and cost-effective over the years.

Secondly, I had had to empty the attic a few months ago to have the attic sealed and additional insulation sprayed in, so I had all these boxes of Holiday decorations stacked up in the cat room.  The decorations were on my list of things to keep or donate.

So I was looking at the trees in the store and thinking of the all the decorations I'd collected over the years and ON IMPULSE I bought an artificial tree.  Impulse purchases are not my habit, but by definition "impulse" is not planned.

I opened the box today, and it was NOT what I expected.  I EXPECTED a box of a dozen or so stacking rings of perfectly formed branches that would be ready to go with a simple plug-in (and me adding special ornaments and my bubble-lights.  Foolish me!

Instead, there are only 3 sections (of branches that DO hinge down, to be fair).  But each branch is as tightly squeezed into a tube-like shape as wrapping paper.  Each individual stem and twig has to be bent out into a realistic shape.  A quick estimate suggested there would be 100 branches of about 20 stems per branch and 20 twigs per branch (= 40,000 if you really do it right).

A sample branch of the middle section took 2 minutes to make look realistic.  So, 2 minutes times 100 branches = 200 minutes (or 3 hours and 20 minutes).  And adding in some time for discomfort caused by handling the prickly plastic needles, hand-cramps from all that bending of stems and twigs, and back-cramps from being bent over and around reaching them, I decided that was more than I wanted to do in order to have a Holiday Tree!

I re-evaluated my concerns over killing live trees.  I guess if I am perfectly willing to have chickens and turkeys raised just for the purpose of being killed for my eating pleasure, I can stand having a real tree grown and cut down for my decorating pleasure.  At least trees just use sunlight and produce oxygen.

Hey, I can rationalize my decisions with the best of them, LOL!

That's IF I get a real cut tree...  I probably will, but it's not definite tonight.  I haven't bought one for a decade, so there may be sticker-shock involved.  I have to think about this.

Its not like there are children or visitors who would see my tree.  But it HAS been years since I decorated and I DO have all the boxes of decorations out of the attic already.  And none of the cats has ever experienced a real tree in the house and that might be interesting.  Skeeter and LC (and the cats who came before) always seemed to enjoy them.

I could justify buying a real tree just for the cats, I suppose...  Hmm, yeah, that could work.  A tree just for the cats.  And they wouldn't mind if I decorated it with cheap plastic ornaments at the bottom where they could reach to whap them.  They'd LIKE that...  I'll put the "good" stuff higher up.

And the birds would like it too.  I used to dig a hole in the backyard to set the tree in after I was done with it inside.  The tree leaves a bare spot under it even when it snows and the birds LOVE picking at the seeds I toss under it.  I had almost forgotten about that.

So, well of course, I'm not buying a live dead tree for ME, I'm doing it for the cats and then the birds.  What could POSSIBLY be more noble?

Oh my goodness!  I better go shopping for a real tree ASAP.  The cats are waiting, and the birds will be happier into the New Year, and the New Year is something to celebrate too...

Mark

Men Are From... Camo?

I was shopping at Walmart yesterday.  I had a list.  I shop at Walmart for some brand-name items they happen to sell cheaper (cat litter, non-prescription drugs, vitamins, printer ink, calendars, etc).  I rarely buy anything not on my list (I am a relatively disciplined shopper).

But pushing the cart past the shoe department, I was stopped in my tracks.  I'll try to do a Ron White imitation here (I love his off-beat, low-key style)...*

They Call Me Camo Slippers

"So I was in the Walmart, the other day, and in Maryland, they can't sell liquor, so that was a bit weird.  But the printer ran out off all the ink at the same time, and I needed to print out Holiday cards and the Staples store wasn't open yet.  I'd been up all night destroying the Pogo.com Scrabble bots, and suddenly I felt a need to go buy kitty litter.  Yes, there was wine involved, isn't there always?

So there I was in a Walmart that doesn't sell wine in a State that doesn't allow it, and I carted past the shoe department and put the brakes on the cart.  There were slippers!  Now, I love my feet.  They mostly keep me upright, and with enough wine, that's a good trick!  I appreciate that...

I own a few pairs of slippers.  My favorite ones are the Hobbit slippers.  Bigger footprint - better standing up ability...

But these were CAMO!  I checked my internal inventory list and I was pretty sure I didn't have any camo slippers.  Then I checked my internal inventory list a 2nd time and it agreed with the 1st list.  Internal consistency in wonderful.  Not something that happens all that often for me.

Yep, I didn't have any camo slippers...

I HAD to have a pair.  Now, Walmart usually has only 2 sizes of anything.  XXL and small.  Fortunately, and as my several ex's have commented, "small" is about right for me.  You can argue about size all you want, but you can't fake shoe size and I'm a 7.5 (or an 8 with really thick socks).

Sorting through the 1,000 dozen XXL slippers, I found the 1 pair of small , and tried them on.  Which was rather easy; my favorite type of shoelace is "velcro" and my shoes mostly use those.  You can be too drunk to tie a shoelace but you can't be too drunk to use velcro.  Even a close try works.  It may have been invented for that purpose.  Sure, NASA says it was for astronauts with clumsy gloved hands, but I know better.  The astronauts were sniffing the fuel tanks for a lack of wine...

So I tried them on.  They didn't fit - they were actually too small, and I'm not used to that!  I bought them anyway.  Fortunately, there was paper stuffed in the toes.  Not unlike what I do with my pants personally when I go out to bars.  That can get awkward at times, but usually doesn't alter the course of the evening.

But I bought them because they were CAMO, and "camo" is to guys what "pink" is to women.  It defines us small macho types and suggests what is not really there.  Like pink lipstick, and rouge and all those things the women use to suggest what is not really there.  You KNOW what I mean...

I'm wearing the camo slippers now.  I feel MANLY!

Never mind that I am hardly invisible in the house because of the camo slippers.  You can't be invisible when you are wearing bright green golf pants and a red plaid shirt just because you are wearing camo slippers.  But you can PRETEND to be.  You can THINK you are invisible.  

Let's say a lion has crept into the house.  He knows you are there, SOMEWHERE.  But he can't find you because you are wearing your camo slippers!

So that's when you grab the ever-sharp Ginsu knife and slit its throat!

And THAT'S why I bought the camo slippers..."


* Everything except the camo slippers is completely fictional... 
Everything except the camo slippers is completely fictional...
Everything except the camo slippers is completely fictional...

This started by me wondering why men love camo clothes (and I do) and sort of took on a life of it's own.  And there IS something about camo that men love.  Hope you all enjoyed it... 

Missing Skeeter

TBT:  Today, 6 years ago, my heart cat passed over the Bridge.  His name was Skeeter and he was the best cat I ever had. 

He slept under the covers hppily without dsturbing my sleep, he sat on my lap without feeling heavy, he licked my hand without roughness.  He happily ate whatever I provided (especially tuna), played wand toys any chance I gave, and was a kind and protective big brother to LC who arrived the year after he did.  He protected LC from Mean Old Tinkerbelle. 

He patrolled the yard endlessly to make sure there were no introoders.  He was a dedicated and talented Mouser.  He was always relaxed in in himself, by which, I mean he knew who he was and never had to pretend to be otherwise. 

Skeeter was Skeeter all the way. 

He had a hard start.  I found him in a small local pet shop alone in a cage where the whole store was being beaten apart loudly.  I had gone in looking for a Siamese, I came out with him.  It was one of the best decisions I ever made.

He never quite recovered from the horrible noise and dust of his kittenhood, and I protected him from that all the days of his life.  When LC came along from the same store, he welcomed her.

Skeeter was MY kitty, LC was his...

Skeeter once grew to 16 pounds of mancatly hunter.  I saw him jump once 6' high to catch a sparrow.  He was all muscle!!!

In his last years he lost weight down to 14 then 12 pounds.  He was still a great hunter.  There were fewer voles and mice his years than any years before or since.

In his last year, he lost weight and muscle.  I had never had a cat who lived to 16 before.  The Good Vet explained about kidney failure and we did our best for him his last months.  The vet said he would start to loose balance at the end, but would not be feeling pain, but that I should bring him in at that point. 

"That Point" occurred on December 9, 2008, and I brought him to his final vet visit Dec 10th.

He left my world at 3:45 PM, in my arms, as I told him much I loved him...

I brought his body home and laid it out for LC and Ayla to sniff.  I wanted them to know (as best they could) that he gone, not wandered off.  LC understood, I think.  Ayla was young, but she seemed to understand.  They both sat next to him for a while.  Then the both slowly walked away at the same time.

I brought him out to the spot he had last seemed to enjoy and dug a 2' deep hole for him. 

I love Ayla, Iza, and Marley very much, and I am deeply glad for them.  And I am glad for the ones who came before.  But Skeeter was the first cat who lived his whole life with me and had me send him off to the Bridge. 

His first moment home...
 
 In his prime, and just look at those fur patterns..

On his last day...
Oh Skeeter, I miss you so much.

You would be proud of the Cat's-Who-Came-After.  Marley keeps the peace as you did.  Iza and Marley are great mousie-hunters.  Ayla remembers you (and LC), and is the great hunter you taught her to be.  Your hunting skills have lived on from one generation to the next...

I just KNOW you and LC are romping through the fields over the Bridge together.  We will meet again one day...

Officially Old

I had another "I'm Officially Old" event today.  I got my shingles shot...

I had been thinking of it for a few years, but I figured I would have it when I visited my regular Dr for an annual physical.  Only I keep not doing that.  The Dr I last visited left the area and I just keep not finding another.

Part of the problem is that I am, as my friends say, "disgustingly healthy".  I haven't had a cold or flu since I was 12.  And even then, while my brother lay sounding like he was dying of flu, I was only mildly annoyed.  I even had to heat the thermometer over the heat vent to get it high enough to stay out of school an extra day.

I only got my first flu shot when Dad was living here in 2012 because I read that you can be infected but not show signs of it yourself, but can infect other, and I didn'r want to kill Dad inadvertantly, so I got a flu shot.

I got it at the local grocery store.  The shot was so good I couldn't even tell he had done it without looking.  The same in Dec 2013.  Dad had moved to an assisted-living facility by then, but I decided I should probably get the annual flu shot for the safety of others. 

So I got the flu shot again this year and probably will each year for the rest of my life.  Not so much for me, but in case I can carry it without symptoms, getting the shot seems socially responsible. 

No pain, $30, no big deal and I get a 10% off coupon for the days shopping.

This year, I got the shingles shot.  Its not covered by my (or darn near any)insurance, but it seems to be something that attacks 1 of 3 people my age who had chicken pox as a child (and I did).  Mom had it and it drove her crazy for weeks several times.  So I sure didn't want to go through that.

I actually felt the shot!  The previous flu shots were nearly undetectable, but I felt the shingles one.  The Pharmacist said it the larger amount of injection.  Well, 1 second of mild "ouch" isn't much to complain about.  It was just that I was surprized.

The Pharmacist insisted on putting bandages over the injection sites "because they bleed.  I told him not to bother because I heal oddly fast.  But he had to according to "the rules".  I took them of as soon as I got home and there wasn't the least drop of blood on them.

They never believe me about not bleeding, but I don't fight about it.  If it makes them happy to put a bandage on, fine.

I probably don't need the flu or shingles shots for myself.  They are both viruses and I seem to be immune to viral  infections and colds.  Maybe I should contact a testing experiment.  I suspect that because I spent 30 years in carpools with young mothers who both had sick kids AND went to work when they were sick themselves. 

If I can't get sick around sick carpool members an hour each way in an enclosed car while the sneeze  (and sometimes did worse), I probably can't get sick.

Not to say something new coming along wouldn't kill me next month...

I think it is genetics.  Ancestors from all over Europe, into North America  (Canada and US and likely some Native American).  Wish I had a bit of Asian ancestry too.  Viruses aren't going to kill me; smoking will...

Bet I catch something awful just because I've mentioned all this...

A Ghost In The Machine

Well, not a ghost of course, but there is a weird harmonic in my heating ducts that is making a disturbing noise...

There's a pattern to it.  The heating comes on about 22 minutes each hour when it is below freezing outside.  A function of the insulation of the house.  About 10 minutes into the heating cycle, this odd sound starts and stops.  Imagine a 1-note C on a wind instrument...

Not that I can tell notes, so imagine any moderate note on a wind...

Its obviously a harmonic in the ducts.  I can feel the vibrations if I stand on a ladder long enough and touch the ducts, but I can't pin down the source.  This isn't the first time either.  Previous years I've wrapped bungee cords around some pipes and ducts and it has stopped for the season. 

But it keeps coming back year after year.  I can't call it "spooky" because I haven't the least sense of superstition, ghosts, etc.  Its just a noise caused by a vibration I can't seem to stop. 

It seldom happens in daytime.  And I would notice it if it did.  You live in a house 28 years and you know every creak and squeak.  But at night (when it is coldest), it starts. 

Slowly, a tiny vibration at first.  Then a little louder.  And longer.  After a few minutes, it is going on for 15-20 seconds.  And a minute later it starts again.  Stronger and Stronger until it sounds like a trash truck driving by, but its not, and then the demon in the ducts stops suddenly.

I was up 3 times last night trying to figure out the cause.  It eludes me.  I can feel the vibrations anywhere I tough, but that stops it.  For a few minutes. 

I'm making light of this, but it really is driving me nuts and waking me up at night.  And I sleep poorly enough as it is.  It even got into my dreams...

Anyone had this problem, have any ideas on how to stop it?  I'm thinking of removing all the existing rubber straps that have "solved" the problem before.  Maybe if it gets worse, it will be easier to identify the real source...

And, BTW, I'm "pretty sure" I'm not insane...

Thanksgiving Day 2014

I'm thankful for a lot of stuff, but I mention those things as they happen.  Today was TURKEY DAY!  I often don't bother cooking a turkey, for several reasons:

1.  I assume a standing invitation to visit my sister for Thanksgiving day.  Sometimes I visit, but 2 hours driving each way is a lot for me (I hate driving at all) and I especially hate holiday traffic on crowded interstate highways like we have here. 

2.  I used to cook Thanksgiving Dinner for all my single friends, but over the years, they have gotten married, left the area, or gradually faded away.  It was a habit from when I had apartment roommates for whom a TV dinner was a challenge.

3.  The smallest whole turkey is about 10-11 lbs and that's too much for 1 person (even with 3 cats)

4.  A turkey breast is smaller, but white meat is not my favorite.

5.  I prefer the dark meat, but turkey thighs cost $5 a pound this year and chicken thighs (my most regular meat) is only $1.29  and turkey isn't much different from chicken.

But I decided to go for a turkey this year.  Partly, I wanted to hickory-smoke a whole turkey, just because I hadn't for years, and partly just to fully participate in a holiday for a change.  So I had the frozen turkey all thawed in the fridge for 4 days, brined it overnight; and injected it with a mixture of apple juice, cinnamon and spices. 

Most of the smoke gets in meat during the first couple hours so I did 2 hours and then let the briquets die down til it was 200F in the smoker and transferred the turkey to the pre-heated 250F oven.  It was slow...  But I wasn't on a schedule, so "whenever done, its done". 

I did it a bit fancy for just me after that.  Baked brussel sprouts with grated nutmeg, asparagus with grated cheese and melted butter, small potatoes, a nice tossed salad, gravy, and a can of "sweet potatoes in syrup".  Zinfandel wine.

Well, one bite of the canned sweet potatoes in syrup and that went straight to the compost bin.  YUCK!  The rest was good.  Well, the packaged gravy was salty.  I had it sitting around for years so decided to use it.  I make it better myself.  The brussels sprouts were good, the new potatoes (home-grown) were good, and I always love a tossed salad with italian dressing.

The turkey was PERFECT!  Probably the best I've done.  The smokiness was just right, the brine kept even the breast meat moist, and the injected flavors were just right.  I am convinced that 2-3 hours of smoking outdoors and finishing up in the oven at 250 is the way to go.  And I do that thing of cooking it breast side up half way and turning it breast down the remaining half.  It makes a difference.  "Breast side down" the last half of cooking keeps the breast moistened by thigh meat fats dripping down the sides.

To be fair, the 450F oven cooking for 30 minutes and then lowering the temp to 350 works pretty good too and I've usually done that for faster cooking (and more reliable timing), but the slow-cooking is best.

I don't set out a whole table display (its just me), so there isn't much to show, but the turkey had a beautiful mahogany skin, so I have a picture of that. 

I hope all of you who went the turkey path today had great dinners too.

A Little Computer And Some Garden Problems

COMPUTER:  Well, first, I KNEW everything wouldn't be perfect on the new old laptop.  The thrill of connectivity deceived me.  Oh, it's not terrible news, but the "M" key came loose right away, and my feedly.com reader list keeps disappearing from the sidebar.  It sticks on the desktop but not the laptop.  I'm sure I'll find out how to stick it permanently, but haven't so far. 

And there are other annoying problems.  I'm sure most can be fixed, but some may just be part of using a laptop.  I was expecting that since I was only using the laptop for reading blogs (at the moment), what did I care about security?  There's nothing ON the laptop.  But then I started getting unending, nearly constant ads.  It was like "Whack-A-Mole"!  Close one, another pops up.  I went 15 minutes doing nothing but closing ads at one point, and even closing some of them seems to have generated some email responses to the ads even though I don't have any email set up tat I know about.  Probably some basic gmail embedded in the computer.

I went into the system preferences and made some adjustments which reduced the ads but haven't eliminated them.  I was hoping not to have to buy MacKeeper for the laptop (it can prevent pop-up ads among other things.  I may find free software that does that.  Apparently, I'm going to have to compare files on my desktop to the laptop, see what I can copy over, and maybe buy some simple versions of other software.

If anyone has Mac desktop and laptop equipment and some of those things sound familiar, please drop me an email with any useful advise, please!  Reattaching the "M" key is actually a priority, but the other long term stuff is more vital.

GARDEN:  We had an unusual 70+ day today, so I set about constructing the 5th of 6 framed beds.  I thought it would go fast, but NOOOOO....

I mostly have to laugh at all the surprises a project can offer.  Well, it doesn't help to complain.  Not that I don't both laugh AND swear sometimes.

I got out in the garden at 1:30.  First, I had to carry the precut boards  (by me, not the Home Depot guy after the first bad experience).  I carried one out to the garden, then decided to try using the dolly to carry 2 at a time.  Didn't work, they were too tall and awkward.  So I carried them all out one at a time.  2"x8"x7' preservative-treated boards are heavy, but on my shoulder one-at-a-time worked.  That part was fairly expected.

So the 5th frame was to go 2' from the last and since there had been old beds there before (full of good soil), I only shoveled soil enough to lay down the new boards (different sizes from the old and 90 degrees in rotation).

Dragged out all the usual tools from the shed, connected the 150' of electrical cord, set up the radio on Classical, and started to dig some trenches where the new frame would set level.  There are invading vines from a neighbor, and I have been digging them out as I go.  Dig, pull, toss, dig, pull, toss...  Only one looked odd out of the corner of my eye, so I looked at it.  A poison ivy plant!  Sure, why not?  I haven't seen a poison ivy plant in the garden for several years and I was holding it in my bare hands.  Might as well find one now. 

So I dropped it in a remote corner where it could die peacefully and went into the house at once to wash my hand.  Holding the hand up so that I wouldn't touch anything in the house with it, I got safely to the bathroom and washed with soap for 5 minutes (hurray for pump soap).  Then I washed again with rubbing alcohol.  If I'm not complaining of poison ivy in 5 days, you'll know it worked.

So I was back out at the garden and set out the corners for the 5th bed.  Which meant clamping a long straight board to the end on the previous bed so that they all stay even with each other.  Naturally, I had brought the small clamps back to the house for a different project, so back to the house I went.  That 150' of walking back and forth adds up!  So I clamped the "straight-edge board" and set some corner bricks to support the lower lever of the frame.  Yes, I've developed a routine after the first 4 beds.  Experience accumulates.

The distance to the far end of the 5th bed was farther than I eyeballed it, so I had to rip out more of the old frame boards and dig off more old garden soil into the existing beds than I had expected.  More time gone.  And then I hit a 3" tree root from my neighbor's junk trees.  And I mean "junk".  He just let whatever grew, grow.  None of them are good trees, just invasive ones that grow thickly and unhealthfully.  Someday, I may ask him if we can just cut them down and plant nicer smaller ones like dogwoods and crabapples or whatever he likes.

But it meant I had to find my ax to cut the invasive root, which was back in the house, of course (for a perfectly good reason).  Then I remembered that the ax was a bit dull, so I had to sharpen it.  And the bench grinder on a stand was behind a bunch of stuff moved when the insulation guys worked in the basement, and by the time I got access to it and sharpened the ax to "OK" that was another quarter hour gone.  And of course, the root was loose in the ground so chopping it with the ax took some time.

An hour and a half and I still hadn't gotten the first board in place for the 5th bed...  I used some bad words.

But I was finally able to start with the frame.  Previous frames, I leveled first and constructed later.  I tried constructing first this time.  If you place bricks angled at all the corners, you can get all the board corners to match.  That worked pretty well.  I got the lower layer of the frame attached in only 30 minutes.  That sounds long, but I am obsessed with getting all the corners matching as perfectly as possible.  These beds should last 20 years and I'll be looking at them a lot, so why not go for the best appearance?

To construct each layer of the framed bed, I set the long boards on a brick at the corners.  The brick also holds the short end boards at the same level.  After that, I can use long clamps to loosely hold the 4 boards together.  After that, I tap the boards until the square ends match up.  Sometimes the boards are not exactly the same width, so I wedge one up to match the next.  I used little twigs on the first few beds but realized the axe blade was very good for that.

I have 2 drills for the project.  One is a standard electric drill for drilling pilot holes for the long screws that go though both boards at the corner.  The second drill is a cordless drill with a screw setting (has a slower speed and a torque control to not overdrive the screws in).  But most importantly, it means I don't have to keep changing the drill bit for the screwdriver bit.  And I'm using lubricated star-drive screws designed for preservative-treated boards.  Those resist the P-T board chemicals AND go in easier.  They are worth the very slight extra cost.

I got the lowever level of the framed bed finished and saw bad news.  The sun was on the horizon!  It was only 4:15!  But my horizon is not flat horizon.  The land slopes up radically on my west side.  But I had all the tools out, the 2nd level of boards ready, and I wanted to finish the 2nd level today.  It supposed to rain tomorrow and get colder.

And wouldn't you know it, my box of screws was empty.  Back to the house...  I thought, and correctly, that I had another box of them "somewhere".  Took only 15 minutes to find them.  Yes, they were in an obvious place, but not obvious to ME today...  LOL!

So back outside in the fading light.  Fortunately, the 2nd level of boards is WAY easier than the first.  And I found a few quick tips to make that easier.  I had used a square piece of 4"x4" to establish square corners on the first couple of 4' wide framed beds.  I found that using 4" bar clamps on the 3' wide 3rd and 4th beds was easier.  I tightened them loosely, tapped all the corners flush, then tightened the claps more and drilled the holes.  Worked great. 

Except the 5th and 6th beds (like the 1st and 2nd beds) are actually 4'3" wide and the 4" clamps are JUST too short.  Well, guess what, you can hook 2 clamps together!  So I attached a 4' clamp and a 12" clamp across the beds at both ends and locked all the corners tight after making them flush in all directions*. 

After that, and with the sun over the local elevated horizon, I got the last of the screws in!  The framed bed isn't complete.  The 2 levels are not attached to each other.  I uses a 1"x6"x6' P-T board for THAT.  I attach it on the inside of the long boards.  Half the width above the seam between the frame boards and screw it on.  Then attaching screws in that 1" board below, draws the 2 levels together beautifully!

Tomorrow isn't going to be as nice as today.  50 degrees vs 75.  But 50 is OK  I might get the last  LAST, LAST LAST framed built finished tomorrow.  If it doesn't rain...

So close to the end, and chasing the decent weather to the finish, LOL!

But you know, if there weren't surprises all the time in a project, it probably wouldn't be worth writing about it.    Seriously, how exciting would it be to just write "I built 6 framed beds this year"?


* I still had to tap boards around in all the corners until the matched up evenly horizontally AND vertically.  THEN I tightened the clamps hard and drilled pilot holes for the screws.

Pictures in a few days when I finish...

Bleh!

I KNEW it wouldn't be easy gettig a laptop to just connect to the wireless router,.  The laptop asks questions I can't answer.  Verizon said it would just ask for a "SSID and a "WEP KEY".  Yeah, ROTFLMAO!  Worse, it offers options I don't understand.  Even WORSE. I think it is offerring me connections to all the neighborss' wi-fi  (and one is either very innocent or downright dirty).  I don't want to know that stuff.

But I can't get the laptop  working and I used up the battery earlier, so it is charging again (and I'll leave it connected).  I'll call Apple after it is charged.  I think I know the right details for Verizon.  Its the laptop questions I need help with. 

This is why I didn't do this before.  Any two pieces of computer equipment do NOT want to talk to each other...  And I'll mention again  MY BAD LUCK on minor things like this...

Need to do live chat with Apple and that typing kills me.  I bet they tell me to talk to Verizon.  That  makes me the bouncing ball between the two of them...

ARGH!

UPDATE!  With the hour-long struggle with the Verizon tech help (as opposed to the USELESS TWO hours of non-help from Apple)  we have achieved LAPTOPNESS!  I have to say that no matter what the problem and whether it was actually a Verizon issue or not they have helped me through thick and thin.  And yes it is 11:30 AM here and I've been up ALL NIGHT again, struggling with computer challenges , but it was worth it (as it usually is when successful)!

And I have to say my $200 cheapo refurbished MacPro 13" laptop is acting SUPERBIO-PRIMO!

The next comments you get are going to be laptomese and I think The Mews will love it too!

A New Piece Of Equipment

Well, having a desktop computer being my single piece of high tech equipment since my first Commodore computer in 1983, I have LEAPED into the 21st century!

I now have a cheap refurbished 13" screen Mac Laptop.  Its cosmetic condition is way better than promised by the seller (on Amazon.com).  It's sole intended purpose is to visit my (and the Mews) blogging friends.  I figure we can visit our friends on a more regular and timely basis if we have a laptop out in the main part of the house.

I talked to my ISP and confirmed that my existing router should accept a signal from the laptop, and I have the information they SAY is sufficient to connect.  It is charging now, and I will see what happens tomorrow.

According to the seller, I have 30 days to decide if I like it, but I should know on the first day.  It was cheap enough to give it a try without much concern.  Security is no concern, as it won't actually have any information on it.  I mean, it has a good basic set of software, but I won't be keeping any files on it.  If I understand correctly, just reading blogs and not even email won't leave anything to be read except my blog-visiting history, and I can't see what good that would do anyone (though I will add firewalls and such anyway if they aren't already on there).

I do think I want to download a manual for it (wasn't included) to see what I can do with it (or should not do with it for security reasons).  It's portable of course, but I don't plan to use it that way.  I just wanted a remote station to read blogs and possibly browse during TV commercials.  It won't have connectivity to my desktop computer (I will check on that because I don't currently WANT it to).  Mostly, I need to start with one feature and see how that works. 

It seems a reasonable good deal for $200.  The keyboard isn't full size, but it is close.  And I bought a cheap wireless mouse  to go with it.  I typed on it a bit before I started to charge it up and I'll have to be a bit careful.  But its not like I would have to use  it for extensive typing.

And who knows, maybe  this will get me into more of a wireless world.  Which is a bit ironic, because from 1988 to 2006, I was the Telecommunications Manager at a Federal Agency overseeing policy and operations for all the landline and wireless voice services, yet never used any of the wireless stuff myself.

Looking forward to the powered-up laptop access tomorrow!