Pictures Again!

I've been a bit frustrated lately, often not being able to get pictures into the posts.  They would upload in the Choose Files box, but would not transfer to the post.  I even posted a question on the Blogger Help forum (no replies).  So, today I tried the new Blogger interface, and pictures load properly.

Hurray!

I am showing the pictures of the "Poor Old Storm Drain" to add to THIS POST today...

The overview...  Yes, believe it or not there is a 4x4x4 foot brick well and heavy metal grate under there!

At first, I tried to pull the debris off.

Most of it was too entangled.  I wasn't surprised.  The last time the drain was like this, the County needed power equipment!

But I stopped trying as soon as I saw that the brick structure was broken!  You can see part of the brick wall is at an angle.

I also noticed that the metal grate on top is actually shoved OFF the brick structure!  You can also see that the woody debris is packed so tightly that stones washed over the top and wouldn't fall through.

I called County Maintenance and reported the problem.  They politely took all the information, but wouldn't suggest a repair date.  I'll be happy to see them out here by next Spring.  That's about how long it took the last time.  However, I will say that they do good work when they come.

Aquarium, Finished

Having finally gotten the plant light stand finished, I went after the aquarium again.  I tried sealing the leak in the old one twice, and failed.  Evidently, a structural failure in the glass just resists sealing.

So I bought a replacement 30 gallon high tank and got it in place.  It took a lot of pitchers of water to pill it 1/2 way.  I added all the plastic plants in.  I set a 12" long bubble aerator in place.   Oddly, it works better than it used to.  Bubbles all along the length instead on just in 2 spots.  I have no idea why, but I'm glad of it.

It was also good to get the several stylers of fake plants arranged into groups.  It looks a lot more natural now.    "Natural" being a relative term in such an artificial environment.  But I do what I can.

It is not a really fancy aquarium.  I have 8 tiger barbs, a few old serpa tetra, a couple of some rasbora that got added to a bag once by a really incompetent Wal Mart employee, and one really old plecostomus plecostomus (hypostomus plecostomus?).  That guy (gal?) is 8" long and my favorite indidual fish.  I think it is about 10 years old.  Possibly 15.  I didn't record the date.

It is SO LARGE I can't get it in a net.  To get it out of the old tank, I had to use a sieve.  To get it out of the temp tank, I had to put a pitcher in the water and encourage it to "hide" in there while I covered the opening with a net.  Fish are very strong.  I grabbed the pleco once and, at 8 ounces, it was like handling an angry cat!  And it had spines!  Not easy to handle.

So it was a relief to discover I could offer it a lace to hide in a pitcher and then cover the pitcher up with a net and slide it into the new tank!!!

You know where the pleco likes to hide?  Along the back of a piece of petrified wood!  You know where that petrified wood came from?  My dad brought it home one day in (guessing) 1957!  I've had that ever since and it is precious to me.  Cuz Dad gave it to me and I know about fossilized trees.

Hurray for the Pleco!  And hurray for the new fish tank!  I'm so glad it is finally up and running again.

Aquarium Leak

It is almost funny.  I was sitting watching TV an heard a little "Pop".  I assuned the cats had whapped a pen off a desk.

But when I went to feed the fish, I saw a small puddle of water; only a couple of spoonfuls.  Tracking it up from the base with a paper towel, I found the spot.  There was a tiny fracture in a corner.

This is going to sound weird.  To get at an old 20 gallon tank, I had to empty out an understairs closet I have not investigated in years.  It was so old, I found a manual typewriter and an old 8 track player in  there!

But the 20 gallon long was still waterproof, so I got the fish in there.  I will try to seal the 30 gallon high with the silicone sealant I bought today.  I'll give it 2 days to set, then add some water to see if the leak is fixed.

Decks and Other Constructions

Previously, I mentioned construction failures.  Today I show successes.

The small rail is now firmly attached to a metal brace...

The corners are seriously attached with pocket hole screws!

The top rails are solidly attached with 3"deck screws...

And I am fighting the warped deck board with a soaking towel. 

My strongest clamps are not sufficient to force the warped board down flat, so I am using water to encourage the board flat...  Water on the top should force the board flat again.  And then I will keep that board there with several 3" deck screws.

I'm close to rebuilding the 20 year old deck, but there are good reasons to maintain it "tolerably" for another year...

Repairing the Deck

I've been annoyed at these deck failings for a decade.  I thought of attaching splines or Dutchmans to the corners. I didn't like the idea.

Then, a few days ago, it occurred to me that I had bought a Kreg pocket hole jig a few months ago for building a table.  I decided to look and see if it would work on the deck.

It did.  Without any experience at it, just briefly skimming the instructions, it was all obvious.  The one thing they fail to tell you is how to remove the clamp platform (you slide it towards the back and it releases upwards).

I attached the several top rail corners with the pocket holes  I was AMAZED!  Only 2 screws in each top rail connection and the entire top rail was as solid as steel!

Call me stupid for not taking "Before" pictures of the high deck rails.  I too often forget to take "Before" pictures when starting projects.  But here are some "After" pictures.


Here's the "stuff" I was using...

Here is the pocket hole jig...

Here is the nicely joined corner of 2 top rails...

Here are the pocket holes.  They weren't perfect cuz it was my first time and the clamps on it were hard to arrange.  But these pocket holes pulled the joints up tighter than any box or finger joint.  They were SO rigid, that I could not make them shift slightly in ANY way.  WOW!  You HAVE to try this!

Next time, the lower deck with it's own unique problems...

Refrigerator Problems

I replaced an old refrigerator in 2000.  Mainly, I was tired of the fridge section on the bottom (I reach into the veggie tray a lot and the bending over was getting really tiring), and the door opened the wrong way.  Laugh, but I didn't know doors could be reversed at the time...

Well, right after the new one was installed, I learned the door stayed open unless deliberately closed because it was mis-leveled.  I could adjust the levels.  No problem.  Right!

I ended up detaching a wheel and having the whole thing fall on my hand (10 years ago).  I escaped serious injury, but ended up with a front corner on a block of wood.  There it sat for 10 years.  I kept meaning to have a repair service fix it properly, but I let it go.

Well, last year, the cooling started to fail.  I kept moving the control knob to more cooling.  Two weeks ago, I reached the maximum cooling setting.  I'm not stupid, I knew that meant it was running less and less eficiently, probably due to dust bunnies around the cooling tubes behind the fridge.  But I could pull it out to clean it because of the missing wheel.  I even found my owners manual and wrote down the repair telephone number to have the wheel replaces and the unit checked next Monday..

I waited a week too long.  The fridge failed last night!  This morning the fridge temperature was 60F.  The freezer is working just fine, which saved me about $50 in frozen foods.  I know it stayed cold because I keep an ice cube in a small sealed container.  I've done that for years, and it is a good trick.  If you are ever away and the power fails then returns, you will know because the ice cube melts then refreezes flat.  My ice cube was still a cube.

Fortunately, the old refridgerator is still working and down in the basement.  I moved everything I could to it, but there was a lot of stuff I couldn't feel safe about.  All stuff like mayonaise, salad dressings, and raw meat had to be trashed.  And I through out some stuff that was probably safe to keep (mustard, ketchup, tartar sauce).  Why take any chances for cheap stuff?

The old fridge warmed up in the time it took to fill it with the sodas and veggies and fruits and pickles from the upstairs fridge.  It took hours to cool down below 40F.  I suppose I can't even trust the milk I bought today.  So it goes tomorrow.  I guess I put too much volume at 60F in the old fridge for it to cool it all down quickly enough.

The aggravating part is that the soonest brand name repair appointment I can get is next Thursday.  Another generic repair place might be able to come out Tuesday, but I won't know til Monday.  I won't blame them for that because they keep appointment slots open for people who have refrigerated medications to deal with.  Those they take immediately.  That actually says good things for them.

But I may be dealing with awkward cooking arrangements for almost a week.  Blah...

At least I'll get the front wheel replaced so that I can pull the refridgerator out every few months and clean the coolant tubes...  But it serves me right for not dealing with this last year!