Showing posts with label Repairs. Show all posts
Showing posts with label Repairs. Show all posts

Monday, January 9, 2023

Did Some Things

After complaining about minor problems, I meant to list things I managed to do anyway.  OK, I'm a couple days late...

1.  I have 2 birdfeeders.  One is thistle seed for the goldfinches.  Actually 2 feeders there on a movable pipe stand.  Those are easy to refill.  I buy thistle seed in 50# bags and store them in gallon plastic jugs for easy refill.

2.  The other is the black oil sunflower seed feeder for the cardinals, jays, titmouses etc etc.  That one takes the 8' stepladder to refill and is awkward even then.  The stepladder was in the far backyard where I was repairing the garden enclosure chicken wire crushed by heavy snow 2 years ago. 

I dragged it to the sunflower feeder liming all the way.  It could have been worse.  I might have had to just drag it.  But I got it set up.  I had the bucket of sunflower seeds at hand and dumped them in.  And I refilled the 2 suet cages.  I can already see that the birds are appreciating both.

3.  Indoors, from outside, my tray plantings of lettuces and carrots and celery were a mess and there were aphids.  I clipped off what was useful of the lettuce and sprayed the carrots with an organic soap.  Took a week to eliminate them.  They don't seem to like celery.  

4.  I have a 2' x 4' plastic box I mix new soils in.  But this time, I dumped the empty trays of freeze-killed lettuce in.  Watered them slightly and pulled all old roots and a few weeds out.  Mixed in some organic fertilizer and refilled them.  Re-planted them.  Seedlings are emerging now.  Hurray.

5.  But that meant they needed light.  I turned on the light stand power and timer and discovered half the bulbs were burned out.  The lowest ones, of course.  It is really hard to get down on my knees to do bulb replacement.  I spilled a bowl of thistle seeds indented to the pollinator garden and had to sweep it it all back into the bowl.  More bending at the knees...

6.  I got the light stand lights replaced so all are working.  I buy them by the case.  If you want to know, 2500 lumens and 5000K is the best combination for seedling growth.  Since they are on 14 hours per day, they only last a year though.

7.  So, after the lights were working, I had to replant some trays.  And because the trays can overflow with watering and the are electric lights below, I had to get trays under them to catch extra water.   And I have to match trays and emerging seedling to height.  You want the seedlings to stay close to the lights.

8.  So I had to move trays around according to their height.  Lifting objects above my shoulder is literally a "pain".  But it had to be done and I did.  Ouch and all that...

9.  I dragged 2 trash barrels of mown leaves to the compost bin.  The previously composted material had dropped 8" so there was room for more.  Carrying them there was "left foot forward, then right foot forward".  Repeat for 100'...

10.  I collected fallen branches, slowly.  I cut them apart with the bowsaw.  I have enough for a small fireplace fire when I want one.  I had thought to do it New Years Eve, but I was too tired then.  

11.  I did some shopping at Walmart.  For whatever reason, they sell Fancy Food real cheap.  While I was looking for the varieties The Mews like, 2 ladies were also there.  One commented on my cat mask and asked about what I knew about getting their cats to eat.

I mentioned that sprinkling a few kibbles on the top got their hunger activated.  Also that dipping a fingertip in the canned stuff and rubbing it on their nose made them lick it and activated eating.  They were thrilled at the advice.  

12.  I repaired the vacuum cleaner.  Had to take it mostly apart at the bottom, but found the input chute was clogged.  That was a real pain to clear but I finally managed it.  Works great again now.  So I suppose I will have to clean the whole house now.


Thursday, August 18, 2022

Indoors Rain

There was a ferocious downpour here Wednesday night (we got 4" in 2 hours).  I was  preparing dinner and heard an odd dripping sound.  Water was suddenly coming from my ceiling!  I ran to grab some plastic bins from the basement.  Just in time, too.  It got worse real fast, coming from 3 spots close by, but mostly from where I had a plant-hanger ceiling hook.  

Fortunately, the rain did not last as long as forecast, so it could have been a lot worse.  And I didn't sleep well later, listening for more rain.  I had a branch poke a hole in the roof (at a different spot) 10 years ago and had the plywood replaced and the whole roof re-shingled (it was 25 years old anyway).  

So in the morning, I called the original installer to repair the leaky roof.  First, they knew the roof, and second, since 10 years isn't long for a roof, I figured they owed me a decent price.

He said he couldn't get out to me until Monday.  That made sense, downpours get them real busy.  Maybe I should have called a couple other roofers, but at the moment I was fixated of having the original installer do it.  

I was fortunate that rain forecast for Thursday-Sunday didn't happen.  Monday morning, he called to say it would have to be Tuesday.  Thankfully he showed up Tuesday.

Funny story there.  When I pulled the original installation documents from my paper files, they were only 5 miles away from here.  I discovered (when he called Monday) that he had moved 2 counties away since then AND mostly just did work for businesses these days.  But, because he did the re-shingling, he would come out and fix it.  And because I still had a pack of the existing shingles, he agreed it was likely to be a quick job.

And he arrived Tuesday and did the repair.  There were 2 missing shingles.  He replaced those and 2 others (just to be sure).


He was friendly, and the cost was OK.  But he also pointed out the shingles had been missing for a while.

Mea Culpa!  I had found a couple of shingles on the lawn last year.  But my upwind neighbor has about the same color shingles and I thought they were his (blown into my yard in a windstorm).  Really, I looked at my roof from the front and back then and couldn't see any missing.  It was a bad assumption!  

Last month, I happened to use a flashlight in the front hall closet (near where last week's leaks occurred).  The ceiling was black with mold.  I should have called a roofer immediately, but I assumed that since my attic is gets very humid, it was just something to clean and repaint with anti-mold paint.

Well, I was wrong, and paid for my procrastination!

I have stipple ceilings.  I didn't ask for them when the house was built, but I generally like them.  Visual stimulation...  But they are more expensive to repair.  So "great", now I have stains in it in 3 places and there is a 4' mildly broken line in the ceiling.  Apparently, stipple is formed on a 4'x4' support and one edge is loose.

But it all could have been worse and on Thankful Thursday, I am thankful for that...

1.  The roofer went out of his territory to do the repair.

2.  The cost was low.

3.  The ceiling didn't actually fall down.

4.  It didn't rain more even though forecast to do so.

5.  The damage is fixable.

6.  I learned a lesson about procrastination.



Tuesday, June 28, 2022

Garden Enclosure Repairs

 I finally got at the broken garden enclosure PVC/conduit pipe frame the other day.  It was harder than I expected.  The problem with re-attaching 10' pipes is that you really need to be at both ends at once, and my reach doesn't go that far.

So, I had to make supports at one end to attach the other.  2 ladders involved.  And the far end kept slipping off the support.  It was sort of maddening, and a few times the pipes just fell on me.  But when things fall, you just pick them up and try again.  

What do you do then?  Try again.

I didn't want to use PVC cement too often.  Friction holds them pretty well and allows pulling them apart again if required.  But many of the connections were broken enough to really require cementing.  That in itself was awkward.  The cement comes in a can with a built-in brush.  But using too much melts the PVC.  So you have to wipe the brush almost clean.

Standing on a stepladder, holding the PVC pipes generally in place, and then wiping the cement brush around the PVC pipes is not easy.  But all you have to do is succeed once for each one and I managed.  

It went from...


There are some more connections to replace at the sides, but the center one was the hardest and most important.  There is only so much you can do in one day.  

I have to mention that it took more than 2 hands.  Sometimes people don't think about other parts of their bodies.  I supported PVC tubes on my shoulders, lifted chicken wire with my head, and even stuck one PVC tube supported with my suspenders at one point.  Whatever works, LOL!

Next to do, the PVC sides and the chicken wire top...


Wednesday, November 10, 2021

Been Busy

Lori, the new kitten (not everyone who reads THIS blog is cat-addicted) has taken up a lot of my time pre and post arrival.  But there have been other things going on.  


A minor but important event was returning a package of truly horrible frozen meatballs to Safeway (they tasted like ground up hot dogs mushed with Wonder Bread).  Because last year I went from the cashier straight to the Customer Service desk about a mispriced item and the lady there said they didn't accept "returns".  I pointed out I had only travelled 10" to the desk.  She GRUDGINGLY gave me a refund.  It was like I was pulling fish-hooks out of her butt.

So I went online to see Safeway's return policy.  It said they happily refunded any perishable or non-perishable item within the expiration dates.  So with that in hand (literally, I printed it out), I brought the meatballs back, prepared for an argument.

To my surprise, the Customer Service desk person didn't hesitate to give me cash back.  YAY!

Another surprise was to see that one of my upper kitchen cabinets was falling away from the wall.  Well, they are 35 years old...  But it wasn't that the whole cabinet was coming off.  The back for still firmly afixxed.  The cabinet SIDE was loose.

So, get out the glue...  But I couldn't force the side onto the back.  The darn thing was held together with staples!  I probably could have pulled all the staples out (because they wouldn't fit back into the holes and useless if they did.  Brute force seemed the best option.

Start 2 hours of work...  The staples made it hard to force the cabinet side onto the back.  But I'm nothing if not persistent, and persistence overcomes a lot of problems.

I failed in several ways, at first.  Wood glue and pushing had little effect.  But I had a ratcheting cargo bar and tried that.  It wasn't equal to the pressure of the loose staples.  I expressed a LOT of BAD WORDS... 

But I looked at it all again and reconsidered the problem.  That's what persistance is.  I realized the first thing to do was get the side in contact with the back.  So I measured the height to countertop and found things that fit under it.  

You'll love this"  My wood cutting board on end, a can of cat food, and 2 shims levered it up perfectly!  And I found that the cargo bar could be wedged in the open cabinet door at one end and the wall and another cabinet door.

That failed.

OK, the cargo bar had to be secured at both ends so I could actually rachet it without having to hold both ends in place.  



Having figured THAT out, I had to undo everything to squirt wood glue in the loose side and back.  Of COURSE the wood glue was old and the opening was dried.  So I soaked the tip in hot water and cleaned it.

THEN I squirted glue between the loose parts and clamped both ends of the ratchet bar in place.  And set the cutting board, catfood can and shims up tight.  MacGyver's got nothing on me, LOL!  Well, OK, I didn't use a paperclip...

Pushing and shoving, I ratcheted the cargo bar tight as possible.  So far as I could tell, it was a successfully re-joining.  But I also like to be sure.  Extremism in repairs is not a vice and it is not wrong to overdo one.  

So I cut wood strips 1/2" x 1/2" to fit between the shelfs.  That eliminates adjusting the shelves, but since I haven't changed them in 35 years, I probably wont ever need to.  I spread glue on those and wedged then into place with bricks.


I have weird odd tools for reasons.  You never know WHAT you will need sometimes...  

Cabinet, I'll be watching you...

Tuesday, August 31, 2021

Catching Up

Wow, 2 weeks since I posted here!  Well, I've been busy. 

1.  My lettuce trays on the deck "bolted" in the August heat.  Time to replant.  I have a large shallow plastic tub I use for mixing potting soil for Spring plantings.  Fine for dumping the soil in the trays and mixing it around to add new slow-release fertilizer, too.  

I did that on the deck.  No rain forecast for 2 days, so time to let it dry a bit for easier mixing.  Naturally, it rained.  And then more forecast for the next day, so I covered it wit a piece of plywood that almost reached the edges so I added a a big trask bag to reached over the sides.

The rain got in there anyway!  So I tilted it and siphoned the water out.  Muddy water doesn't siphon well, so I had to keep fussing with the tube.  I got most of it out.  And realized I had a dry tray inside, so I added that to soak up the rest.

That's not exactly rocket science, but it does take time.  I covered it better today.  The remnants of Hurricane Ida are coming straight through here Wed and maybe dropping 2-3 inches of rain on us.  The last thing I need for the trays is mud.  It compacts as it dries and I want to replant soon.  I miss my bright red leaf lettuce in my salads!

2.  I bought a battery-powered mower in 2018.  It's pathetic.  I went by Amazon ratings (no offence to Amazon) but I sometimes forget that their ratings only apply to customer ratings about things Amazon sells.  So if they sell average stuff, the best ratings are still about average stuff.

The Greenworks mower I bought has batteries difficult to remove (I devised twine loops to pull them out),  the batteries die after 10 minutes, the power is so weak that the mower cringes at 4" grass being cut down to 3", and it is entirely push/pull.  I've hated it for 3 years!

So I went to Consumer Reports magazine website (I have a subscription) and went looking for the best self-propelled models.  Wow, what a difference!  The one I bought in 2018 was rated poor.  

The best Top 3 ones at CR were about the same.  I bought a Ryobi "40V HP Brushless 21 in. Cordless Battery Walk Behind Self-Propelled Lawn Mower with (2) 6.0 Ah Batteries and Charger", model RY401014US (if you are curious).

I used it yesterday and it worked great.  Powerful, long-lasting. cut down 16" high weeds in an old bed for renovation (with a bit of care).  I had let a tall-growing weed grow there to smother the others.  I love the self-propelled rear drive wheels.  I WAS disappointed to realize that it didn't self-propel in reverse, but apparently none of them do.  My DR brush-mower does and I made an assumption that forward also allowed back.

But I use it in tight spaces and around trees where the riding mower can't go.  It's the forward self-propel that helps the most.

3.  And speaking of the DR brush mower (brutal thing that can cut down weedy shrubs and wild saplings 1.5" thick, turns blackberry canes into mulch, and is self-propelled forwards and back), I left it with gas in the tank 2 years ago (well, I expected to use it again soon but didn't).  Won't start now.  Have to inject the fuel line with "starter fluid".  Sounds like an old boy scout joke about smoke shifters, sky hooks, and 50' of shoreline, but it is real.  

If that doesn't work, back to the repair shop and and they both slow and expensive.  One thing I hate repairing is gasoline engines.  I can fix a lot of things, but those aren't one that comes easily.  

A neighbor once climbed up on the fence and asked if I was good at repairing things.  I said "yeah, as long as it isn't a 2-stroke gasoline engine".  You should have seen the look on his face; that was exactly what he needed help with, LOL!

I am switching to almost all-battery stuff these days.  They just keep working,

4.  Time for my first car maintenance visit.  13 months and I've driven 600 miles!  Laugh if you want to; I just don't drive much.  But I'm going to have to drive 120 mile round trip sometime in September to adopt my female Tonkinese cat, so I need to make sure the car is ready for a trip.

5.  The garden is producing a meal's worth of flat italian Romano beans every other day.  Not bad for a 5' long 1' wide trellis".  My 3 cherry tomatoes have fruits and I expect to strt picking ripe one in 2 weeks.  The regular-size tomatoes were planted late and are just beginning to open blossoms.  It will be a contest between warm-weather growing and the first frost on late October.  I expect a month's worth at least.  Maybe 6 weeks.

6.  The deck Mums are starting to bloom.  Yellow, orange, and red.  That will be nice.

7.  The Black-Eyed Susans are blooming nicely.


Actually, they are very numerous and spreading.  Well, they are native here. so no threat.  I encourage them.  They bloom for a few months.  My plan is to transplant the Susans in the garden paths to the meadow bed and add purple coneflower transplants (from places I don't want them).  Yellow and purple together look good to me.


Wednesday, July 7, 2021

A Good Past Couple Days

As the title says, a good couple days.  Started Tuesday grocery-shopping.  I'm not happy without fresh fruits and veggies, and holidays always throw my shopping schedule off.  People come out in masses for picnic, BBQ, and travelling supplies.  The lines are long.  So if I forget to shop 3 days before, I wait til the day after.  And I forgot that (since July 4th was a Sunday) July 5th would be an "observed Federal holiday" and govt contractors general follow the Feds (for the practical reason that there is no one for them to talk to).

So I shopped Tuesday.  It was nice to have broccoli, asparagus, and buttercrunch lettuce.  It was nice to have peaches, berries, cherries, grapes, and oranges.  

In the afternoon, I FINALLY planted a lot of flower seedlings in the newly-cleared bed where I planted pole beans a month ago.  The beans are 6' tall already.  But because they are on a trellis, they only use a 6" strip at the edge.  So there was all that extra space.  Those green things in the bed are pulled weeds, brushed off before I planted.

I had all these perennial and self-sow seedlings, so in they went!  I got 3/4 of all my flower seedlings in the ground.  It doesn't really matter if they do all that well this year.  They will be good enough for transplanting to more permanent spots in the late Fall.  After planting them, I watered them deeply.

I had done some repair work on a fan-sprayer a few days before.  The holes were clogged and poking a needle into the holes didn't improve things much...

So I drilled out all the holes.  Unfortunately, my smallest drill bit was larger than the original holes, so the water didn't spray very far.  But I realized I had made a high-volume, low-pressure fan nozzle.  That has been quite useful.  Had I realized the consequences of the larger holes, I would have done it deliberately before.  I still have 2 other fan sprayers that work as intended, so nothing but a gain in this.

Yeah, I built the tripod it sits on...  Very adjustable.  So I replaced the 2 nozzles with a stadard fan nozzle.  The drilled fan nozzle is great for raised beds as it waters from edge to edge quickly.  The round nozzle is on the deck hose since the round spray suits the round planter pots well.

Which left the next major problem the overgrown daffodil/tulip bed.  They don't care about the weeds, but there were blackberries and loosestrife invading the bed.  The bed is about a 30' circle, and there are daylilies growing along the edge, a sunflower bird-feeder in the center and a 4x4" post to level the stepladder I need to fill the feeder.  

So I took out the riding mower to clear the weeds and blackberries.  It was awkward guiding a large mower in a small space, but fortunately this new mower has a button that allows the engine to keep the blade turning while in reverse.  And the blade deck is slightly offset to one side so you can get at edges with the wheels getting in the way

I was able to (slowly) mow almost everything I didn't want down close to the edging.  There were places I couldn't get at.  That's where the hedge trimmer came out.  I was able to cut down the weeds and grass right up against the edging.

More importantly, I was able to slide the narrow hedge-trimmer blade between the daylilies and cut off the wild blackberries near ground level.  In a couple of days the cut stuff will turn brown and I will know what to rake out.  That will let me see which weeds and canes I missed for another go with the hedge trimmer.  The battery was running down and needed recharging anyway.

The riding mower was set at 3" height (there is a path of  pavers and I didn't want to chance hitting one with the mower blade) .  Now that most of the weeds are cut down that low (and I can see where the pavers are),  I can use the small electric mower set at 1" to cut them down further.  Then I will will cover all the non-daylily area with permeable black fabric to kill the weeds by next Spring when the daffodils want to emerge.  

I covered it with solid black plastic a few year which worked OK except rain pooled on depressions and mosquitoes grew there so I kept having to poke wholes in it.  THe permeable fabric will solve THAT problem.

The transplanted flower seedlings seemed a bit beaten down by the sun,  so I watered them again.  It is amazing how much water dry soil needs sometimes.  The first watering a couple days ago had an inch of water pooled on the top before it soaked in.  Even then, my moisture meter today showed it was dry 6" down.  So another full inch of water on them.

And I put up a shade cloth for them.  The pole beans provide some dappled shade in the morning, and a couple of trees provide late-afternoon dappled shade, but mid-day is full-on sun.  So I stuck a a couple of 6' stakes in the ground and clipped a shade cloth on them.  Covers most of them.  By complete lucky coincidence the seedlings that want the most sunlight aren't covered.

I wish I had more pictures to show.  I forget when I'm doing gardening stuff.  Too-focussed, LOL!  If the transplanted seedlings survive the shock, I will have pictures to show in a few days.

I have a dozen Balsam flowers and a few Maltese Cross to plant.  I have a few places I can put them, but haven't decided where yet.  I think about that tomorrow.


Thursday, July 1, 2021

Repairs

The vaccuum cleaner suddenly sucked.  By which I mean it failed to.  It's not like I overuse the poor thing.  :)

But I vacuumed the bedroom carpet and was still stepping on "bits"  (Ayla likes to eat in the bedroom).  So I checked the bag.  Empty.  I disconnected the hose and checked it.  Empty.  It's a cannister vacuum so I checked and I disconnected the tube from the head and hose.  Empty.

"SIGH*  I know what that means.  The Power Nozzle (that part on the floor) was clogged.  So... I took it of the push-tube and examined it.  There were 6 bolts holding it together.  I coudn't see what the heads of the bolts were but guessed at phillips-head and was right.  

Took a while to loosen them.  The 2 halves of the power nozzle still didn't want to separate.  Well, usually anything that is put together can be unput together, so I examined it for a while.  I could see the different halves of it (different colors made it sort of obvious) but I couldn't get them to separate.

I finally realized that 2 bolts I thought were loose weren't.  I went at them harder (they didn't want to release at first).  But succeeded.  And it still required some prying and pulling.    It gave a liitle, so I knew it wasn't locked in place with catch-pins (those evil things that are designed to connect together once and never to be unattached except with special tools).

I got the final 2 bolts ("machine screws" technically as they don't have nuts on the other end and are more like untapered screws).  And finally the 2 halves of the power nozzle can apart.

It was packed full of cat hair.  I shouldn't have been surprised, I suppose, but isn't that what a vacuum cleaner with a powered brush is SUPPOSED to remove successfully?

Talk about a mess!  The entire thing was packed with cat hair (and around here, that is what "dust bunnies" ARE.  It's not like *I* shed much.  :)

The brush roller looked like a cat hair brush used too often.  And when I removed that, I discovered the entire 10" of tube leading to the hose was packed.  The cat hair wasn't even GETTING into the sucky tube, nevermind the collection bag.  

I was amazed at how much cat fur I pulled out of the power nozzle.  I think there was a "Marley-volume of fur".  But with pulling some out with needle-nose pliers and pushing at the back end with the handle of a screwdriver, I got it all cleaned.  There were some deep corners with fur and the pliers got those too.

But to be sure, I took the power nozzle out on the deck and banged it on the rails.  Bits of dried food and grit came out!  Quite a lot.  So I took it back in to reassemble the power nozzle.  

The brushbar didn't want to stay in place.  So I thought of what the part HAD to look like and went back out the deck to find it.  I did, and was exactly what I thought it would look like.  Fit back perfectly.

I screwed all the machine bolts back in but was missing one.  Damn, more searching.  Finally found it on the lawn below where I banged the grit out on the rail.  Whew!

Then I re-vaccuumed the bedroom carpet.  Worked perfectly.  So I tied a label to the hose "Not Working?  Clean power nozzle".  I don't have the world's best memory, so reminders help.  10 years from now, when I've forgotten about this, that will give me a clue!


Thursday, February 4, 2021

Some Random Thoughts...

As I review my posts, I noticed something I have failed to mention.  I have been oddly temperature-sensitive since the accident.  I have normally kept the house at 72F daytime and drop it to 68 at night (having a heated waterbed has some benefits).  And in daytime at 72, in Winter just I usually wear light slacks and flannel shirts (cuffs rolled up).

Since the accident, I've felt cold.  I expect that is because I haven't been as active but it may be some reaction to healing as well.  I had to bump the temperature up to 74F night and day and even then, sometimes wear a sweater in daytime.  I should have remembered to ask my Dr about that.

Also, I notice that, even drinking about a gallon of water per day (yes, I fill an actual gallon jug), I often feel dehydrated.  I initially blamed the meds, but I'm not on any anymore.  What's causing that?  It's not like I spend the day eating bread or crackers...

It's funny how the accident stopped all my projects in mid-work.  I was in the basement and noticed one that I started THAT DAY!  Because I seldom drive far or often, my old Toyota car battery tended to get discharged.  So a few years ago, I bought a "battery-minder".  It is a smart version of a trickle-charger.  Starts and stops when needed and you can leave it plugged in.  

It kept the old 2005 Toyota running and I noticed the new Subaru was slower to start too.  My fault for not driving much (joke - I couldn't drive at ALL for almost a month).  The Toyota dealer said "well drive 15 minutes every couple of days".  But I don't.  So I have the battery-minder.  But you can't just slam the hood on the wires.  It has to come through the grill.

Guess what?  The cable doesn't reach the battery in the Subaru.  But it came with 2 different cables.  SO, I cut them to splice them together for enough length.  Now, you have to understand that, as willing (and usually successful) as I am at SIMPLE repairs, electrical tape is the bane of my existence (next to 2-stroke gasoline engines like on chain saws).  The stuff sticks to ME like flypaper and I can't get it wrapped neatly around wire splices.

But I had a bottle of "liquid rubber" and was applying it THAT DAY before I heard Laz yelling for help.  It is still there today.  I suspect it is "well-set" by now, LOL!  I feel up to completing that repair now and feeding the cable back through the grill to the battery.

NOW, I'll attack it with electric tape.  It is probably safe from shorts now with all that stuff on it. LOL!

And I won't have to worry about draining the battery again on lots of short errands...

Plus, maybe my best chess game ever against a computer!  If you follow this sort of thing:  I'm White.

A double-rook sacrifice...  I NEEDED a game like that!  LOL...

I continue to feel and walk better.  I'm still stiff when I first get up in the morning or have been sitting too long, but that goes away more quickly lately.  The stairs are easier and I can now carry things AND go up and down almost normally.  

I took the last of the prescription-strength 600mg Ibuprophen today, which is OK.  I think I can get along with an over-the-counter 200mg one 2x  a day.  I dislike taking meds; there is always SOME level of side-effects or consequences if you take them too long.


Saturday, November 14, 2020

Undergrowth

Three years ago, after failing to find anyone who would clear 1/8 acre of wild blackberries and small junk saplings, I bought a brush mower.  It is like a super-heavy-duty lawnmower.  The blade is bigger and heavier.  It has forward and reverse powered wheels.  It cuts down sapling 1 1/2" thick.  It grinds up debris like a chipper-shredder.

DR Field and Brush Mower

It worked great!  Cleared that whole area in 2 hours.  But all gas-powered machines need some basic maintenance and I am terrible about leaving old gas in the tanks.  It goes bad in the tank and leaves some parts sticky with dried gas.

That Spring, there wasn't much new undergrowth, so I thought I had killed it.  There was some growth  that Fall, but I planted 4 decorative trees (2 Sourwoods and 2 Korean Dogwoods) expecting that the shade of the trees would keep the undergrowth down (I used to have junk trees there that did that) and I would just brush-cut again THIS Spring.

Couldn't get it to start.   I gave a half-hearted try of soaking up the old gas with an old towel and then spraying carburetor cleaner into the tank and carburetor and adding a small amount of new gas.  No luck.

I probably could to a complete carburetor removal and cleaning.  I've done it before.  It a pain.  And I have a regular lawn mower than needs the same work.  I decided to just let a professional do them both.  Which requires delivering them to a repair shop.  Remember a couple days ago I mentioned my trailer was full of yard debris and I was waiting for the recycling center to dry and it won't because of all the rain?  I kept waiting.  And waiting.

I guess I am just going to have put on my mud boots and get rid of the yard debris.  Then bring the brush mower and regular mower to the repair place and wait for a month for them to fix them.  I can clear the brush in Winter as well as I can today.  And maybe that makes the blackberries die being cut down out of season (one can always hope).

One thing I am ceetain of is that, after years of this, I will either drain the gas from all my equipment or add gas stabilizer to the tanks!  

My "TO DO" list has gotten too long for me to mess with gas engines.  I'm losing ground on it the list.  It is probably the thing I CAN do that I like the least.  There is too much to do inside the house easier to do the than the things I like least.  And that would cost the same for professional help.

I also am making a list of professional improvements I want for the house (I'm not even going to TRY to install linoleum floors or wall tile).  But that's a future post. 

Monday, January 6, 2020

Heat Pump

It's working, but getting worrisome.  In freezing weather, it has a frost-thaw cycle in the outside part that usually lasts about 5 seconds before the heat cycle comes on.  Lately, it has been taking 15-20 seconds.  Not much difference, but changes aren't good.  And 2 nights ago, during a cooling cycle, it started making rattling noises.  That's not normal at all.

So, for once, before it heat pump just stops, I called the installer and arranged for a diagnostic visit.  They arrive tomorrow afternoon.  I sure hope the rattley sound is just a loose fan blade of something.  But whatever, I hope it is something easily fixable.

I have bad luck with heat pumps.  They usually die on a friday night on the hottest day of Summer and I have to suffer several days before they can come out to repair it.  Historically, it has needed replacement every 7-8 years.  Once one died in mid-Winter.  I can deal with cold a bit better than hot, but it still isn't fun.  I mean, I can add more clothes but there is a limit to how much I can take off.

If they find something simple to repair (or nothing or major repairs, come to think of it), I can at least get an annual maintenance contract at a good price and I think I will.  Knowing my luck, THAT should guarantee nothing ever fails again, LOL!  But it would be worth it.

I am one of those people who think that anything working should keep working.  It's illogical.  It like with my gardens and flowerbeds.  I keep thinking that, once weeded, they should STAY that way.  They don't.  ;(

The heat pump company gives the general "4 hour" range for arrival.  But at least this one calls a half hour that day before they anticipate arriving.  That helps.

UPDATE:

The heat pump was overcharged.  Over-pressurized.  The technician discharged "enough".   And because they overcharged it initially, all they charged was the visit.  I didn't argue about it.

It was sufficient that he immediately heard the same problem I did (and that is rare), fixed it, and left.  It was raining, and I held a BIG golf umbrella over him while he worked.  That got some good will.

He also gave me some useful advice.  I bump the heat up in the morning and use the a/c to cool down at night.  He said stop doing that.  "Open a window at night and use the fan, heat pumps don't like cooling the house when it is below 50F outside". 

OK, live and learn.  Wish someone had told me that 33 years ago.  My heat pumps die every 7-8 years.  My neighbors' heat pumps don't.  I've asked.  Now maybe I know why...

Tuesday, November 26, 2019

Cleaning Leads To More Cleaning

All I wanted to do was clean the bathroom.  I did the usual from up to down and then it came time to mop the floor.

The sqeezie sponge disintegrated!  The local stores did not stock a replacement.  So, I wiped the floor with small towel from a bucket.  And then wiped it again with clean water.  The mats were drying after being soaked in the laundry tub with a bit of laundry detergent.  After they were rinsed several times the next day outside (garden hose and I left them out to be rained on), I waited for them to dry.

They wouldn't.  Cold humidity is really useless for drying.  It took 5 days for them to get half dry and then I just dragged them into the basement and waited.  And waited.  So they eventually dried and I was ready to put them back in place.

But there was dry grit on the floor, so I decided to vacuum the floor with my stick vacuum.  After a pass, there was more dirt on the floor then before.  Oh damn.  So I dragged the larger cannister vacuum out.  That was useless!  No pickup at all.

So I checked the both for being filled.  The stick bagless container was empty.  The cannister bag was empty.  That meant problems.

I'm not the world's best fix-it guy.  But I can try some things by logic.  It took 15 minutes to figure out how to take the cannister suction head apart.  I got the screws all loose easily, but nothing wanted to come aprt.  Which made no sense.  What were the screws for?

It occurred to me to turn the suction head over.  Then the top came right off.  You wouldn't belief what I found inside!  The entire suction head was packed with cat hair.  There was almost an entire cat in there.  And to be fair given the length, a fair amount of my own hair.

I started by just picking stuff out from the brushes.  Then I realized it was far more involved.  I got some pliers to pull more out. But if I had it to do over again, I would have brought it to the garage and used the air compressor and blow it all out faster.

On the other hand, I know more about the insides of the suction head, so maybe it was worth it.  In any case, when I put it back together, it worked like NEW!  Dang the sucker (literally) worked great.  So I did the rest of the house.

That's how things go sometimes.  You try to do a small thing and it turns into a big thing and you are glad you did it.  I did the whole kitchen like that last week.  Started with cleaning the M/W and the entire kitchen was clean 3 hours later.

And I did get the bathroom mats set back in place...




Friday, July 12, 2019

Surprises, And Not Good Ones

This is becoming a really difficult few weeks.  Some of which I have mentioned, but it is worth listing all of  it (and positively noting that none are matters of life and death)...

First, I got the riding mower back from the repair shop after a month with only half the work I THOUGHT I was getting done.  Granted, they didn't try to charge me for what they didn't do, but they wanted another 3 weeks to get to get at it, so I passed.  I CAN actually change the oil and filter and sharpen the blades (the undone work) myself but its a pain and they could have done it so easily while they had it.  I had even called them later in the day I brought it to them to confirm it was on the repair list (they said yes).

Second, the monsoon damage (6"+ of sudden rain) Monday flooding the drainage easement.  When I moved here almost 33 years ago, I knew my new street was at the bottom of a large sloped neighborhood, but it seemed that the drainage was well-managed with drainage easements and storm drains.  I was wrong.  Also, I was not aware that property owners were responsible for the drainage easement further than 6' from the storm drains.

Storms usually bring tree debris down that covers the storm drain grate.  That can be removed easily sometimes, and the County willingly does it when stuff is all wedged together and called about it.  This time was different.  For reasons I do not know, cubic yards/meters of clay and gravel flowed down the easement for the first time ever.  The storm drain grate was entirely covered with it.

The easement itself (which WAS almost 2' deep) is entirely filled to lawn level with gravel about 20' upslope and most of that is NOT County responsibility.  I spoke to my neighbor about it (we are co-responsible for the easement maintenance).  I have no idea what it would cost and return the easement to full functionality.  My neighbor is upset because they are they are nearly broke.  I can legally enforce shared costs, but I'm not looking forward to having to fight about it.  But if it isn't dredged, future storms will make matters worse and they care less about their yard than I do.

Third, the monsoon damage again. My basement got soaked an inch.  The builder did poor work on the sunken patio originally (no drainage), and I've had water in the basement several times over the years.  I learned after the first time that if I dug a 4' deep ditch through the lawn downslope, all was well.  But those fill in over time and I usually redig it each year before hurricane season.

We are getting heavier rains here earlier each year and I waited too long.  Climate change is real.  The last Spring frost of the year is about a day earlier each couple years and the first frost in Fall is later.  The first heat wave of the year  comes sooner and occurs later too.

I need to at least bury some perforated drainage pipe along the lawn edge of the patio and attach it to solid drainage pipe emptying into the lower front lawn.  But it always seems there is something more immediately to do.  So I didn't do it earlier this year or last year.

The basement was a real mess!  This time I had a lot of boxes on the floor.  The stuff like lawn fertilizer have plastic bags inside, so they weren't damaged, but I had some boards standing up against walls, cardboard boxes I was planning to use to store books while the computer room going to be changed from 32 year old carpet to linoleum.  And Iza likes to poop outside the litter boxes, so that was a real mess.

I used the wet/dry shop vac to suck up most of the water and moved the litter boxes to dry area where Iza wouldn't "go" is the wet spots.  Today, it dried enough for me to scrape the cement floor of all the kicked-out scoopable litter and poops.  I love Iza dearly, but pooping in the litter boxes is not one of the things she does best...

After that, I mopped the whole litterbox area with soapy water, mopped it with clean water, and sucked up the remaining water with the shop vac.  It wasn't a thrill.  I rinsed out the mop frequently in the laundry tub, but it wasn't exactly dry,  and I don't have a mop-wringer tub so I had to squeeze the mop dryish by hand.

I should mention that I was the oldest child at 15 when my younger sister was born.  I changed a LOT of diapers.  And that was when you had to slosh soiled cloth diapers around in the toilet before you could even put them in the bucket the diaper cleaning truck came by to pick them up for professional cleaning.

Fourth, monsoon damage again.  I had a masonry repair company estimator here today.  Here is what he told me after investigating all the broken cinder blocks and spaces around it...

The wall is a "retaining wall" (there is soil filled in behind it).  A retaining wall should be set outside of the cement slab and 3' deep so that water pressure cannot push it in.  The top caps need special  grout to help hold the top solid.  My retaining wall was built ON the cement slab and the tops were attached with regular grout.

He said the entire 2 1/2 sides needed to be removed, a 3' deep trench dug outside the cement slab, and that there was rebar involved and removal of the old cinderblocks.

Quick estimate - $15,000

And I should have a drain installed to prevent future basement next to the sliding glass doors $2,300.

I said no way!  I could have my failing asphalt driveway removed, the foundation rebuilt and pounded solid, and a new concrete driveway installed for that.  I have an estimate for that...

I asked about just forcing the existing cinder block wall force back into place, using construction adhesive against the broken edges and bolting a 2"x10" board or serious metal bar on top.

He said he wouldn't do that as a professional and that his insurance company wouldn't warranty the work if he did.

I thanked him for coming by to explain all that and that I understood his reasons for not doing some cheap patchwork and that I might be back in touch because the repair does really have to be done.  I might add that contractors generally hate being the first ones on site because the customer learns things about what to ask the next estimator.  And it's true...  I learned a lot.

So after he left, I decided to see if I could lever the broken wall parts back in place.  There are 2 6"x6" wooden deck support posts in the patio set 3' deep and surrounded by 2' wide in cement.   I found a 4"x4" post that straddled them, and a 4x4 post that just reached  cinderblock wall.  I figured that with the right angle of leverage, I might be able to push the broken parts back in place after liberally covering the broken edges with construction adhesive.  That stuff is stronger than the grout used between cinder blocks so it ought to hold.

I understand how levers work most effectively.  The longer the lever, the more force is applied.  I set 4x4 posts up as efficiently as possible.  I couldn't move the wall at all!  30 minutes work at 92F and 95% humidity and pulling as hard as I could left me exhausted and drenched in sweat.  I may take the car jack and see if I can get some better force tomorrow.

If that doesn't work, I think I will find some less-perfectionist company to suggest something less expensive.

I have several home renovation projects in mind.  But given the numerous ones and these new problems, I think I might be better off combining them into a large list and hiring a general contractor.  I did that once and the total cost was about half of the estimated costs from individual contractors.  The downside of that is that I need to empty whole rooms (and OMC the cluttered basement!) at the same time (almost like moving out)...

I wish I had had the nerve to move away 5 years ago...  Maybe I should consider that again and leave it as a fixer-upper.  I get offers in the mail every day.




Thursday, May 30, 2019

Frozen Indecisively

Have you ever hit a decision where you kept changing your mind?  I had that problem the past week and that sort of thing really gets me locked-up internally and I can't really get anythng else done until I resolve the issue. 

It doesn't have to be a really serious problem like a decision about medical treatment or a big financial decision.  Just something where you can't make up your mind.  Military training teaches you (I have read) to deal with a 50-50 decision by just choosing one.  But my profession was an an analyst and the thought there is that nothing is "50-50".  That there has to be some additional information that will make it at least 51-49...

My issue this past 2 weeks was my riding lawn mower.  A little background...  I mowed the family lawn starting at age 12 (and hated it).  I got several summer jobs at 15-16 (and hated it).  My first serious Summer job was mowing lawns at an army base during Summer Vacation (and I hated it).  And I still had to mow the family lawn (1/2 acre) until I left for college.

Not-very-fun story:  The month I left for college, Dad bought a riding lawn mower because my brother (who was only 2 years younger) simply refused to mow the lawn, and Dad sure didn't want to use the push mower). 

At my first 2 rental houses (with other people), part of my contribution to the general maintenance was (naturally) mowing the lawn.  When I bought my house, I had to mow the lawn.  When I bought the house, I was broke and owed my parents money for the down-payment.  When I paid that off in a year, I had to replace the old car. 

So, don't be surprised that my first voluntary purchase was a Riding Lawn Mower!  I was thrilled.  It was a rather cheap model but I kept it going for 11 years.  By that time, I could buy a GOOD One.  It is 18 years old and needs serious maintenance.  I can do the basics, but this time it is suddenly hesitating, then stalling.  If I let it sit for about 15 minutes, it starts right up again and runs well for another 10 minutes, then hesitates and stalls again.

I decided it was time for a new riding mower, and equipment always gets better, right?  I am a True Believer in Consumer Reports magazine ratings.  They never steer me wrong.  So when I looked and saw that Jogn Deere riding mowers were the top 4 rated ones, I felt certain that I should choose one of them.  I found 2 that seems to suit me.

But, as I've mentioned, I'm an analyst, and I read the negative reviews of those mowers on other sites.  I was shocked by what I read.  Apparently "new" is not always better.

The first thing I learned was that virtually all riding mowers made in the US are made by a single company with minor differences (according to brand names) about the engine and deck construction.  Like major brands and store brands of canned beans etc all mostly coming from the same producer.

The complaints I saw involved 3 problems.  Most new riding mowers use "hydrostatic transmissions".  I won't pretend to understand the details, but it seems that they are cheaper to build.  The cons are that they lack durability and require frequent maintenance. and are not good under load (hauling a trailer or mowing up even mild slopes.

The 2nd problem was that most of the newer engines are damaged by ethanol gasoline (the routine gas at gas stations).  You can by premixed gas at auto shops or a stabilizer yo add yourself.  Either way, it doubles the cost of fuel.  That adds up.

The 3rd problem is they are more expensive to maintain and repair. 

I didn't just look at one site about this.  I searched several.  They all said about the same thing.  And some were so technically detailed about the problems (many by repair-persons), that I had to accept their negative opinions about the newer riding mowers. 

So my option was to have the current one repaired again, hoping that in a few years, the current problems would be solved.  Basically, up to $400 for the current one this year vs $2,000 for a new one that would be more expensive to run and maintain and could well be expected to last only 5-6 years.

So tht has been keeping me uncertain in the day and worrying at night.  I had "bad lawn mower dreams" 2 nights.

To make it worse, "Angies List", a site that collects user ratings of business and denies business postings gave the only local repair shop I have used for lawn mower repair a C rating.  But I looked at that closely. On the lawn mower repair only, they got seventeen 5 ratings, seven 4 ratings, one 2 rating, and one 1 rating.  And the bad ratings were for "promptness".  And they got a good rating for price. 

So I delivered the riding mower to them Tuesday.  Sure enough, they said it would be a week before they got it up on their bench to provide a detailed estimate and a week after that before the work was completed if I accepted their quote. 

The good parts were that the desk clerk you writes the repair ticket seems to know exactly what I was describing about the hesitations and stalls.  And the guy "around the back" where I actually turned over the mower  asked a few good question and wrote down my answers.

So...  I bet it will take 3 weeks and the mower will be working great for a few more years.

Meanwhile, I'll have to use the battery-powered push mower a couple of times.  A battery lasts 20 minutes on that (but there are 2 of them).  So I'll have to mow the lawn in pieces. 

But at least I finally made a decision about whether to replace the current mower.  I slept well that night and got busy outside the next day.  Nothing like having a weight off your shoulders...

I'm going to send Consumer Reports a letter asking about their ratings.  But I suspect they will say they rate existing products and are not really in the business of comparing then to older ones.  Seems fair.


Wednesday, October 10, 2018

2005 Toyota Highlander Car

I wanna new car,
Without scratches and dents,
One that looks like it should,
That costs only pence.

I wanna new car.
Electric would be good. 
That could haul a small trailer
And a small boat too.

I wanna a new car,
13 years is quite long
Its starting to die,
And it won't be long.

I wanna new car,
Black was never right.
You can't see that car,
In the dead of night.

I wanna new car,
Another SUV.
The height gets me up
Over headlights, you see.

I wanna a new car,
For the pride, ya'll.
But it has to fit the garage,

And the door's kinna small.

I wanna new car,
Without tech-stuff, ya know.
I don't call when driving,
And I know where I am.

I wanna new car,
One that keeps me alive,
And keeps me protected
In front or behind.

I wanna new car,
Hydrogen's good
But there ain't that stuff
In the neighborhood.

I wanna new car,
But maybe keep what I've got.
Get it detailed and painted,
Let mechanics fix it up.

I wanna a new car,
I could buy one you see.
But this one could last,
Another 10 years and three.



Monday, November 14, 2016

While I Was Gone

I moped around the house for a couple days and stayed in bed a lot.  Then I got up and did some hard angry work.

I took out the 10" electric tiller that I bought a few months ago for work in small spaces and attacked the area where I want to plant 200 daffofdl bulbs.  That didn't work out too well.  The tall grass wrapped around the tiller blades.  So I spent 15 minutes cutting and pulling them loose.  Then took out my weed whacker and cut all the grass to ground level.  Then went after the soil again.

That didn't work out any better.  The ROOTS just wrapped around the tiller blades.  So I removed THEM.  It was rather therapeutic.  Burned off some anger.  I attacked them with a ground digger knife and pliers and by hand.

But the small electric tiller is obviously only designed for bare ground and flowers.  So I pulled out the big gas one.  Which wouldn't start.  Old dried gas I suspect.  I'll try it again tomorrow after some new gas has a chance to dissolve the old gas.  And if that doesn't work, I can take apart the carburator.  I learned a trick from a repairman about shooting spray carburator cleaner into the system that often works.  Failing that, it goes to a local repair shop for real repair and tune up, and it has been a few years so it needs it.

I did get a lot of angry energy used up pulling on the starter rope.

The manual rotary mower wouldn't start either and I read online that that usually means the blade disengagement bar on the handle is stuck.  I couldn't find anything wrong with it, so that has to go for professional work too.

I better check the snowblower too.  When you need it is NOT the time to go looking for fast repairs.

I have a small cast iron Lodge grill good for cooking a couple of steaks at a time.   I didn't use it for a couple of years.  I stayed under my covered smoker grill, and with a cover of it's own.  I pulled it out a few weeks ago and it was COMPLETELY rusted under 2 covers!

Perfect "angry energy" project!  I wirebrushed that sucker for 3 hours.  THAT got a lot of anger out.  Still wasn't good enough.  It will never be free of rust again.  But I have a 1,000F temperature wood stove Rust-Oleum paint I can use on most of it.

According to online advice, the cooking surface will have to be soaking in 50% white vinegar and water for 4 hours, rubbed dry with a clean cloth, and then oiled and seasoned in a 300F oven like any new cast iron skillet.  If that all works, I will buy a tightly sealed plastic bin to keep it in afterwards.  If it doesn't, I'll buy a new one.  Maybe I can just buy a cooking rack replacement.

I had a nice little steel one decades ago.  Just the right size for 6 charcoal briquets and one steak.   I wish I still had that.  I can't find one like it.  Some stuff just seems to disappear over the years.  Maybe it burned through the bottom.  I can't recall.

Still need some projects to burn off "angry energy".   Maybe it is time to bring out the steel spade and start scraping under the roots of weedy grass in the flower garden.  I still can't kneel well, but if I sit on the ground and push on the back of the spade with my feet, that should work. 








Thursday, July 14, 2016

It's Always SOMETHING!

I'd love to go days without some problem or other.  A garden hose starts leaking one day so I have to splice it.  I go to my regular barber shop another day and all of a sudden, they want appointments.  Etc.

So I walked down into the basement after dinner and there is water on the floor around the heat pump unit.  The insides unit was almost entirely replaced just in April!  Well, I've had this happen before and there are various causes.  A heat pump inside unit takes humidity out of the inside air.  The condensation collects in a tray, which drains through a pipe to a reservoir that holds about a quart (liter).  When it is filled, a float activates a pump that sends it to the laundry tub for drainage. 

So, the collection tray can get loose and spill water, the pipe can come loose and spill water, the float can fail and spill water out an overflow hole in the reservoir, or the discharge tube can get blocked and spill water backed out the reservoir overflow hole.  There may be other things that can cause water spillage, but those are the ones *I* have experienced. 

After the 1st time, where I paid someone a few hundred dollars to reattach a loose pipe, I have solved them all myself.

This time was messy.  I quickly figured out that the reservoir was full of "goop".  I don't want to be gross here, but it seems to have been some combination of algae and bacterial slime.  Think of it as "thin jello" if that is easier.  LOL!  I knew I had to get the top of the reservoir off , but the modern things get, the more perverse the attachments are.  The manufacturers assume you will call them for repairs and so they consider the parts disposable.  THEY will just slap on a new part.  For several hundred dollars...  The parts aren't designed to be taken apart and fixed.

I took it apart and fixed it...

I had to break a few attachments to get the damn top off finally, cement and duct tape hold things together afterwards very well.  But getting the top of the reservoir off was just the 1st step.  It still wasn't a large opening, and I had to get the sludge out.  Aha, my wet/dry shop vac!  Sucked most of it out.  A large bottle brush grabbed most of the rest.  Refilling, bottle-brushing, and vacuuming the reservoir a few more times got it pretty clean.

But there was still "stuff" inside the reservoir pump itself.  I got into the slots where the water enters the pump with an awl and slowly got most of it out.  When I put it all back together and filled the reservoir a few times, it automatically emptied the reservoir each time.   Hurray!

I dried the floor with an old towel so that I can see if there is any more spillage overnight.   I'll add some bleach to the reservoir when I go shopping tomorrow.  Naturally (and somewhat ironically) I JUST used the last of it yesterday cleaning the laundry tub of some orange growth - which must have been coming from the reservoir discharge just before it failed). 

And it JUST occurred to me that I can add a PVC pipe to the overflow hole to lead into a 5 gallon bucket underneath it so I get some warning about a problem next time. 

Not that I will need that, but the effort will certainly assure the overflow problem NEVER happens again.  You know the rule:  Any problem you make efforts to prevent will never occur again (but if you don't, it will)!

I buy 3-month filters for the heat pump.  And because of cat hair and who knows what else, I replace them every 2 months.  I've added a note on the heat pump to add 1/8 cup of bleach to the reservoir each time too.

I hope the next problem gives me a few days before it occurs...

Wednesday, May 18, 2016

Various Thoughts

1.  I emailed the company that repaired my heat pump, complaining about the qualifications of the regular repairman they sent (who was only saved when the Repair Manager came by to actually do the work).  After the Repair Manager left, the regular repairman used my hose to fill a bucket to divert the old coolant into and though I saw him turn the spigot off, he didn't do it completely.  Three mornings later, I saw water spraying out of a broken hose connection.  He hadn't turned it off completely!  The pressure stayed on for 3 days and I have NO idea how much water sprayed out as waste (that I will pay for).  They haven't replied yet.

2.  I have a company coming to remove/redo the entire tub area of a bathroom.  They keep calling to change the arrival time.  I don't consider that a good sign.  Darn good thing I am retired and my time is flexible.  Yesterday, they were coming today; then Monday; now Friday.

3.  I'm cleaning house before the bathroom demolition crew arrives.  Is that stupid or what?  Like they care?  Well, it needed cleaning and I needed the encouragement.  If I had more vistors, I would clean more often.

4.  I came across some odd stories lately.   The first one where some parent had to explain to the grandparents that the son couldn't read their letters because he couldn't read "cursive".  Oh damn, I feel ancient!  Like I've been writing in hieroglyphs...

Then there was the couple who visited Yellowstone Park and decided a baby bison was "too cold".  They "rescued" it into their SUV.  When they turned it in to the Park because they couldn't really feed it, the Mother and herd rejected it.  It had to euthanized.

Which reminds me of the idiot hunter (and I respect most hunters as knowledgeable having being one myself) who reported he had "captured" a deer.  It was a goat...

Which reminds me of the farmer who had had a cow shot by a hunter.  So he spray painted "COW" on all his remaining herd in bright red.  Yeah, some idiot shot one of them too, thinking it was a deer.

5.  I set up several 10-20' circles in the newly leveled parts of the back yard.  In one, I spread several pounds of "wildflower" seeds to create a natural area for pollinator bees and butterfly caterpillars to thrive.  So far, I have one orange flower and the same weeds that are growing in other places around the yards.  I may have to grow plants from seeds indoors and transplant them outside.

6.  I'm making a list of things for a general contractor to do.  There are things I can do myself and things I can't.  And some of the things I can't, I used to be able to do and just won't now.  I did electrical work in the basement when I was 35 and (one and only one time) I made a mistake and if I hadn't been sitting on a wood ladder, I would have electrocuted myself.

I felt "the buzz"...  And that's not the first time.  I once pulled of the spark plug wire on a running car and had the same "shock".  I'm lucky to be alive.

I know wood.  Wood can't normally kill you.  I'll stick to that.  For the other stuff, I'm hiring people!

Thursday, May 12, 2016

The Heat Pump Pictures

Darn, I forgot I had pictures of the repair.  So for what it's worth...

Jeff, the repair manager called me before the repair and said he had good news.  The supplier (who aparently controls warrantee replacements), had said they didn't have the specific "Thermal eXchange Valve" (TXV) available for my unit, but that he "bitched and complained" and they agreed to provide a whole "coil".

I had no idea what that meant, but if the repair manager was happy, that seemed good.  Well, it was more significant than I thought!  The TXV seems to be that little gold colored thing in the center.  The "coil" is the entire guts of the inside unit!
Really, they took out everything!
And here is the new (for free after 6 year's use) replacement!
The guy on the left is the repair manager.  The guy on the right is the "so-called" repairman.   HE didn't have a clue about what to do.  The repair manager kept teaching him every step of the way!
And if I had not called the repair manager with concerns about repairguy, repairguy would have tried to do all that work and messed up royally!  Note the Repair Manager is doing all the work.  Even the heavy lifting!  

The replacement units are not IDENTICAL to the original ones.  He had to cut away some side sheet metal to make it fit.  But HE knew about that and repairguy didn't...  I can only imagine (with shudders) what repairguy would have struggled to do to make it fit.  Hammerring maybe?
The replacement unit didn't fit to Repair Manager's satisfaction.  Out it came for more shaping....
Then back in and Repair Manager was happy.   And if he's happy, I probably will be happy...
And to my surprise, there was welding involved!  And guess who did it.  Quite frankly, the Repair Manager wasn't letting the repairguy do ANYTHING important.
Welding going on.  I'm surprised the camera could take this pic!
Back outside for replacing the coolant, even THEN Repair Manager was doing all the work while repairguy stood around not paying attention.  I think I could reach repairguy's skill level in a week of training!  Well, for one thing, I would pay careful attention...
And again, repairguy is watching while Repair Manager shows how to do basic stuff.  And I mean that.  Is there anything more basic to heating and cooling systems than loading coolant?  On the other hand, repairguy is the one who overpressured my system by 4x in Feb and caused most of currentthe problems...
So Repair Manager left after the mechanical problems were fixed and there were "only" measurement to be recorded.  I'm not sure repairguy knew how to do THAT right.  He kept calling some other people on his phone asking questions. 

BUT, after 3 days of switching the system from heat to cooling, the system is working better than I recall from the initial installation.  There MAY have been problems from the start.  I dropped the temperature from 72 to 68F in 30 minutes.  That used to take an hour.  Raising the temperature is faster, but it happened faster than usual.

I am glad of this repair.

But I think the success was all because I complained to the company first about problems with the previous repair, and then the Repair Manager when I was not pleased with the repairguy they sent.  And Repair Manager did almost all of the work himself!  Let that be a lesson to you...  Demand the best-qualified person to do the job...

The Heat Pump...

The repairmen came, they went.  In their wake, they SEEM to have left me with a working heat pump.

I was worried when the repairman showed up.  It was the same guy who messed up my system in Feb.  While he started working on the unit, I called the office repair manager.  He called back a few minutes later to assure me that the guy he sent was especially good at replacing parts.  But also would come by in 30 minutes (from another job) to make sure all went smoothly.

And it was a damn good thing he did.  Because the repair manager had to do most of the work himself!  He had promised me a free part and free labor, but I did not know the free "part" was almost the entire inside unit.

It took them 4 hours.  Because of some gradual equipment changes, the replacement coil was not a "pull and replace" unit.  The manager went "hands on" to it, cutting some sheet metal to fit.  I got a kick out of saying to the sent repair guy "This is why I worked to be Manager, so as to not have to do this stuff".

The "sent" guy would not have known to do that shaping work.  If I hadn't called, he might STILL BE HERE 6 hours later botching the job.  And that is a lesson learned.  If a simple repair is done right, great.  If a complicated repair is done well by a talented repairman, great!.. But if a repair is in the middle and they send the simple repairman to fix it, you need a Manager!

And did this guy know his stuff!  It was like watching a surgeon.

And it got better!  A few times when he was waiting for equipment to provide results, I asked a few questions.  Apparently, they were good questions.  Having a Dad as an engineer helps...

So I mentioned understanding gas expansion cooling, and he mentioned that he had taken AP classes in physics, so we had a great discussion about dark matter and dark energy and fun stuff while his equipment measured pressures and temperature changes.

Geez, I hope managing a heat pump repair unit pays well...

Anyway, the high pressure whistling sound is gone inside and out, the screeching sound of the outside fan is gone, the heating and cooling seem to be working, and all I had to pay for was the coolant.

I hope I feel as happy in mid-summer and next winter!  The repair company maybe doesn't have the best basic repairmen, but they sure stand by their promise to make everything right eventually.  That sounds like a back-handed compliment, but I mean better than that.  They COULD have just fought my complaints and said go call someone else if I wasn't happy, but they didn't.

It was 70 degrees outside.  They heated the house up to 80 and cooled it down to 65 in just an hour.  AFAICT, that means it is working.

And BTW, Iza is a Very Brave Cat .  She followed us all around, watching what was going on.  Marley an Ayla hid in the bedroom.  Iza got extra treats after they left.  She is a "Snoopervisor Extraordinary"!

Monday, May 9, 2016

Statuses

Well, the good news is that my Heat Pump is scheduled to be fixed tomorrow morning.  The repair company called me this morning.  They got their supplier to provide the part for free, they are doing the labor for free, I will pay for the replacement coolant ($200).

I accepted.  They could have given me a bunch of technical runaround "proving" none of it was their fault, but they didn't.  And I get the 1st appointment of the day, so I won't have to sit around waiting in a 4-hour window.

It will be good to having the heat pump working properly again (possibly for the 1st time ever).  My electric company sends me monthly reports showing that my Winter electrical usage is 3x the average of my neighbors (Summer is close).  And I have been extraordinarily fortunate that the outside temperature has been unusually moderate (highs of 70 and lows of 55 for almost 2 weeks while the system was completely off).  I'm a real warm-bodied person and don't sleep well above 70.

I'm patiently waiting for the bathtub tile replacement.  The entire tile surround and backerboard will be replaced, as well as the faucet and temperature valve, the showerhead, soap dish, towelrack, and the tub itself.  I guess for a cheaply built "starter house",  30 years was long enough before some repairs were needed.

I was encouraged when the remodeler said not to use the tub before the replacement work (2 weeks hence) so that they could better tell if any moisture on the studs behind the walls was just dampness from the leaks or actual damaged.

I know that its routine for bathroom remodelers to go for increases to the work required claiming unseen stud damage or mold.  That the remodeler seems to be trying to make sure any such signs of moisture are real is probably why they have an "A" rating on Angie's List.

The aggravation is that they say the work will take 10 days.  I have a showerstall in a half bath to use, but I don't like it much.  And I'm not thrilled about having to be available for workers here 4 or 5 days (it takes 10 days, but they won't be here every day - some things need time to "set").  But after a year of increasingly worsening tiles problems it will be worth it.

My knee (twisted on April 5th) is still not normal again, but I can walk straight-forward almost as usual.  I still feel it on stairs and getting into bed.  I've missed the whole Spring on yardwork, though and the weeds are taking over.  I'll be busy when I can dig again!

Looking Up

 While I was outside with The Mews, I laid back and looked up.  I thought the tree branches and the clouds were kind of nice. Nothing import...